Syfte: Syftet med det här examenarbete är att undersöka behovet av snabbkopplingsadaptrar för protesbrukare.   Bakgrund: Snabbkopplingsadapter är en förhållandevis ny produkt som både Otto Bock och Lindhe Xtend erbjuder, men ingen forskning på behovsområdet finns ännu gjord. Fördelen med produkten är enligt leverantörernas hemsidor bl a att man med den enkelt kan byta mellan olika proteskomponenter utan att behöva skruva på några protesinställningar eller byta hylsa.   Metod: För att undersöka behovet av snabbkopplingsadaptrar utfördes semistrukturella intervjuer av fenomenologisk karaktär. En serie med sju frågor sammanställdes som intervjuunderlag, vilka togs fram utifrån de tre behovsfokusområdena: Funktion, delaktighet och livskvalité. I undersökningen ingick n=6 deltagare, varav n=3 transtibialt amputerade och n=3 transfemoralt amputerade. Insamlade data analyserades vidare för framtagning av olika teman och resultat.   Resultat: Utifrån intervjuunderlaget togs följande teman fram: Byte av protesfötter/protesknäleder, På- och avtagning av byxor, Hylspassform, Transport samt Biomekanik. Varje tema utgjorde ett eget potentiellt användningsområde, där de största behoven visade sig ligga inom temana Byte av protesfötter/protesknäleder, Hylspassform samt Transport.   Slutsats: Behovet av snabbkopplingsadaptrar är högst subjektivt, och beror snarare på deltagarens liv än några allmänna faktorer. Däremot upptäcktes ett antal tänkbara användningsområden för den. / Aim: The aim of this thesis was to investigate the necessity of the quick change adapter for lower limb amputees.   Background: Quick Change Adapter is a relatively new product that both Otto Bock and Lindhe Xtend offers, but no research has been done on the area of its necessity yet.  According to the supplier´s websites the benefits of the product is that you with it easily can change prosthetic components without affecting the alignments or change socket.   Method: To investigate the necessity of the Quick Change Adapter, semi structural interviews of phenomenological characteristic were used.  A series of seven questions were compiled as a basis for the interview from the three focus areas: Function, participation and quality of Life. The thesis involved n=6 participants, of who n=3 was trantibial amputated and n=3 transfemoral amputated. Collected data was later analysed to find general themes and results.   Results: From the interviews these themes were exposed: Changing prosthetic feet/prosthetic knee joints, Donn and doff of pants, Socket fit, Transport and Biomechanics. Each theme presented a potential application area where the biggest needs seemed to be in Changing prosthetic feet/prosthetic knee joints, Socket fit and Transport.   Conclusions: The necessity of the Quick Change Adapter turned out to be very subjective, and depended more on the participant´s life then any general factors. Still there were some potential application areas detected for it.

No description available.

No description available.

Specific rehabilitation is a key period for a lower-limb amputee patient. While learning how to walk with a prosthesis, the patient needs to avoid any gait compensations that may lead to future comorbidities. To reach a gait pattern close to the one of a healthy person, objective data may be of great help to complement the experience of the clinician team. By using 6 IMUs located on the feet, shanks and thighs accompanied by 3 accelerometers on the pelvis, sternum and head, data could be recorded during walking exercises of 7 rehabilitation sessions of a patient. To compute the absolute symmetry index of the stance phase duration and the stride duration all over the instrumented sessions, the gait events defining the transitions between gait phases were determined thanks to several algorithms. By first comparing the error obtained in the calculation of the stance phase duration with all tested algorithms as compared to the data from pressure insoles considered as a reference system, the algorithm developed by Trojaniello and collaborators [1] was found to be the most adapted to this situation. Using this algorithm on the data from all sessions highlighted the possibility to detect changes in the symmetry of stance phase duration and stride duration, that are relative to the gait quality. This means that IMUs seem to be able to monitor the progress of a patient during his rehabilitation. Hence, IMUs have proven themselves to be a system of great interest in the analysis of the gait pattern of a lower-limb amputee patient in rehabilitation, by allowing for an embedded measurement of much more parameters than the pressure insoles, whose calibration constituted a real limitation.

