11 |
Functions of the golgin coiled-coil proteins of the Golgi apparatusWong, Mei Wai Mie January 2014 (has links)
No description available.
|
12 |
Modeling and control of packed reactive distillation columnsPeng, Jianjun 13 July 2011 (has links)
Not available / text
|
13 |
Micro-distillation studies in continuous flow analysis /McLeod, Stanley. Unknown Date (has links)
Thesis (PhD)--University of South Australia, 1993
|
14 |
Design of an orthopaedic instrument for image guided anterior cruciate ligament reconstructionMayson, Scott A. January 2006 (has links)
Thesis (PhD) - Swinburne University of Technology, Industrial Research Institute Swinburne - 2006. Thesis (PhD) - National School of Design, Swinburne University of Technology, 2006. / A thesis submitted to the Industrial Research Institute Swinburne (IRIS) and the National Institute of Design in fulfilment of the requirements for the degree of Doctor of Philosophy, - 2006. Typescript. Includes bibliographical references (p. 192-199).
|
15 |
Low temperature oxidation of carbon monoxide using microfibrous entrapped catalysts for fire escape mask applicationKaranjikar, Mukund R., Tatarchuk, Bruce J. January 2005 (has links)
Dissertation (Ph.D.)--Auburn University, / Abstract. Vita. Includes bibliographic references (p.174-178).
|
16 |
Designing to increase user acceptance of respiratory protection /Abkowitz, David. January 1989 (has links)
Thesis (M.F.A.)--Rochester Institute of Technology, 1989. / Typescript. Includes bibliographical references.
|
17 |
Determining organic vapor cartridge breakthrough characteristics of JP-8 during aircraft fuel tank entry operationsCulp, Kevin W. January 2000 (has links)
Thesis (M.S.)--West Virginia University, 2000. / Title from document title page. Document formatted into pages; contains xiii, 157 p. : ill. (some col.) Includes abstract. Includes bibliographical references (p. 84-86).
|
18 |
Refurbished electronics assembly equipment case studies for R & D and manufacturing /Kane, Amol S. January 2004 (has links)
Thesis (M.S.)--State University of New York at Binghamton, Thomas J. Watson School of Engineering and the Applied Sciences, 2004. / Includes bibliographical references.
|
19 |
Synchronized high frequency jet ventilation during extracorporeal shock wave lithotripsyWarlick, Kathleen Marie, 1956- January 1988 (has links)
Physiologic and Extracorporeal Shock Wave Lithotripsy (ESWL) data were collected before, during and after ESWL from four patient groups employing different anesthetic techniques (epidural anesthesia, general anesthesia with low-volume conventional mechanical ventilation or with unsynchronized high frequency jet ventilation (HFJV) or with HFJV synchronized to the heart rate). The primary goal was to determine if synchronized HFJV had any beneficial effects. A synchronization unit was fabricated that triggered one HFJV breath, per heart beat, delivered 30 milliseconds after the shock wave. This allowed only expiratory motion during shock wave administration. Results were analyzed using one-way analysis of variance, Students t-tests and chi-square tests with significance at p 0.05. Results showed that renal stone excursion was significantly less in HFJV groups and that significantly more patients required re-treatment in non-HFJV groups. No results indicated that synchronizing HFJV had any further benefits than unsynchronized HFJV.
|
20 |
Quantitative respirator fit testing by negative pressureMurphy, Richard Wright, 1958- January 1989 (has links)
An automated system for quantitative respirator fit testing by negative pressure was evaluated by comparison testing with a computerized aerosol fit test system (Dynatech Frontier Model 260A). The new negative pressure system measures leakage flow while inspiratory pressures are sustained in a respirator facepiece rather than by pressure decay. Four phases of comparison testing were graduated by level of control, ranging from non-subject tests with hypodermic needle leakages to fit tests of 125 Air Force personnel. Throughout the series of tests, negative pressure fit factors were consistently more conservative than aerosol fit factors and showed less variability. Leakage flow rates measured by the negative pressure instrument were highly correlated with leak needle cross-sectional area as predicted by principles of air-flow physics. Comparison of subject and non-subject generated aerosol fit factors indicated significant aerosol losses, possibly due to streamlining and respiratory tract deposition. Negative pressure fit factors were not affected by these subject-related losses.
|
Page generated in 0.0536 seconds