1 |
Degradation of Vinyl Chloride and 1,2-Dichloroethane by Advanced Reduction ProcessesLiu, Xu 16 December 2013 (has links)
A new treatment technology, called Advanced Reduction Process (ARP), was developed by combining UV irradiation with reducing reagents to produce highly reactive species that degrade contaminants rapidly. Vinyl chloride (VC) and 1,2-dichloroethane (1,2-DCA) pose threats to humans and the environment due to their high toxicity and carcinogenicity. In this study, batch experiments were conducted under anaerobic conditions to investigate the degradations of VC and 1,2-DCA with various ARP that combined UV with dithionite, sulfite, sulfide or ferrous iron. Complete degradation of both target compounds was achieved by all ARP and the reactions were found to follow pseudo-first-order decay kinetics. The effects of pH, sulfite dose, UV light intensity and initial contaminant concentration on the degradation kinetics were investigated in the photochemical degradation of VC and 1,2-DCA by the sulfite/UV ARP. The rate constants were generally promoted by raising the solution pH. The optimal pH conditions for VC and 1,2-DCA degradation were pH 9 and pH 11,respectively. Higher sulfite dose and light intensity were found to increase the rate constants linearly for both target contaminants. A near reciprocal relation between the rate constant and initial concentration of target compounds was observed in the degradation of 1,2-DCA. The rate constant was observed to be generally independent of VC concentration, but with a slight increase at lower concentrations. A degradation mechanism was proposed that described reactions between target contaminants and reactive species such as the sulfite radical and hydrated electron that were produced in the photolysis of sulfite solution. A mechanistic model that described major reactions in the ARP system was developed and explained the dependence of the rate constant on those experimental factors. Chloride ion and chloroethane were detected as the major degradation products at acid and neutral pH. An increase in pH promoted the extent of dechlorination with complete dechlorination being observed at pH 11 for both VC and 1,2-DCA. Due to the rapid degradation kinetics in these ARPs, this new treatment technology may be applied to remove various contaminants in water and wastewater.
|
2 |
Catalytic and Photocatalytic Removal of Contaminants of Emerging Concerns (CECs) and Per-/Polyfluoroalkyl Substances (PFAS) from Wastewater Effluents for Water Reuse ApplicationsAbdelraheem, Wael H.M. January 2020 (has links)
No description available.
|
3 |
Advanced Reduction Processes - A New Class of Treatment ProcessesVellanki, Bhanu Prakash 2012 August 1900 (has links)
A new class of treatment processes called Advanced Reduction Processes (ARP) has been proposed. The ARPs combine activation methods and reducing agents to form highly reactive reducing radicals that degrade oxidized contaminants.
Batch screening experiments were conducted to identify effective ARP by applying several combinations of activation methods (ultraviolet light, ultrasound, electron beam, microwaves) and reducing agents (dithionite, sulfite, ferrous iron, sulfide) to degradation of five target contaminants (perchlorate, nitrate, perfluorooctanoic acid, 2,4 dichlorophenol, 1,2 dichloroethane) at 3 pH levels (2.4, 7.0, 11.2). These experiments identified the combination of sulfite activated by ultraviolet light produced by a low pressure mercury vapor lamp as an effective ARP.
More detailed kinetic experiments were conducted with nitrate and perchlorate as target compounds and nitrate was found to degrade more rapidly than perchlorate. The effects of pH, sulfite concentration, and light intensity on perchlorate and nitrate degradation were investigated. The effectiveness of the sulfite/UV-L treatment process improved with increasing pH for both perchlorate and nitrate.
|
Page generated in 0.0703 seconds