The existing air transportation system is approaching a bottleneck because its dominant huband- spoke model results in a concentration of a large percentage of the air traffic at a few hub airports. Advanced technologies are greatly needed to enhance the transportation capabilities of the small airports in the U.S.A., and distribute the high volume of air traffic at the hub airports to those small airports, which are mostly non-controlled airports. Currently, two major focus areas of research are being pursued to achieve this objective. One focus concentrates on the development of tools to improve operations in the current Air Traffic Management system. A more long-term research effort focuses on the development of decentralized Air Traffic Management techniques. This dissertation takes the latter approach and seeks to analyze the degree of decentralization for scheduling aircraft landings in the dynamic operational environment at single runway noncontrolled airports. Moreover, it explores the feasibility and capability of scheduling aircraft landings within uninterrupted free-flight environment in which there is no existence of Air Traffic Control (ATC). First, it addresses the approach of developing static optimization algorithms for scheduling aircraft landings and, thus, analyzes the capability of automated aircraft landing scheduling at single runway non-controlled airports. Then, it provides detailed description of the implementation of a distributed Air Traffic Management (ATM) system that achieves decentralized aircraft landing scheduling with acceptable performance whereas a solution to the distributed coordination issues is presented. Finally real-time Monte Carlo flight simulations of multi-aircraft landing scenarios are conducted to evaluate the static and dynamic performance of the aircraft landing scheduling algorithms and operation concepts introduced. Results presented in the dissertation demonstrate that decentralized aircraft landing scheduling at single runway non-controlled airports can be achieved. It is shown from the flight simulations that reasonable performance of decentralized aircraft landing scheduling is achieved with successful integration of publisher/subscriber communication scheme and aircraft landing scheduling model. The extension from the non-controlled airport application to controlled airport case is expected with suitable amendment, where the reliance on centralized air traffic management can be reduced gradually in favor of a decentralized management to provide more airspace capacity, flight flexibility, and increase operation robustness.

Thesis (M.S.)--Brigham Young University. Dept. of Mechanical Engineering, 2007. / Includes bibliographical references (p. 93-96).

This study is concerned with determining the feasibility of introducing a reduced takeoff and landing (RTOL) aircraft into the national aviation system. In considering this problem, a multiple criteria decision model based on the responses of airline executives was developed to describe the RTOL utilization problem. The exact problem that is considered in this thesis is, for a given set of itineraries, determine the itineraries for which aircraft (RTOL or CTOL, conventional takeoff and landing) are to be assigned such that the amount of fuel used, delay and noise levels are to be minimized. These assignments are subject to aircraft, airport, system and budgetary constraints. A decision-making procedure was formulated to solve the decision problem utilizing an interactive, multicriteria programming procedure. This procedure was developed to consider the use of 0-l decision variables. Two example problems are presented. The air transportation systems considered in the examples include (a) six airports in New York State and (b) five major airport hub areas in the north-eastern section of the United States. / Master of Science

No description available.

