Thesis (MScEng (Electrical and Electronic Engineering))--University of Stellenbosch, 2010. / ENGLISH ABSTRACT: Telephony has developed substantially over the years, but the fundamental auditory model of mixing all the audio from di erent sources together into a single monaural stream has not changed since the telephone was rst invented. Monaural audio is very di cult to follow in a multiple-source situation such as a conference call. Sound originating from a speci c point in space will travel along a slightly di erent path to each ear. Although we are not consciously aware of it, our brain processes these spatial cues to help us to locate sounds in space. It is this spatial information that allows us to focus our attention and listen to a single speaker in an environment where many di erent sources may be active at the same time; a phenomenon known as the \cocktail party e ect". It is possible to reproduce these spatial cues in a sound recording, using Head-Related Transfer Functions (HRTFs) to allow a listener to experience localised audio, even when sound is reproduced through a headset. In this thesis, spatial audio is implemented in a telephony application as well as in a virtual world. Experiments were conducted which demonstrated that spatial audio increases the intelligibility of speech in a multiple-source environment and aids active speaker identi cation. Resource usage measurements show that these bene ts are, however, not without a cost. In conclusion, spatial audio was shown to be an improvement over the monaural audio model traditionally implemented in telephony. / AFRIKAANSE OPSOMMING: Telefonie het ansienlik ontwikkel oor die jare, maar die basiese ouditiewe model waarin die klank van alle verskillende bronne bymekaar gemeng word na een enkelouditoriese stroom het nie verander sedert die eerste telefoon gebou is nie. Enkelouditoriese klank is baie moeilik om te volg in 'n meervoudigebron situasie, soos byvoorbeeld in 'n konferensie oproep. Klank met oorsprong by 'n sekere punt in die ruimte sal 'n e ens anderse pad na elke oor volg. Selfs is ons nie aktief bewus hiervan nie, verwerk ons brein hierdie ruimtelike aanduidinge om ons te help om klanke in die ruimte te vind. Dit is hierdie ruimtelike inligting wat ons toelaat om ons aandag te vestig en te luister na 'n enkele spreker in 'n omgewing waar baie verskillende bronne terselfdertyd aktief mag wees, 'n verskynsel wat bekend staan as die \skemerkelkiepartytjiee ek". Dit is moontlik om hierdie ruimtelike leidrade na 'n klank te reproduseer met behulp van hoofverwandeoordragfunksies (HRTFs) en om daardeur 'n luisteraar gelokaliseerde klank te laat ervaar, selfs wanneer die klank deur middel van oorfone gespeel word. In hierdie tesis word ruimtelike klank ge mplementeer in 'n telefonieprogram, sowel as in 'n virtuelew^ereld. Eksperimente is uitgevoer wat getoon het dat ruimtelike klank die verstaanbaarheid van spraak in 'n meerderebronomgewing verhoog en help met aktiewe spreker identi kasie. Hulpbrongebruiks metings toon aan dat hierdie voordele egter nie sonder 'n koste kom nie. Ter afsluiting, dit is bewys dat ruimtelike klank 'n verbetering tewees gebring het oor die enkelouditorieseklankmodel wat tradisioneel in telefonie gebruik het.