It is estimated that approximately 10-12% of the adult population suffers from osteoarthritis (OA), with long reaching burdens personally and socioeconomically. OA also causes mild discomfort to severe pain in those suffering from the disease. The incidence rate of OA for individuals with transtibial amputations is much than average in the tibiofemoral joint (TF). It is well understood that abnormal articular cartilage stress, whether that be magnitude or location, increases the risk of developing OA. Finite element (FE) simulations can predict stress in the TF joint, many studies throughout the years have validated the technology used for this purpose. This thesis is the first to successfully validate a procedure for creating subject-specific FE models for transtibial amputees to simulate the TF joint in gait, cycling and elliptical exercises. Maximum tibial cartilage pressure was extracted post-simulation and compared to historical data. The body weight normalized contact pressure on the tibial articular cartilage for the two amputee participants was larger in magnitude than the control participant in all but the medial compartment in cycling. Additionally, cycling exercise produced the smallest values of contact pressure with elliptical and gait producing similar max values but different areas of effect. The results from this thesis align with the body of work preceding it and further the goal of a FE model that predicts in-vivo articular cartilage stress in the TF joint. Future studies can further refine this methodology and create additional subject-specific models to allow for a statistical analysis of the observed differences to find if the results are significantly different. Refining the methodology could include investigating the full effect of the damping factor on contact pressure and exploring alternative methods of mesh generation.

yes / Background Walking down slopes and/or over uneven terrain is problematic for unilateral trans-tibial amputees. Accordingly, ‘ankle’ devices have been added to some dynamic-response feet. This study determined whether use of a microprocessor controlled passive-articulating hydraulic ankle–foot device improved the gait biomechanics of ramp descent in comparison to conventional ankle–foot mechanisms. Methods Nine active unilateral trans-tibial amputees repeatedly walked down a 5° ramp, using a hydraulic ankle–foot with microprocessor active or inactive or using a comparable foot with rubber ball-joint (elastic) ‘ankle’ device. When inactive the hydraulic unit's resistances were those deemed to be optimum for level-ground walking, and when active, the plantar- and dorsi-flexion resistances switched to a ramp-descent mode. Residual limb kinematics, joints moments/powers and prosthetic foot power absorption/return were compared across ankle types using ANOVA. Findings Foot-flat was attained fastest with the elastic foot and second fastest with the active hydraulic foot (P < 0.001). Prosthetic shank single-support mean rotation velocity (p = 0.006), and the flexion (P < 0.001) and negative work done at the residual knee (P = 0.08) were reduced, and negative work done by the ankle–foot increased (P < 0.001) when using the active hydraulic compared to the other two ankle types. Interpretation The greater negative ‘ankle’ work done when using the active hydraulic compared to other two ankle types, explains why there was a corresponding reduction in flexion and negative work at the residual knee. These findings suggest that use of a microprocessor controlled hydraulic foot will reduce the biomechanical compensations used to walk down slopes.

Yes / If a prosthetic foot creates resistance to forwards shank rotation as it deforms during loading, it will exert a braking effect on centre of mass progression. The present study determines whether the centre of mass braking effect exerted by an amputee's habitual rigid ‘ankle’ foot was reduced when they switched to using an ‘Echelon’ hydraulic ankle–foot device. Nineteen lower limb amputees (eight trans-femoral, eleven trans-tibial) walked overground using their habitual dynamic-response foot with rigid ‘ankle’ or ‘Echelon’ hydraulic ankle–foot device. Analysis determined changes in how the centre of mass was transferred onto and above the prosthetic-foot, freely chosen walking speed, and spatio-temporal parameters of gait. When using the hydraulic device both groups had a smoother/more rapid progression of the centre of pressure beneath the prosthetic hindfoot (p ≤ 0.001), and a smaller reduction in centre of mass velocity during prosthetic-stance (p < 0.001). As a result freely chosen walking speed was higher in both groups when using the device (p ≤ 0.005). In both groups stance and swing times and cadence were unaffected by foot condition whereas step length tended (p < 0.07) to increase bilaterally when using the hydraulic device. Effect size differences between foot types were comparable across groups. Use of a hydraulic ankle–foot device reduced the foot's braking effect for both amputee groups. Findings suggest that attenuation of the braking effect from the foot in early stance may be more important to prosthetic-foot function than its ability to return energy in late stance.

