<div>We describe a new task called The Amazing Race: Robot Edition. In this task, the robot is placed in a real, unknown environment, without a map, and asked to find a designated location. It will need to explore its surroundings, find and approach people, engage them in a dialogue to obtain directions to the goal, and follow those directions to the hallway with the goal. We describe and implement a variety of robotic behaviors that performs each of these functions. We test these in the real world in test environments that were distinct from the training environments where we developed our methods and trained our models. Additionally, these test environments were completely unmodified and reflect the state of the real world.</div><div>First, we describe how our robotic system solves this problem where the environment is constrained to a single floor or a single building. We demonstrate that we are able to find a goal location in never-before-seen environments. Next, we describe a machine-learned approach to the dialogue and components of our system to make it more robust to the diversity and noisiness of navigational instructions someone may provide.</div>

Disasters especially from natural phenomena are inevitable. The affected areas recover from the aftermath of a natural disaster with the support from various agents participating in humanitarian operations. There are several domains of the operation, and distributing relief aids is one. For distribution, satisfying the demand for relief aid is important since the condition of the environment is unfavorable to affected people and resources needed for the victim’s life are scarce. However, it becomes problematic when the logistic agents believed to be work properly fail to deliver the emergency goods because of the capacity loss induced from the environment after disasters. This study was proposed to address the problem of logistic agents’ unexpected incapacity which hinders scheduled distribution. The decrease in a logistic agent’s supply capability delays<br>achieving the goal of supplying required relief goods to the affected people which further endangers them. Regarding the stated problem, this study explored the importance of<br>setting the profile of logistic agents that can survive for certain duration of times. Therefore, this research defines the “survivability” and the profile of logistic agents for surviving the last mile distribution through agent based modeling and simulation. Through simulations, this study uncovered that the logistic exercise could gain survivability with the certain number and organization of logistic agents. Proper formation of organization establish the logistics’ survivability, but excessive size can threaten the survivability.

<div>Path planning is the generation of paths for the robots to navigate based on some constraints. Coverage path planning is where the robots needs to cover an entire work space for various applications like sensing, inspection and so on. Though there are numerous works on 2D coverage and also coverage using a single robot, the works on 3D coverage and multi-agents are very limited. This thesis makes several contributions to multi-agent path planning for 3D structures.</div><div><br></div><div>Motivated by the inspection of 3D structures, especially airplanes, we present a 3D coverage path planning algorithm for a multi-UAV system. We propose a unified method, where the viewpoints selection and path generation are done simultaneously for multiple UAVs. The approach is scalable in terms of number of UAVs and is also robust to models with variations in geometry. The proposed method also distributes the task uniformly amongst the multiple UAVs involved and hence making the best use of the robotics team. The uniform task distribution is an integral part of the path planner. Various performance measures of the paths generated in terms of coverage, path length and time also has been presented. </div>

The thesis introduces an innovative UAV detection system. The commercial UAV market is booming. Meanwhile, the risks and threats from improper UAV usages are also booming. CUAS is to protect the public and facilities. The problem is a lack of an intelligent platform which can adapt many sensors for UAV detection. The hypothesis is that, the system can track the UAV’s movement by applying the multi-agent system (MAS) to UAV route track. The experiment proves that the multi-agent system benefits for the UAV track. <br>

<div>Enhancing the capability to control a tremendous range of physical actuators and sensors, combined with wireless technology and the Internet of Things (IoT), apparel technologies play a significant role in supporting safe, comfortable and healthy living, observing each customer’s conditions. Since apparel technologies have advanced to enable humans to work as a team with the clothing they wear, the interaction between a human and apparel is further enhanced with the introduction of sensors, wireless network, and artificially intelligent techniques. A variety of wearable technologies have been developed and spread to meet the needs of customers, however, some wearable devices are considered as non-practical tech-oriented, not consumer-oriented.</div><div>The purpose of this research is to develop an apparel system which integrates intelligent autonomous agents, human-based sensors, wireless network protocol, mobile application management system and a zipper robot. This research is an augmentation to the existing research and literature, which are limited to the zipping and unzipping process without much built in intelligence. This research is to face the challenges of the elderly and people with self-care difficulties. The intent is to provide a scientific path for intelligent zipper robot systems with potential, not only to help people, but also to be commercialized.</div><div>The research develops an intelligent system to control of zippers fixed on garments, based on the profile and desire of the human. The theoretical and practical elements of developing small, integrated, intelligent zipper robots that interact with an application by using a lightweight MQTT protocol for application in the daily lives of diverse populations of people with physical challenges. The system functions as intelligent automatized garment to ensure users could positively utilize a zipper robot device to assist in putting on garments which also makes them feel comfortable wearing and interacting with the system. This research is an approach towards the “future of fashion”, and the goal is to incentivize and inspire others to develop new instances of wearable robots and sensors that help people with specific needs to live a better life.</div>