Thesis (MScEng (Electrical and Electronic Engineering))--University of Stellenbosch, 2010. / ENGLISH ABSTRACT: This thesis presents an attempt at creating a fully functional SQUID for the purposes of a predefined application. The goal of the work is to provide a method of development, primarily utilising the facilities of the Engineering Faculty of the University of Stellenbosch, with minimal assistance from other departments. This method is then analysed and the successes and failures discussed in order to provide guidelines and recommendations for future research. The device consists of a gradiometric SQUID, as well as electronics which provide the SQUID bias current, output linearisation and output signal filtering. YBCO is used for the superconducting material, allowing the use of liquid nitrogen as coolant which eases the operation and portability of the device. Various methods of creating Josephson junctions are tested, such as constriction bridges using AFM lithography and step-edge junctions, with and without different buffer layers. Proof of concept simulations demonstrate the viability of the device. Unfortunately, a functional device could not be constructed, mostly due to the design requiring higher levels of resolution and process control than some of the available facilities can provide. Recommendations are provided for future researchers. / AFRIKAANSE OPSOMMING: Hierdie tesis beskryf ’n poging om ’n volledige funksionele SQUID te vervaardig vir die doeleindes van ’n vasgestelde toepassing. Die doel van die werk is om ’n metode te voorsien wat hoofsaaklik gebruik maak van die fasiliteite van die Ingenieurswese Fakulteit van die Universiteit van Stellenbosch, met minimale hulp van ander departemente. Hierdie metode word dan ondersoek en die suksesse en mislukkings bespreek om riglyne en voorstellings te voorsien vir toekomstige navorsing. Die toestel bestaan uit ’n gradiometriese SQUID, sowel as elektronika wat voorsiening maak vir voorspanning, uittree-linearisering en ’n uittree-filter. YBCO is as supergeleidende materiaal gebruik, wat die gebruik van vloeibare stikstof as verkoeler moontlik maak en dus die hantering en draagbaarheid van die toestel vergemaklik. Verskillende metodes om Josephson-vlakke te vervaardig is getoets, onder andere vernouingsbrugvlakke deur middel van AFM litografie en stapvlakke met en sonder bufferlae. Bewys van konsep simulasies demonstreer die lewensvatbaarheid van die toestel. Ongelukkig kon ’n funksionele weergawe van die toestel nie vervaardig word nie, hoofsaaklik as gevolg van die ontwerp wat hoër resolusievlakke en beter prosesbeheer benodig as wat sekere van die beskikbare fasiliteite kan voorsien. Aanbevelings word voorsien vir toekomstige navorsers.

Thesis (MEng (Electrical and Electronic Engineering))--University of Stellenbosch, 1995. / 189 leaves single sided printed, preliminary pages and numbered pages 1-126. Includes bibliography, list of appendixes, figures, notation and symbols. Digitized at 300 dpi (OCR), using a Bizhub 250 Scanner. / ENGLISH ABSTRACT: The Sunsat microsatellite is being developed at the University of Stellenbosch. It is equipped with a high resolution earth imager which requires a sophisticated attitude determination and control system. Precise control of the satellite is impossible without high precision attitude sensors. The most accurate attitude sensor presently used by satellites is the star sensor. The aim 'of this thesis is to develop a low cost, high precision star sensor for the Sunsat microsatellite. The development included the selection of electronic and optical hardware followed by the design, construction and testing of the sensor. Software algorithms were developed and programmed to control the imager, extract stars from images and match the observed constellations to a star catalogue. A set of matching observed and reference vectors are passed to the attitude determination and control system which calculates the three axis orientation of the satellite. / AFRIKAANSE OPSOMMING: Die Sunsat mikrosatelliet word tans by die Universiteit van Stellenbosch ontwikkel. Dit is toegerus met 'n hoeresolusie aardwaarnemingskamera en vereis 'n gevorderde orientasiebepaling-en beheerstelsel. Presiese beheer is onmoontlik sonder akkurate sensore. 'n Stersensor is die mees akkurate tipe sensor waarmee satelliete tans toegerus word. Die doelwit van hierdie tesis is die ontwikkeling van 'n hoe resolusie, laekoste stersensor vir die Sunsat mikrosatelliet. Die ontwikkeling behels die seleksie van elektroniese en optiese apparatuur wat gevolg is deur die ontwerp, opbou en toets van die sensor. Programmatuur algoritrnes is ontwerp om die kamera te beheer, sterre in fotos te herken en waargenome konstellasies in die sterkatalogus te vind. 'n Stel waargenome en verwysingsvektore stel die orientasiebepaling-en beheerstelsel in staat om die orientasie van die satelliet te bereken.