yes / Background: Minimum toe clearance is a critical gait event because it coincides with peak forward velocity of the swing foot, and thus, there is an increased risk of tripping and falling. Trans-tibial amputees have increased risk of tripping compared to able-bodied individuals. Assessment of toe clearance during gait is thus clinically relevant. In able-bodied gait, minimum toe clearance increases with faster walking speeds, and it is widely reported that there is synchronicity between when peak swing-foot velocity and minimum toe clearance occur. There are no such studies involving lower-limb amputees. Objectives: To determine the effects of walking speed on minimum toe clearance and on the temporal relationship between clearance and peak swing-foot velocity in unilateral trans-tibial amputees. Study design: Cross-sectional. Methods: A total of 10 trans-tibial participants walked at slow, customary and fast speeds. Minimum toe clearance and the timings of minimum toe clearance and peak swing-foot velocity were determined and compared between intact and prosthetic sides. Results: Minimum toe clearance was reduced on the prosthetic side and, unlike on the intact side, did not increase with walking speed increase. Peak swing-foot velocity consistently occurred (~0.014 s) after point of minimum toe clearance on both limbs across all walking speeds, but there was no significant difference in the toe–ground clearance between the two events. Conclusion: The absence of speed related increases in minimum toe clearance on the prosthetic side suggests that speed related modulation of toe clearance for an intact limb typically occurs at the swing-limb ankle. The temporal consistency between peak foot velocity and minimum toe clearance on each limb suggests that swing-phase inter-segmental coordination is unaffected by trans-tibial amputation. Clinical relevance The lack of increase in minimum toe clearance on the prosthetic side at higher walking speeds may potentially increase risk of tripping. Findings indicate that determining the instant of peak swing-foot velocity will also consistently identify when/where minimum toe clearance occurs.

Millions of individuals around the globe are impacted by osteoarthritis, which is the prevailing type of arthritis. This condition arises as a result of gradual deterioration of the protective cartilage that safeguards the ends of the bones. This is especially true of transtibial amputees, who have a significantly higher incidence of osteoarthritis of the knee in their intact limb than non-amputees. Engaging in regular physical activity, managing weight effectively, and undergoing specific treatments can potentially slow down the advancement of the disease and enhance pain relief and joint function. Nevertheless, the relationship between the type of exercise and its impact on cartilage stress remains uncertain. In order to address this question, tibiofemoral finite element analysis (FEA) models were developed. The models incorporated more realistic material properties for cartilage, hexahedral elements, and non-linear springs for ligaments. To ensure their accuracy, the models were validated against experimental data obtained from cadaveric studies. The contact loads and flexion angles of two individuals with amputations and one individual without amputation, which were obtained in a previous study conducted at Cal Poly, were implemented in the FEA models for gait, cycling, and elliptical exercises. The FEA models were used to extract the maximum stress values experienced in the tibial contact areas, specifically in the medial and lateral compartments of the knee. In cycling, the normalized contact pressure on the tibial articular cartilage, relative to body weight, was generally higher for the two participants with amputations compared to the control participant, except for the medial compartment. Furthermore, when comparing different exercises, cycling resulted in the lowest contact pressure values, with elliptical and walking exercises producing similar maximum values. The findings indicated that individuals with amputations are at a greater risk of developing OA, regardless of the type of exercise performed. However, among the different exercises studied, cycling was found to exert the lowest levels of compression stress on the tibial cartilage.

The aim of this thesis was to determine the biomechanical adaptations made by active unilateral trans-tibial amputees when they used a prosthesis incorporating a hydraulically-damped, articulating ankle-foot device compared to non-hydraulically attached devices. Kinematic and kinetic data were recorded while participants ambulated over a flat and level surface at their customary walking speeds and at speeds they perceived to be faster and slower using the hydraulic device and their habitual foot. Use of the hydraulic device resulted in increases in self-selected walking speeds with a simultaneous reduction in intact-limb work per meter travelled. Use of the device also attenuated inappropriate fluctuations in the centre-of-pressure trajectory beneath the prosthetic foot and facilitated increased residual-knee loading-response flexion and prosthetic-limb load bearing during stance. These changes occurred despite the hydraulic device absorbing more, and returning less, energy than the participants’ habitual ankle-foot devices. The changes were present across all walking speeds but were greatest at customary walking speeds. The findings suggest that a hydraulic ankle-foot device has mechanical benefits, during overground gait, for active unilateral trans-tibial amputees compared to other attachment methods. The findings also highlight that prosthetic ankle-foot device ‘performance’ can be evaluated using surrogate measures and without modelling an ‘ankle joint’ on the prosthetic limb.