Networked telerobots are operated by humans through remote interactions and have found applications in unstructured environments, such as outer space, underwater, telesurgery, manufacturing etc. In precision agricultural robotics, target monitoring, recognition and detection is a complex task, requiring expertise, hence more efficiently performed by collaborative human-robot systems. A HUB is an online portal, a platform to create and share scientific and advanced computing tools. HUB-CI is a similar tool developed by PRISM center at Purdue University to enable cyber-augmented collaborative interactions over cyber-supported complex systems. Unlike previous HUBs, HUB-CI enables both physical and virtual collaboration between several groups of human users along with relevant cyber-physical agents. This research, sponsored in part by the Binational Agricultural Research and Development Fund (BARD), implements the HUB-CI model to improve the Collaborative Intelligence (CI) of an agricultural telerobotic system for early detection of anomalies in pepper plants grown in greenhouses. Specific CI tools developed for this purpose include: (1) Spectral image segmentation for detecting and mapping to anomalies in growing pepper plants; (2) Workflow/task administration protocols for managing/coordinating interactions between software, hardware, and human agents, engaged in the monitoring and detection, which would reliably lead to precise, responsive mitigation. These CI tools aim to minimize interactions’ conflicts and errors that may impede detection effectiveness, thus reducing crops quality. Simulated experiments performed show that planned and optimized collaborative interactions with HUB-CI (as opposed to ad-hoc interactions) yield significantly fewer errors and better detection by improving the system efficiency by between 210% to 255%. The anomaly detection method was tested on the spectral image data available in terms of number of anomalous pixels for healthy plants, and plants with stresses providing statistically significant results between the different classifications of plant health using ANOVA tests (P-value = 0). Hence, it improves system productivity by leveraging collaboration and learning based tools for precise monitoring for healthy growth of pepper plants in greenhouses.

<p>By using flexible and stretchable materials in place of fixed components, soft robots can materially adapt or change to their environment, providing built-in safeties for robotic operation around humans or fragile, delicate objects. And yet, building a robot out of only soft and flexible materials can be a significant challenge depending on the tasks that the robot needs to perform, for example if the robot were to need to exert higher forces (even temporarily) or self-report its current state (as it deforms unexpectedly around external objects). Thus, the appeal of multifunctional materials for soft robots, wherein the materials used to build the body of the robot also provide actuation, sensing, or even simply electrical connections, all while maintaining the original vision of environmental adaptability or safe interactions. Multifunctional material systems are explored throughout the body of this dissertation in three ways: (1) Sensor integration into high strain actuators for state estimation and closed-loop control. (2) Simplified control of multifunctional material systems by enabling multiple functions through a single input stimulus (<i>i.e.</i>, only requiring one source of input power). (3) Presenting a solution for the open challenge of controlling both well established and newly developed thermally-responsive soft robotic materials through an on-body, high strain, uniform, Joule-heating energy source. Notably, these explorations are not isolated from each other as, for example, work towards creating a new material for thermal control also facilitated embedded sensory feedback. The work presented in this dissertation paves a way forward for multifunctional material integration, towards the end-goal of full-functioning soft robots, as well as (more broadly) design methodologies for other safety-forward or adaptability-forward technologies.</p>