Thesis (MScEng (Electrical and Electronic Engineering))--University of Stellenbosch, 2010. / ENGLISH ABSTRACT: The Coal to Liquid facility, Sasol, Secunda operates as a train of processes. Disturbances and capacity restrictions can occur throughout the plant and the throughput fluctuates whenever disturbances occur. When capacity restrictions occur in a subplant and more substances enter the sub-plant than can be processed, the extra substances are flared or dumped and therefore lost. To reduce losses and extra costs and to maximise the throughput of the whole plant, supervisory control is implemented over the whole plant system. Each process in the process train is controlled with regulatory controllers and the overall process is then controlled with a supervisory controller. These two sets of controllers operate in two different layers of control, with the regulatory controllers the faster inner layer. The supervisory control is the outer layer of the two control layers. The supervisory controller takes over the work of the human operator by deciding on the changes in total throughput as well as the set points for each individual process. These set points for each process are then followed with the regulatory controllers. For the regulatory control of the system, different control methods are investigated and compared. The different control methods that are looked at are PI control, Linearised State Feedback control, Fuzzy Logic control and Model Reference Adaptive Control. After an investigation into the various control methods Fuzzy Logic control was chosen for the regulatory as well as the supervisory control levels. Fuzzy Logic control is a rule based control method. Fuzzy variables are everyday terms such as very slow or nearly full. These terms are easy to understand by the operator and multi-variable control is possible with Fuzzy Logic control without an accurate mathematical representation of the system. These facts made Fuzzy Logic control ideal for this implementation. To improve the profit of the Coal to Liquid facility the throughput was maximised. The combination of regulatory and supervisory controllers minimised losses and rejected disturbances. This resulted in a smoother output with maximum profit. / AFRIKAANSE OPSOMMING: Die Steenkool-na-Olie fasiliteit, Sasol, Secunda funksioneer as ’n trein van prosesse. Versteurings en kapasiteit beperkings kan deur die hele aanleg voorkom en die deurset wissel voortdurend wanneer versteurings voorkom. Wanneer kapasiteit beperkings voorkom in ’n aanleg en meer stowwe word in die aanleg ingestuur as wat dit kan verwerk, word die ekstra stowwe gestort en dit gaan verlore. Om verliese en kostes te verminder en om die deurset van die hele aanleg te vergroot, is oorhoofse beheer geïmplementeer oor die hele stelsel. Elke proses in die trein van chemiese prosesse word beheer met regulerende beheerders. Die totale proses word dan beheer met ’n oorhoofse beheerder. Hierdie twee tipes beheerders funksioneer in twee lae van beheer met die regulerende beheerders die vinniger binneste laag. Die oorhoofse beheerder vorm die buitenste laag van die twee beheer lae en neem die werk van die menslike operateur oor deur die veranderinge in die totale deurset, sowel as die stelpunte vir elke afsonderlike proses, te bepaal. Hierdie stelpunte vir elke proses word dan met die regulerende beheerders gevolg. Verskillende beheer metodes is ondersoek vir die regulerende beheer van die stelsel. Die verskillende beheer metodes waarna gekyk word, is PI beheer, Geliniariseerde Toestands Terugvoer beheer, Wasige Logiese beheer en Model Verwysing Aanpassende beheer. Na ’n ondersoek na die verskillende beheer metodes is Wasige Logiese beheer gekies vir die regulerende asook die oorhoofse beheer. Wasige Logiese beheer is ’n reël gebasseerde beheer metode. Wasige Logika veranderlikes is alledaagse terme soos baie stadig of byna vol. Hierdie terme is maklik om te verstaan deur die operateur. Meervoudige-veranderlike beheer is moontlik met Wasige Logiese beheer sonder ’n akkurate wiskundige voorstelling van die stelsel. Hierdie feite maak Wasige Logiese beheer ideaal vir hierdie doel. Om die wins van die Steenkool-na-Olie fasiliteit te verbeter, is die deurset gemaksimeer. Die kombinasie van regulerende- en toesighoudende beheerders beperk verliese en verwerp versteurings. Dit lei tot ’n gladder uitset en ’n maksimum wins.