Thesis (MScEng)-- Stellenbosch University, 2012. / ENGLISH ABSTRACT: This thesis presents the analysis, design, simulation and practical implementation of a control system to achieve an accurate autonomous landing of a fixed-wing unmanned aerial vehicle in the presence of wind gust atmospheric disturbances. Controllers which incorporate the concept of direct-lift control were designed based on a study of the longitudinal dynamics of the UAV constructed as a testbed. Direct-lift control offers the prospect of an improvement in the precision with which aircraft height and vertical velocity can be controlled by utilising actuators which generate lift directly, instead of the conventional method whereby the moment produced by an actuator results in lift being indirectly generated. Two normal specific acceleration controllers were designed. The first being a conventional moment-based controller, and the second a direct-lift-augmented controller. The moment-based controller makes use of the aircraft’s elevator while the direct-lift augmented controller in addition makes use of the flaps of the aircraft which serve as the direct-lift actuator. Controllers were also designed to regulate the airspeed, altitude, climb rate, and roll angle of the aircraft as well as damp the Dutch roll mode. A guidance controller was implemented to allow for the following of waypoints. A landing procedure and methodology was developed which includes the circuit and landing approach paths and the concept of a glide path offset to calibrate the touchdown point of a landing. All controllers and the landing procedure were tested in a hardware-in-the-loop simulation environment as well as practically in a series of flight tests. Five fully autonomous landings were performed, three of these using the conventional NSA controller, and the final two the direct-lift-augmented NSA controller. The results obtained during the landing flight tests show that the project goal of a landing within five meters along the runway and three meters across the runway was achieved in both normal wind conditions as well as in conditions where wind gusts prevailed. The flight tests also showed that the direct-lift-augmented NSA controller appears to achieve a more accurate landing than the conventional NSA controller, especially in the presence of greater wind disturbances. The direct-lift augmented NSA controller also exhibited less pitch angle rotation during landing. / AFRIKAANSE OPSOMMING: Hierdie tesis verteenwoordig die analise, ontwerp, simulasie en praktiese implementering van ’n beheerstelsel wat ten doel het om ’n akkurate en outonome landing van ’n onbemande vastevlerk vliegtuig in rukwind atmosferiese toestande te bewerkstellig. Gegrond op ’n studie van die longitudinale dinamika van die vliegtuig wat as proeftuig gebruik is, is beheerders ontwerp wat die beginsel van direkte-lig insluit. Direkte-lig beheer hou die potensiaal in om die vliegtuig se hoogte en vertikale snelheid akkuraat te beheer deur gebruik te maak van aktueerders wat lig direk genereer in teenstelling met die konvensionele metode waar die moment van die aktueerder indirek lig genereer. Twee normaal-versnellings beheerders is ontwerp. Die eerste is ’n konvensionele moment-gebaseerde beheerder wat gebruik maak van die hys-aktueerder van die vliegtuig, en die tweede is ’n direkte-lig-bygestaande beheerder wat addisioneel gebruik maak van die flappe van die vliegtuig wat as die direkte-lig aktueerder dien. Vedere beheerders is ontwerp wat die lugspoed, hoogte, klimkoers, en rolhoek van die vliegtuig reguleer asook die “Dutch roll” gedrag afklam. ’n Leiding-beheerder wat die volg van vliegbakens hanteer, is ingestel. Die landingsprosedure en -metodologie is ontwikkel wat die landingspad sowel as die sweef-pad bepaal en wat terselfdertyd ’n metode daarstel om die posisie van die landingspunt te kalibreer. Die beheerders en landingsprosedure is in ’n hardeware-in-die-lus omgewing gesimuleer en deur middel van ’n reeks proefvlugte getoets. Vyf ten volle outonome landings is uitgevoer waarvan drie van die konvensionele normaal-versnellings beheerder gebruik gemaak het, en die laaste twee die direkte-lig-bygestaande normaal-versnellings beheerder. Die vlugtoetsuitslae bevestig dat die navorsingsdoel om ’n landing binne vyf meter in lyn met en drie meter dwarsoor die landingstrook te bewerkstellig, behaal is. Hierdie akkuraatheid is verkry in beide goeie atmosferiese toestande sowel as toestande met rukwinde. Volgens die vlugtoetse blyk dit dat die direkte-lig-bygestaande normaalversnellings beheerder ’n meer akkurate landing kan bewerkstellig as die konvensionele normaal-versnellings beheerder, veral dan in toestande met rukwinde. Die direkte-ligbygestaande normaal-versnellings beheerder het ook ’n laer hei-hoek rotasie tydens die landing vertoon.

