Orientador: Carlos Alberto Canesin / Resumo: Frente aos novos desafios impostos ao cenário energético mundial, esta tese de doutorado implementa e analisa uma micro-rede de geração distribuída (GD), com acumulação e capacidade de operação conectada ou desconectada da rede de distribuição de energia elétrica (RDEE). A energia é fornecida à RDEE através de seis inversores monofásicos, constituindo uma rede trifásica, sendo três deles com capacidade de operação ilhada e conectada, e outros três com características de fonte de corrente que podem injetar energia de forma controlada, ativa ou reativa, no ponto de conexão comum (PCC). Através do sistema de acumulação com baterias do tipo chumbo-ácido, também é possível que o sistema minimize o consumo de energia da RDEE, mesmo quando não há energia solar, extraindo potência das baterias. Tendo em vista que a quase totalidade dos inversores utilizados em um sistema de GD fornecem somente potência ativa, ou trabalhem com fator de potência fixo, este trabalho também implementa o controle dinâmico de P e Q na micro-rede, atuando como compensador de tensão no PCC e promovendo melhorias na qualidade da energia elétrica. A micro-rede é gerenciada por um programa desenvolvido para o controle de todos os dispositivos essenciais presentes na GD, incluindo controle da carga e descarga do sistema de acumulação, controle dos contatores de conexão de todo o sistema, e controle do firmware dos inversores conectados, permitindo total liberdade de gestão da energia disponível, resultando numa ... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: Considering the new challenges imposed in the energetic scenario around the world, this PhD thesis implements and analyzes a micro-grid of Distributed Generation (DG) plant with accumulation and capability of operation connected or islanded from the electric power distribution grid. The system will supply power to the utility grid and local loads through six single-phase inverters, constituting a three-phase system, among which three are with capability to operate in islanded and connected mode, and the other three single-phase inverters with current source characteristic that can inject active or reactive power in a controlled manner at the point of common coupling (PCC). Through the accumulation system with lead-acid batteries technology, it is also possible that the system minimizes the utility grid consumption, though without solar energy. Given that most of the available inverters for DG are designed only to provide active power or to operate with a fixed power factor, this work, in the meantime, implements the dynamic control of the supplied active and reactive power (P and Q) in micro-grid, acting as a voltage compensator at the PCC to improve the quality of electric power. The micro-grid is managed by software designed to control and communicate with all essential devices in DG, including control of charge and discharge of the accumulation system, control of the whole system connection contactors, and the firmware control of grid connected inverters, which allow a wid... (Complete abstract click electronic access below) / Doutor

Orientador: Prof. Dr. Alfeu Joãozinho Sguarezi Filho / Dissertação (mestrado) - Universidade Federal do ABC, Programa de Pós-Graduação em Engenharia Elétrica, 2015. / Inicialmente, este trabalho apresenta aspectos de viabilidade e técnicos para a construção de sistemas de geração eólicos. Nele é disposto uma breve literatura de alguns dos conversores elétricos utilizados para diferentes tipos de geradores. Por fim, este trabalho propõe um método de ajuste de ganhos dos controladores proporcionais-integrais através do emprego do método por compensação de polos da função de transferência do sistema em malha fechada, para o conversor do lado do rotor, com objetivo de garantir controle estável do fluxo das potências ativa e reativa de estator do GIRB. Também, serão apresentadas as malhas de controle do conversor conectado à rede elétrica. Resultados obtidos através de simulação computacional deste sistema de controle são apresentados para validar a proposta. / This work includes feasibility and technical aspects for the construction of wind generation systems. In it, there is disposed a brief literature some electrical converters used for different types of generators. It also presents a design method for the gains of the proportional-integral controllers used in power vector control of DFIG connected to the grid in wind power generation systems where GIRB is connected directly to the power grid and its rotor through a converter called "back to back". The rotor controllers will be adjusted with the use of the method for compensating poles of the system's transfer function in closed loop. Also, the converter control loops connected to the grid will be displayed. Results from computer simulation of this control system are presented to validate the proposal.