Thesis (MScEng (Electrical and Electronic Engineering))--University of Stellenbosch, 2010. / ENGLISH ABSTRACT: The World Wide Web brought with it an unprecedented level of information overload. Computers are very effective at processing and clustering numerical and binary data, however, the automated conceptual clustering of natural-language data is considerably harder to automate. Most past techniques rely on simple keyword-matching techniques or probabilistic methods to measure semantic relatedness. However, these approaches do not always accurately capture conceptual relatedness as measured by humans. In this thesis we propose and evaluate the use of novel Spreading Activation (SA) techniques for computing semantic relatedness, by modelling the article hyperlink structure of Wikipedia as an associative network structure for knowledge representation. The SA technique is adapted and several problems are addressed for it to function over the Wikipedia hyperlink structure. Inter-concept and inter-document similarity metrics are developed which make use of SA to compute the conceptual similarity between two concepts and between two natural-language documents. We evaluate these approaches over two document similarity datasets and achieve results which compare favourably with the state of the art. Furthermore, document preprocessing techniques are evaluated in terms of the performance gain these techniques can have on the well-known cosine document similarity metric and the Normalised Compression Distance (NCD) metric. Results indicate that a near two-fold increase in accuracy can be achieved for NCD by applying simple preprocessing techniques. Nonetheless, the cosine similarity metric still significantly outperforms NCD. Finally, we show that using our Wikipedia-based method to augment the cosine vector space model provides superior results to either in isolation. Combining the two methods leads to an increased correlation of Pearson p = 0:72 over the Lee (2005) document similarity dataset, which matches the reported result for the state-of-the-art Explicit Semantic Analysis (ESA) technique, while requiring less than 10% of the Wikipedia database as required by ESA. As a use case for document similarity techniques, a purely content-based news-article recommender system is designed and implemented for a large online media company. This system is used to gather additional human-generated relevance ratings which we use to evaluate the performance of three state-of-the-art document similarity metrics for providing content-based document recommendations. / AFRIKAANSE OPSOMMING: Die Wêreldwye-Web het ’n vlak van inligting-oorbelading tot gevolg gehad soos nog nooit tevore. Rekenaars is baie effektief met die verwerking en groepering van numeriese en binêre data, maar die konsepsuele groepering van natuurlike-taal data is aansienlik moeiliker om te outomatiseer. Tradisioneel berus sulke algoritmes op eenvoudige sleutelwoordherkenningstegnieke of waarskynlikheidsmetodes om semantiese verwantskappe te bereken, maar hierdie benaderings modelleer nie konsepsuele verwantskappe, soos gemeet deur die mens, baie akkuraat nie. In hierdie tesis stel ons die gebruik van ’n nuwe aktiverings-verspreidingstrategie (AV) voor waarmee inter-konsep verwantskappe bereken kan word, deur die artikel skakelstruktuur van Wikipedia te modelleer as ’n assosiatiewe netwerk. Die AV tegniek word aangepas om te funksioneer oor die Wikipedia skakelstruktuur, en verskeie probleme wat hiermee gepaard gaan word aangespreek. Inter-konsep en inter-dokument verwantskapsmaatstawwe word ontwikkel wat gebruik maak van AV om die konsepsuele verwantskap tussen twee konsepte en twee natuurlike-taal dokumente te bereken. Ons evalueer hierdie benadering oor twee dokument-verwantskap datastelle en die resultate vergelyk goed met die van ander toonaangewende metodes. Verder word teks-voorverwerkingstegnieke ondersoek in terme van die moontlike verbetering wat dit tot gevolg kan hê op die werksverrigting van die bekende kosinus vektorruimtemaatstaf en die genormaliseerde kompressie-afstandmaatstaf (GKA). Resultate dui daarop dat GKA se akkuraatheid byna verdubbel kan word deur gebruik te maak van eenvoudige voorverwerkingstegnieke, maar dat die kosinus vektorruimtemaatstaf steeds aansienlike beter resultate lewer. Laastens wys ons dat die Wikipedia-gebasseerde metode gebruik kan word om die vektorruimtemaatstaf aan te vul tot ’n gekombineerde maatstaf wat beter resultate lewer as enige van die twee metodes afsonderlik. Deur die twee metodes te kombineer lei tot ’n verhoogde korrelasie van Pearson p = 0:72 oor die Lee dokument-verwantskap datastel. Dit is gelyk aan die gerapporteerde resultaat vir Explicit Semantic Analysis (ESA), die huidige beste Wikipedia-gebasseerde tegniek. Ons benadering benodig egter minder as 10% van die Wikipedia databasis wat benodig word vir ESA. As ’n toetstoepassing vir dokument-verwantskaptegnieke ontwerp en implementeer ons ’n stelsel vir ’n aanlyn media-maatskappy wat nuusartikels aanbeveel vir gebruikers, slegs op grond van die artikels se inhoud. Joernaliste wat die stelsel gebruik ken ’n punt toe aan elke aanbeveling en ons gebruik hierdie data om die akkuraatheid van drie toonaangewende maatstawwe vir dokument-verwantskap te evalueer in die konteks van inhoud-gebasseerde nuus-artikel aanbevelings.