The onset of Industry 4.0 has provided considerable benefits to Intelligent Cyber-Physical Systems (ICPS), with technologies such as internet of things, wireless sensing, cognitive computing and artificial intelligence to improve automation and control. However, with increasing automation, the “human” element in industrial systems is often overlooked for the sake of standardization. While automation aims to redirect the workload of human to standardized and programmable entities, humans possess qualities such as cognitive awareness, perception and intuition which cannot be automated (or programmatically replicated) but can provide automated systems with much needed robustness and sustainability, especially in unstructured and dynamic environments. Incorporating tangible human skills and knowledge within industrial environments is an essential function of “Human-in-the-loop” (HITL) Systems, a term for systems powerfully augmented by different qualities of human agents. The primary challenge, however, lies in the realistic modelling and application of these qualities; an accurate human model must be developed, integrated and tested within different cyber-physical workflows to 1) validate the assumed advantages, investments and 2) ensure optimized collaboration between entities. Agricultural Robotic Systems (ARS) are an example of such cyber-physical systems (CPS) which, in order to reduce reliance on traditional human-intensive approaches, leverage sensor networks, autonomous robotics and vision systems and for the early detection of diseases in greenhouse plants. Complete elimination of humans from such environments can prove sub-optimal given that greenhouses present a host of dynamic conditions and interactions which cannot be explicitly defined or managed automatically. Supported by efficient algorithms for sampling, routing and search, HITL augmentation into ARS can provide improved detection capabilities, system performance and stability, while also reducing the workload of humans as compared to traditional methods. This research thus studies the modelling and integration of humans into the loop of ARS, using simulation techniques and employing intelligent protocols for optimized interactions. Human qualities are modelled in human “classes” within an event-based, discrete time simulation developed in Python. A logic controller based on collaborative intelligence (HUB-CI) efficiently dictates workflow logic, owing to the multi-agent and multi-algorithm nature of the system. Two integration hierarchies are simulated to study different types of integrations of HITL: Sequential, and Shared Integration. System performance metrics such as costs, number of tasks and classification accuracy are measured and compared for different collaboration protocols within each hierarchy, to verify the impact of chosen sampling and search algorithms. The experiments performed show the statistically significant advantages of HUB-CI based protocol over traditional protocols in terms of collaborative task performance and disease detectability, thus justifying added investment due to the inclusion of HITL. The results also discuss the competitive factors between both integrations, laying out the relative advantages and disadvantages and the scope for further research. Improving human modelling and expanding the range of human activities within the loop can help to improve the practicality and accuracy of the simulation in replicating an HITL-ARS. Finally, the research also discusses the development of a user-interface software based on ARS methodologies to test the system in the real-world.<br>

This thesis is concerned with the analysis of economic network formation. There are three novel sections to this thesis (Chapters 5, 6 and 8). In the first, the non-cooperative communication network formation model of Bala and Goyal (2000) (BG) is re-assessed under conditions of no inertia. It is found that the Strict Nash circle (or wheel) structure is still the equilibrium outcome for n = 3 under no inertia. However, a counter-example for n = 4 shows that with no inertia infinite cycles are possible, and hence the system does not converge. In fact, cycles are found to quickly dominate outcomes for n > 4 and further numerical simulations of conditions approximating no inertia (probability of updating > 0.8 to 1) indicate that cycles account for a dramatic slowing of convergence times. These results, together with the experimental evidence of Falk and Kosfeld (2003) (FK) motivate the second contribution of this thesis. A novel artificial agent model is constructed that allows for a vast strategy space (including the Best Response) and permits agents to learn from each other as was indicated by the FK results. After calibration, this model replicates many of the FK experimental results and finds that an externality exploiting ratio of benefits and costs (rather than the difference) combined with a simple altruism score is a good proxy for the human objective function. Furthermore, the inequity aversion results of FK are found to arise as an emergent property of the system. The third novel section of this thesis turns to the nature of network formation in a trust-based context. A modified Iterated Prisoners' Dilemma (IPD) model is developed which enables agents to play an additional and costly network forming action. Initially, canonical analytical results are obtained despite this modification under uniform (non-local) interactions. However, as agent network decisions are 'turned on' persistent cooperation is observed. Furthermore, in contrast to the vast majority of non-local, or static network models in the literature, it is found that a-periodic, complex dynamics result for the system in the long-run. Subsequent analysis of this regime indicates that the network dynamics have fingerprints of self-organized criticality (SOC). Whilst evidence for SOC is found in many physical systems, such dynamics have been seldom, if ever, reported in the strategic interaction literature.

<div>There are millions of individuals in the world who currently experience limited mobility as a result of aging, stroke, injuries to the brain or spinal cord, and certain neurological diseases. Robotic Assistive Devices (RADs) have shown superiority in helping people with limited mobility by providing physical movement assistance. However, RADs currently existing on the market for people with limited mobility are still far from intelligent.</div><div><br></div><div>Learning control strategies are developed in this study to make a Cable-Driven Assistive Device (CDAD) intelligent in assisting a human joint (e.g., a knee joint, an ankle joint, or a wrist joint). CDADs are a type of RADs designed based on Cable-Driven Parallel Robots (CDPRs). A PID–FNN control strategy and DDPG-based strategies are proposed to allow a CDAD to learn physical human-robot interactions when controlling the pose of the human joint. Both pose-tracking and trajectory-tracking tasks are designed to evaluate the PID–FNN control strategy and the DDPG-based strategies through simulations. Simulations are conducted in the Gazebo simulator using an example CDAD with three degrees of freedom and four cables. Simulation results show that the proposed PID–FNN control strategy and DDPG-based strategies work in controlling a CDAD with proper learning.</div>