Submitted by MARCOS GUTIERREZ ALVES null (mmarkos.alves@gmail.com) on 2017-10-18T17:25:15Z No. of bitstreams: 1 Marcos Gutierrez Alves - Tese.pdf: 10359243 bytes, checksum: 24da24ccb395d0581201cc49607f4bf6 (MD5) / Approved for entry into archive by Luiz Galeffi (luizgaleffi@gmail.com) on 2017-10-23T18:18:25Z (GMT) No. of bitstreams: 1 alves_mg_dr_ilha.pdf: 10359243 bytes, checksum: 24da24ccb395d0581201cc49607f4bf6 (MD5) / Made available in DSpace on 2017-10-23T18:18:25Z (GMT). No. of bitstreams: 1 alves_mg_dr_ilha.pdf: 10359243 bytes, checksum: 24da24ccb395d0581201cc49607f4bf6 (MD5) Previous issue date: 2017-08-21 / Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) / Frente aos novos desafios impostos ao cenário energético mundial, esta tese de doutorado implementa e analisa uma micro-rede de geração distribuída (GD), com acumulação e capacidade de operação conectada ou desconectada da rede de distribuição de energia elétrica (RDEE). A energia é fornecida à RDEE através de seis inversores monofásicos, constituindo uma rede trifásica, sendo três deles com capacidade de operação ilhada e conectada, e outros três com características de fonte de corrente que podem injetar energia de forma controlada, ativa ou reativa, no ponto de conexão comum (PCC). Através do sistema de acumulação com baterias do tipo chumbo-ácido, também é possível que o sistema minimize o consumo de energia da RDEE, mesmo quando não há energia solar, extraindo potência das baterias. Tendo em vista que a quase totalidade dos inversores utilizados em um sistema de GD fornecem somente potência ativa, ou trabalhem com fator de potência fixo, este trabalho também implementa o controle dinâmico de P e Q na micro-rede, atuando como compensador de tensão no PCC e promovendo melhorias na qualidade da energia elétrica. A micro-rede é gerenciada por um programa desenvolvido para o controle de todos os dispositivos essenciais presentes na GD, incluindo controle da carga e descarga do sistema de acumulação, controle dos contatores de conexão de todo o sistema, e controle do firmware dos inversores conectados, permitindo total liberdade de gestão da energia disponível, resultando numa importante ferramenta acadêmica de aprendizagem. Adicionalmente, a planta de GD é monitorada por meio de um programa de aquisição de dados do fluxo de energia elétrica que flui entre a GD e a RDEE, armazenando os dados relevantes em um banco de dados de informações para análises em longo prazo. É apresentada uma revisão bibliográfica para o cenário energético mundial e no Brasil, além das configurações de micro-rede com GD mais utilizadas no setor atualmente. O diagrama geral da micro-rede com GD é exposto, com descrição de cada equipamento e dimensionamento das fontes de energia solar. Finalmente, resultados experimentais e estruturas dos códigos são apresentados e discutidos. / Considering the new challenges imposed in the energetic scenario around the world, this PhD thesis implements and analyzes a micro-grid of Distributed Generation (DG) plant with accumulation and capability of operation connected or islanded from the electric power distribution grid. The system will supply power to the utility grid and local loads through six single-phase inverters, constituting a three-phase system, among which three are with capability to operate in islanded and connected mode, and the other three single-phase inverters with current source characteristic that can inject active or reactive power in a controlled manner at the point of common coupling (PCC). Through the accumulation system with lead-acid batteries technology, it is also possible that the system minimizes the utility grid consumption, though without solar energy. Given that most of the available inverters for DG are designed only to provide active power or to operate with a fixed power factor, this work, in the meantime, implements the dynamic control of the supplied active and reactive power (P and Q) in micro-grid, acting as a voltage compensator at the PCC to improve the quality of electric power. The micro-grid is managed by software designed to control and communicate with all essential devices in DG, including control of charge and discharge of the accumulation system, control of the whole system connection contactors, and the firmware control of grid connected inverters, which allow a wide control over the available energy and provide a significant academic studying platform. In addition, the energy flow between the DG and the utility grid is monitored through a power quality monitoring device, which is capable to send daily reports by email. In this way, a program was developed to store and recover all the relevant data in a database for the long-term analysis, compiling the results for easy interpretation. A literature review is presented for the world energy scenario, with more focus in Brazil, besides the micro-grid configurations with DG most used in the sector currently. This work also shows the general diagram of the micro-grid with DG describing the equipment and dimensioning the solar energy sources. Finally, it demonstrates and discusses experimental results and code structures.