Recent advances in fiber optics technology have enabled extremely high-speed transport of different forms of data, on multiple wavelengths of an optical fiber, using Dense Wavelength Division Multiplexing (DWDM). It has now become possible to deploy high-speed, multi-service networks using DWDM technology. As the amount of traffic carried has increased, any single failure can be catastrophic. Survivability becomes indispensable in such networks. Therefore, it is imperative to design networks that can quickly and efficiently recover from failures. Most research to date in survivable optical network design and operation focuses on single link failures, however, the occurrence of multiple-link failures are not uncommon in networks today. Multi-link failure scenarios can arise out of two common situations. First, an arbitrary link may fail in the network, and before that link can be repaired, another link fails, thus creating a multi-link failure sequence. Secondly, it might happen in practice that two distinct physical links may be routed via the same common duct or physical channel. A failure at that shared physical location creates a logical multiple-link failure. In this dissertation, we conduct an intensive study of mechanisms for achieving survivability in optical networks. From the many mechanisms presented in the literature the focus of this work was on protection as a mechanism of survivability. In particular four protection schemes were simulated and their results analyzed to ascertain which protection scheme achieves the best survivability in terms of number of wavelengths recovered for a specific failure scenario. A model network was chosen and the protection schemes were evaluated for both single and multiple link and node failures. As an indicator of the performance of these protection schemes over a period of time average service availability and average loss in traffic for each protection scheme was also simulated. Further simulations were conducted to observe the percentage link and node utilization of each scheme hence allowing us to determine the strain each protection scheme places on network resources when traffic in the network increases. Finally based on these simulation results, recommendations of which protection scheme and under what failure conditions they should be used are made. / Recent advances in fiber optics technology have enabled extremely high-speed transport / Thesis (M.Sc.)-University of KwaZulu-Natal, 2006. / Thesis (M.Sc.Eng.)-University of KwaZulu-Natal, 2006.

Dissertation (PhD)--University of Stellenbosch, 2002. / ENGLISH ABSTRACT: Though not so prominent as the wide band, high speed, mainstream development of data communication networks, cost and particular bandwidth limitations, still ensure extensive and continuing use of low-speed, half-duplex data link equipment. Most of these applications are radio based and aimed towards telemetry systems serving a wide range of utilities. Experience has shown that systems engineering for this type of installation, is seldom undertaken to a satisfactory analytical level. Investigation of published analyses of CSMA protocols in general, has indicated scope of extension of theoretical work to include system parameters for the type of protocol investigated in this dissertation. This dissertation describes the mathematical modeling of such a strategy by utilising a significantly modified, finite source, transition state-matrix approach derived from queueing theory. The contribution of the dissertation is to include system overhead parameters, such as backoff strategy, channel noise, equipment rise times, propagation- and retry delays, into the abovementioned model. The latter provides a relatively straightforward and readily applicable method for system analysis and performance prediction. A further contribution is the presentation of a software emulation with which different strategies could be simulated, allowing for adjustment of all design parameters. The simulation is intended for parallel and confimatory