Thesis (MScEng (Electrical and Electronic Engineering))--University of Stellenbosch, 2010. / ENGLISH ABSTRACT: This thesis presents the development and implementation of a position based kinematic guidance system, the derivation and testing of a Dynamic Pursuit Navigation algorithm and a thorough analysis of an aircraft’s runway interactions, which is used to implement automated take-off of a fixed wing UAV. The analysis of the runway is focussed on the aircraft’s lateral modes. Undercarriage and aerodynamic effects are first analysed individually, after which the combined system is analysed. The various types of feedback control are investigated and the best solution suggested. Supporting controllers are designed and combined to successfully implement autonomous take-off, with acceleration based guidance. A computationally efficient position based kinematic guidance architecture is designed and implemented that allows a large percentage of the flight envelope to be utilised. An airspeed controller that allows for aggressive flight is designed and implemented by applying Feedback Linearisation techniques. A Dynamic Pursuit Navigation algorithm is derived that allows following of a moving ground based object at a constant distance (radius). This algorithm is implemented and verified through non-linear simulation. / AFRIKAANSE OPSOMMING: Hierdie tesis handel oor die ontwikkeling en toepassing van posisie-afhanklike, kinematiese leidings-algoritmes, die ontwikkeling van ’n Dinamiese Volgings-navigasie-algoritme en ’n deeglike analise van die interaksie van ’n lugraam met ’n aanloopbaan sodat outonome opstygprosedure van ’n vastevlerk vliegtuig bewerkstellig kan word. Die bogenoemde analise het gefokus op die laterale modus van ’n vastevlerk vliegtuig en is tweeledig behartig. Die eerste gedeelte het gefokus op die analise van die onderstel, terwyl die lugraam en die aerodinamiese effekte in die tweede gedeelte ondersoek is. Verskillende tipes terugvoerbeheer vir die outonome opstygprosedure is ondersoek om die mees geskikte tegniek te bepaal. Addisionele beheerders, wat deur die versnellingsbeheer gebaseerde opstygprosedure benodig word, is ontwerp. ’n Posisie gebaseerde kinematiese leidingsbeheerstruktuur om ’n groot persentasie van die vlugvermoë te benut, is ontwikkel. Terugvoer linearisering is toegepas om ’n lugspoedbeheerder , wat in staat is tot aggressiewe vlug, te ontwerp. ’n Dinamiese Volgingsnavigasie-algoritme wat in staat is om ’n bewegende grondvoorwerp te volg, is ontwikkel. Hierdie algoritme is geïmplementeer en bevestig deur nie-lineêre simulasie.

This thesis addresses the challenges in the efficient and robust generation and optimization of three-dimensional landing trajectories for fixed-wing aircraft subject to prescribed boundary conditions and constraints on maneuverability and collision avoidance. In particular, this thesis focuses on the airliner emergency landing scenario and the minimization of landing time. The main contribution of the thesis is two-fold. First, it provides a hierarchical scheme for integrating the complementary strength of a variety of methods in path planning and trajectory optimization for the improvement in efficiency and robustness of the overall landing trajectory optimization algorithm. The second contribution is the development of new techniques and results in mesh refinement for numerical optimal control, optimal path tracking, and smooth path generation, which are all integrated in a hierarchical scheme and applied to the landing trajectory optimization problem. A density function based grid generation method is developed for the mesh refinement process during numerical optimal control. A numerical algorithm is developed based on this technique for solving general optimal control problems, and is used for optimizing aircraft landing trajectories. A path smoothing technique is proposed for recovering feasibility of the path and improving the tracking performance by modifying the path geometry. The optimal aircraft path tracking problem is studied and analytical results are presented for both the minimum-time, and minimum-energy tracking with fixed time of arrival. The path smoothing and optimal path tracking methods work together with the geometric path planner to provide a set of feasible initial guess to the numerical optimal control algorithm. The trajectory optimization algorithm in this thesis was tested by simulation experiments using flight data from two previous airliner accidents under emergency landing scenarios.The real-time application of the landing trajectory optimization algorithm as part of the aircraft on-board automation avionics system has the potential to provide effective guidelines to the pilots for improving the fuel consumption during normal landing process, and help enhancing flight safety under emergency landing scenarios. The proposed algorithms can also help design optimal take-off and landing trajectories and procedures for airports.

The master‘s thesis is focused to design and to calculation of tailwheel-type landing gear for ultralight aircraft JA-400 according to rules UL 2 part I. – ULL and LTF UL. In the first part is search about aiplanes with three types of landing gear. Then there is rule comparison, with result what rule will the calculation meet. Then the concept and design of landing gear is proved. In the end the improve of lift option is mentioned.

No description available.

No description available.