Attempts to reduce greenhouse gas emissions are promising with the recent dramatic increase of installed renewable energy sources (RES) capacity. Integration of large intermittent renewable resources affects smart grid systems in several significant ways, such as transient and voltage stability, existing protection scheme, and power leveling and energy balancing. To protect the grid from threats related to these issues, utilities impose rigorous technical requirements, more importantly, focusing on fault ride through requirements and active/reactive power responses following disturbances. This dissertation is aimed at developing and verifying the advanced and algorithmic methods for specification of protection schemes, reactive power capability and power control requirements for interconnection of the RESs to the smart grid systems. The first findings of this dissertation verified that the integration of large RESs become more promising from the energy-saving, and downsizing perspective by introducing a resistive superconducting fault current limiter (SFCL) as a self-healing equipment. The proposed SFCL decreased the activation of the conventional control scheme for the wind power plant (WPP), such as dc braking chopper and fast pitch angle control systems, thereby increased the reliability of the system. A static synchronous compensator (STATCOM) has been proposed to assist with the uninterrupted operation of the doubly-fed induction generators (DFIGs)-based WTs during grid disturbances. The key motivation of this study was to design a new computational intelligence technique based on a multi-objective optimization problem (MOP), for the online coordinated reactive power control between the DFIG and the STATCOM in order to improve the low voltage ride-through (LVRT) capability of the WT during the fault, and to smooth low-frequency oscillations of the active power during the recovery. Furthermore, the application of a three-phase single-stage module-integrated converter (MIC) incorporated into a grid-tied photovoltaic (PV) system was investigated in this dissertation. A new current control scheme based on multivariable PI controller, with a faster dynamic and superior axis decoupling capability compared with the conventional PI control method, was developed and experimentally evaluated for three-phase PV MIC system. Finally, a study was conducted based on the framework of stochastic game theory to enable a power system to dynamically survive concurrent severe multi-failure events, before such failures turn into a full blown cascading failure. This effort provides reliable strategies in the form of insightful guidelines on how to deploy limited budgets for protecting critical components of the smart grid systems.

The installation of wind power plant has significantly increased since several years due to the recent necessity of creating renewable and clean energy sources. Before the accomplishment of a wind power project many pre-studies are required in order to verify the possibility of integrating a wind power plant in the electrical network. The creation of models in different software and their simulation can bring the insurance of a secure operation that meets the numerous requirements imposed by the electrical system. Hence, this Master thesis work consists in the creation of a wind turbine model. This model represents the turbines installed at Lillgrund wind farm, the biggest wind power plant in Sweden. The objectives of this project are to first develop an accurate model of the wind turbines installed at Lillgrund wind farm and further to use it in different kinds of simulations. Those simulations test the wind turbine operating according to different control modes. Also, a power quality analysis is carried out studying in particular two power quality phenomena, namely, the response to voltage sags and the harmonic distortion. The model is created in the software PSCAD that enables the dynamic and static simulations of electromagnetic and electromechanical systems. The model of the wind turbine contains the electrical machine, the power electronics (converters), and the controls of the wind turbine. Especially, three different control modes, e.g., voltage control, reactive power control and power factor control, are implemented, tested and compared. The model is tested according to different cases of voltage sag and the study verifies the fault-ride through capability of the turbine. Moreover, a harmonics analysis is done. Eventually the work concludes about two power quality parameters.