use with the theoretical model. A dual set of tools, theoretical and emulation based, is thus contributed to assist with the system design, performance prediction and protocol selection process. / AFRIKAANSE OPSOMMING: Alhoewel nie so prominent soos die wyeband, hoëspoed, hoofstroom ontwikkeling van datakommunikasie netwerke nie, verseker koste en spesifieke bandwydte beperkings nog die uitgebreide en voortdurende gebruik van laespoed half-dupleks data verbindingstoerusting. Meeste van die toepassings is radio gebaseer en gerig op telemetriestelsels wat deur 'n wye verskeidenheid diensverskaffers benut word. Stelselontwerp vir hierdie tipe installasies word selde op analitiese vlak benader. Ondersoek van gepubliseerde analises van kontensieprotokolle in die algemeen, het ruimte aangetoon vir die uitbreiding van bestaande teoretiese werk om stelselveranderlikes soos van toepassing op die tipe protokol in hierdie proefskrif ondersoek, in te sluit. Hierdie proefskrif beskryf die wiskundige modelering van sodanige strategie, deur gebruik te maak van 'n beduidend veranderde eindige bron, oorgangs-toestandmatriks benadering, afgelei van touteorie. Die bydrae van hierdie proefskrif is die insluiting van oorhoofse stelselveranderlikes, soos herhaal strategie, kanaalruis, toerusting stygtye, herhaal- en voortplantingsvertragings, in bogenoemde model. Laasgenoemde verskaf 'n relatief eenvoudige en maklik toepasbare metode vir stelselanalise en werkverrigtingvoorspelling. 'n Verder bydrae is die daarstelling van 'n sagteware simulasie waarmee verskillende strategieë nageboots kan word. Verstelling van alle ontwerpparameters word ondersteun. Die simulasie is bedoel vir parallelle en bevestigende gebruik tesame met die teoretiese model. 'n Dubbele, teoreties- en simulasie gebaseerde benadering, word dus aangebied vir gebruik by stelselontwerp, gedragsvoorspelling en optimale protokolseleksie.

Thesis (MScEng)--Stellenbosch University, 2012. / ENGLISH ABSTRACT: In the wool trade the mean diameter of wool is a primary indicator of wool quality. It is currently standard practice for a wool grower to send samples to a laboratory for classification before and after shearing. The devices used to make measurements on samples are often big and bulky and sensitive to the environment, thus they are not ideally suited for on site testing. A brief discussion of the industry is given with background information on existing devices as well as information about organic fibres in general. We test an experimental device which has the potential to be robust and compact based on the Fourier optical principle. Two initial designs are considered and the transmission design is further developed into a working system. The working system is evaluated in a sample measurement experiment. In our sample measurement experimentwe determine the mean diameter of a set of samples which has been analysed by an external testing body such that the measurements could be compared. / AFRIKAANSE OPSOMMING: In diewol bedryfword die gemiddelde diameter vanwol as ’n primêre kwaliteitindeks gebruik. Dit is tans gebruiklik om wol monsters na ’n laboratorium te stuur vir klassifikasie voor en na die skape geskeer word. Die toestel wat gebruik word om die wol monsters te klassifiseer is geneig om groot, lomp en sensitief vir die omgewing te wees en is sodoende nie ideaal vir veld gebruik nie. ’n Kort uitleg van die industrie word gegee tesame met agtergrond inligting van bestaande toestelle asook agtergrond oor organiese vesels in die algemeen. Ons toets ’n eksperimentele toestel wat potensieel kompak en aanpasbaar kan wees en gebaseer is op die Fourier optiese prinsiep. Twee aanvanklike ontwerpe word oorweeg en eindelik word die transmissie ontwerp verder ontwikkel tot ’n werkende sisteem. Die sisteem word geëvalueer in ’n monster meting eksperiment. In die monster meting eksperiment bepaal ons die gemiddelde diameter van ’n stel monsters waarvan die gemiddelde diameter deur ’n eksterne liggaam bepaal is om sodoende die metings te kan vergelyk.

Thesis (MScIng)--University of Stellenbosch, 2008. / ENGLISH ABSTRACT: The Applications of Superconductors in Cellular Network Base Stations R. Du Toit Department of Electronic Engineering University of Stellenbosch Private Bag X1, 7602 Matieland, South Africa Thesis: MScEng (E&E) March 2008 Wireless communications have increasingly become part of our world. The growth of radio frequency (RF) wireless communications has led to an increasing demand for frequency spectrum licenses, increased system capacity and larger user bandwidths. These demands lead to frequent improvements on the physical and higher layers of wireless communication protocols. Changes in the physical layer are frequently followed by the need for replacement of dedicated hardware components. The need therefore exists for a more general and programmable physical layer. A more general and programmable radio architecture implies increased radio front-end performance without losing programmability. The contribution of this thesis is the analysis of how superconductor electronics (SCE) using Rapid Single Flux Quantum (RSFQ) logic may advance wireless radio front-ends by providing a general-purpose programmable radio architecture. Superconductor analogue to digital converters (ADCs) are employed as high performance, programmable digitization structures. Once a received signal is digitized, SCE can be used to rapidly do recursive operations such as synchronization and multi-path delay estimation. These operations are based on correlation, and for evaluation of such operations with SCE the popular CDMA multiplexing method is studied along with the WCDMA protocol used in the 3G UMTS standard. Two delta-type oversampling superconductor ADC modulator designs are presented and evaluated along with a hybrid decimation filter design, using both the benefits of SCE and room temperature electronics. A fast RSFQ correlator design is also presented and evaluated for use in a multi-path estimation structure. A rapid multi-path delay estimation architecture based on fast RSFQ circular data buffers and correlators is presented. The architecture uses the fast speeds of RSFQ logic to obtain accurate path delay estimates in a rapidly changing wireless environment. It is concluded that RSFQ-based wireless receiver components offer promising new options for data conversion, correlation and multi-path delay estimation implementations. / AFRIKAANSE OPSOMMING: The Applications of Superconductors in Cellular Network Base Stations R. Du Toit Department of Electronic Engineering University of Stellenbosch Private Bag X1, 7602 Matieland, South Africa Thesis: MScEng (E&E) March 2008 Draadlose kommunikasie word al hoe meer deel van ons wêreld. Groei in radiofrekwensietipe kommunikasie het gelei tot ’n toenemende aanvraag na frekwensiespektrum lisensies, vergrote stelselkapasiteit en groter gebruikerbandwydtes. Hierdie aanvrae lei tot gereelde en spoedige verbeteringe op die fisiese en hoër lae van huidige draadlose kommunikasieprotokol. Veranderinge in die fisiese laag vereis gewoonlik dat toegewyde hardewarde komponente vervang word. Die behoefte bestaan dus vir ’n meer algemene, programmeerbare fisiese laag. Dit vereis dus ’n verbetering in die radio-ontvanger se komponente naaste aan die antenna sonder om programmeerbaarheid te verloor. Die bydrae van hierdie tesis is hoofsaaklik die analise van hoe supergeleierelektronika wat van Rapid Single Flux Quantum (RSFQ) logika gebruik maak, huidige draadlose sellulêre basisstasies se fisiese laag kan verbeter deur ’n meer algemene en programmeerbare radio-argitektuur op te lewer. Supergeleier analoog-na-syfer omsetters (ADCs) word bestudeer as moontlike programmeerbare versyferingstrukture wat steeds hoë werkverrigting lewer. Wanneer ’n ontvangde sein in digitale vorm omgesit is, kan supergeleierelektronika gebruik word om vinnig rekursiewe operasies uit te voer. Voorbeelde van sulke operasies is sinkronisasie en die waardebepaling van die vertraging van verskillende paaie wat ’n sein volg na die ontvanger. Hierdie spesifieke operasies se werking is gebaseer op korrelasie, en vir die evaluasie van sulke operasies met supergeleierelektronika is die gewilde wyeband-CDMA (WCDMA) protokol wat gebruik word in die 3G UMTS-standaard. Twee supergeleier-delta-tipe oorversyferings-ADC-moduleerderontwerpe word voorgelê en evaluasie word daarop gedoen saam met ’n hibriede desimasiefilterontwerp wat gebruik maak van beide die voordele van supergeleierelektronika en kamertemperatuurelektronika. ’n Vinnige RSFQ-korreleerder word ook voorgelê en evaluasie word daarop gedoen vir gebruik binne ’n multi-padvertraging-waardebepalerstruktuur. Hierdie struktuur wat gebaseer is op RSFQ sirkulêre buffers en korreleerders, word voorgelê. Die waardebepaler maak gebruik van die spoed van RSFQ-logika om akkurate multi-padvertragingswaardes te bepaal in ’n vinnig veranderende draadlose omgewing. Die gevolgtrekking word gemaak dat RSFQ-gebaseerde draadlose ontvangerkomponente groot voordele in versyfering-, korreleerder- en multi-padvertragingsbepaler-toepassings bied.

Thesis (MScIng)--Stellenbosch University, 2008. / ENGLISH ABSTRACT: Modern communication systems demand efficient, linear power amplifiers. The amplifiers are often operated in the backed-off power levels at which linear amplifiers such as class B amplifier are particularly inefficient. The Doherty amplifier provides an improvement as it increases efficiency at backed of power levels. Doherty amplifiers consists of two amplifiers, a carrier amplifier and a peaking amplifier, of which the output is combined in a novel way. Implementation of the Doherty amplifier with transistors is not ideal. One of the main problems is the insufficient current production of the peaking amplifier at peak envelope power (PEP) if it is implemented as a class C amplifier. A suggested solution to this problem is a bias adaption system that controls the peaking amplifier gate voltage dynamically depending on the input power levels. The design and evaluation of such a adaptive Doherty amplifier is the main goal of this thesis. A classical Doherty amplifier with and an uneven Doherty amplifier with unequal power division between the carrier and peaking amplifiers are also evaluated and compared with the adaptive Doherty amplifier. The amplifiers are designed using a 10 W LDMOS FET device, the MRF282. The adaptive Doherty amplifier and the uneven Doherty amplifier show significant improvements in efficiency and output power over the even Doherty amplifier. At PEP the adaptive Doherty delivers 42.4 dBm at 39.75 % power added efficiency (PAE), the uneven Doherty amplifier 41.9 dBm at 40.75 % PAE and the even Doherty amplifier 40.8 dBm at 38.6 % PAE. At 3dB backed-off input power the adaptive Doherty amplifier has an efficiency of 34.3%, compared to 34.9 5% for the uneven Doherty amplifier and 29.75 % for the even Doherty amplifier. / AFRIKAANSE OPSOMMING: Moderne kommunikasie stelsels vereis effektiewe, linieêre drywing versterkers. Die versterkers word dikwels in laer drywings vlakke bedryf waar linieêre versterkers soos ’n klas B versterker besondere lae effektiwiteit het. Die Doherty versterker bied ’n uitweg omdat dit verbeterde effektiwiteit by lae drywings vlakke bied. ’n Doherty versterker bestaan uit twee versterkers, die hoof versterker en die aanvullende versterker, waarvan die uittrees met ’n spesiale kombinasie netwerk bymekaar gevoeg word. Die implementasie van Doherty versterkers met transistors is nie ideaal nie. Een van die hoof probleme is die onvoldoende stroom wat deur die aanvullings versterker gebied word by piek omhulsel drywing (POD). ’n Oplossing vir die probleem is om ’n aanpassings sisteem te gebruik wat die aanvullende versterker se hekspanning dinamies beheer afhangende van die intree drywings vlakke. Die ontwerp en evaluasie van so ’n aanpassings Doherty versterker is die hoof doel van hierdie tesis. ’n Klassieke Doherty versterke met gelyke drywings verdeling en ’n ongelyke Doherty versterker wat gebruik maak van ongelyke drywings verdeling tussen die hoof-en aanvullende versterkers is ook gevalueer en vergelyk met die aanpassings Doherty versterker. Die versterkers was ontwerp met ’n 10 W LDMOS FET, die MRF282. Die aanpassings Doherty versterker en die ongelyke Doherty versterker het aanmerklike verbeteringe in effektiwiteit en uittree drywing gebring in vergelyking met die ewe Doherty versterker. By POD het die aanpassings versterker 42.4 dBm teen 39.75 % drywing toegevoegde effektiwiteit (DTE) gelewer, die ongelyke Doherty versterker 41.9 dBm teen 40.75 % DTE, en die ewe Doherty versterker 40.8 dBm teen 38.6 DTE. By ’n intree drywingsvlak 3 dB laer as POD het die aanpassings Doherty versterker ’n effektiwiteit van 34.3 % getoon, in vergelyking met die onewe Doherty versterker se 34.9 % en die ewe Doherty versterker se 29.75 % DTE.