The need for renewable energy is increasing as a result of global warming and other environmental challenges. Renewable energy systems are intermittent in nature and require energy storage solutions. Lithium-ion batteries are the first choice for storing electrical energy due to their high energy density, long cycle life, and small size. However, their widespread use in grid-scale applications is limited by high cost, low lithium resources, and security issues. Among the various options, the rechargeable zinc ion water battery has the advantages of high economic efficiency, high safety, and environmental friendliness, and there are great expectations for energy storage on a network scale. Inspired by these benefits, people have put a lot of effort into developing and manufacturing zinc-based energy storage devices. As the main component of zinc ion battery, the cathode material plays an important role in the storage / release of zinc ions during insertion and extraction. Vanadium-based materials are attracting attention due to their various oxidation states, diverse structures, and abundant natural resources. However, the details of suitable cathode materials and Zn2+ storage mechanism for rechargeable zinc ion battery are not yet fully understood. In this thesis, firstly, the prepared zinc pyrovanadate delivers good zinc ion storage properties owing to its open-framework crystal structure and multiple oxidation states. Mechanistic details of the Zn-storage mechanism in zinc pyrovanadate were also elucidated. Then, a calcium vanadium oxide bronze with expanding cavity size, smaller molecular weight, and higher electrical conductivity are proposed to deeply understand the impact of the crystal structure on battery performance. To improve the stability of the cathode in rechargeable zinc ion battery, an artificial solid electrolyte interphase strategy has been proposed by inducing an ultrathin HfO2 layer via the Atomic layer deposition method, which effectively alleviates the dissolution of active material. Finally, a nitrogen-doped 3D laser scribed graphene with a large surface area and uniform distribution of nucleation sites has been used as the interlayer to control Zn nucleation behavior and suppress Zn dendrite growth, which brings new possibilities for the practical rechargeable zinc ion battery.

The growing renewable energy consumption has stimulated the rapid development of diverse energy storage systems (ESSs) in our electronic society. As a successful representative, lithium-ion batteries (LIBs) play a vital role in meeting today's energy storage demand. However, LIBs are plagued by intrinsic unsafety and detrimental environmental contamination. In this respect, rechargeable aqueous zinc-ion batteries (ZIBs) and supercapacitors (SCs) as potential alternatives have attracted considerable attention due to their characteristics such as innate safety, environmental friendliness, cost-effectiveness, competitive gravimetric energy density, and loose fabrication process. Inspired by these merits, massive efforts have been devoted to designing and exploring high-performance aqueous Zn-based energy storage devices. The key for advanced Zn-based energy storage devices is to exploit high-performance cathode materials. Covalent organic frameworks (COFs) are an emerging class of organic polymer with periodic skeletons showing attractive properties in structural tunability, well-defined porosity, functional versatility, and high chemical stability. The distinguishing features of COFs make them promising electrode materials for electrochemical energy storage applications. However, the electrochemical storage capability and charge storage mechanism of COF materials have been rarely investigated, and their potential applications have not been evaluated yet so far. In this thesis, COFs are proposed as cathode materials for rechargeable aqueous Zn-ion energy storage. Initially, a new phenanthroline COF (PA-COF) material was synthesized and used as an electrode for Zn-ion supercapatteries (ZISs) for the first time. The as-synthesized PA-COF shows abundant nucleophilic sites and suitable pore structure, demonstrating the efficient storage capability of Zn2+ and H+. Further, hexaazatriphenylene-based COF (HA-COF) material with and without precisely grafted quinone functional groups has been proposed to understand structure-activity relationships. In this chapter, the influence of quinone groups on the electrochemical performance of HA-COF has been systematically studied, disclosing an enhancement coordination capability of Zn ions against protons in the quinone-functionalized HA-COF. Lastly, we synthesized a radical benzobisthiazole COF (BBT-COF) and deeply investigated the electrochemical performance. As expected, this COF electrode shows an ultrastable cycling performance and demonstrates a radical reaction pathway.

Améliorer notre compréhension des mécanismes de transport/transfert de charges et de stockage de charges dans les films d'oxyde métallique semi-conducteur mésoporeux transparents (fonctionnalisés ou non par des chromophores redox-actifs) dans des électrolytes aqueux est d'une importance fondamentale pour le développement et l'optimisation d'une large gamme de dispositifs de production ou de stockage d'énergie éco-compatibles et/ou éco-durables (cellules solaires à colorants, batteries, photoélectrolyseurs, ….). Dans ce but, des films de TiO2 semi-conducteur mésoporeux préparés par dépôt sous incidence rasante (GLAD-TiO2) ont été sélectionnés pour leur grande surface spécifique, leur morphologie bien contrôlée, leur transparence élevée dans le visible et leur semiconductivité bien définie qui peut être facilement ajustée par l’application d’un potentiel externe, autorisant ainsi leur caractérisation aisée par spectroélectrochimie en temps réel. Nous avons d'abord étudié le transfert et transport de charges dans des électrodes GLAD-ITO et GLAD-TiO2 fonctionnalisées par une porphyrine de manganèse redox-active jouant à la fois le rôle de chromophore et de catalyseur. Nous avons démontré que la réponse électrochimique des électrodes ainsi modifiées, enregistrée en l'absence ou en présence du substrat O2, dépend fortement de la conductivité du film mésoporeux. En utilisant la voltamétrie cyclique couplée à la spectroscopie d'absorption UV-visible, nous avons pu extraire des informations clés telles que la vitesse du transfert d'électrons hétérogène entre le chromophore redox immobilisé et le matériau semi-conducteur, et aussi pu rationaliser le comportement électrochimique spécifique obtenu sur un film GLAD-TiO2 modifié par la porphyrine en condition catalytique. En parallèle, nous avons développé un procédé de fonctionnalisation de ces films d'oxyde métallique mésoporeux (en l’occurrence des films GLAD-ITO) par électrogreffage de sels d'aryldiazonium générés in situ, permettant d'obtenir des électrodes fonctionnalisées avec un taux de recouvrement surfacique élevé et une stabilité dans le temps particulièrement bonne en conditions hydrolytiques. Nous avons également étudié le stockage de charges au sein d’électrodes GLAD-TiO2 dans divers électrolytes aqueux. Nous avons notamment démontré pour la première fois qu’une insertion rapide, massive et réversible de protons peut être effectuée dans des films de TiO2 nanostructurés amorphes immergés dans un tampon aqueux neutre, le donneur de protons étant alors la forme acide faible du tampon. Nous avons également démontré que ce processus de stockage d’électrons couplé à l’insertion de protons peut se produire sur toute la gamme de pH et pour un vaste panel d'acides faibles organiques ou inorganiques, mais aussi de complexes aqueux d'ions métalliques multivalents, à condition que le potentiel appliqué et le pKa de l'acide faible soient correctement ajustés. / Better understanding of the mechanisms of charge transport/transfer and charge storage in transparent mesoporous semiconductive metal oxide films (either functionalized or not by redox-active chromophores) in aqueous electrolytes is of fundamental importance for the development and optimization of a wide range of safe, eco-compatible and sustainable energy producing or energy storage devices (e.g., dye-sensitized solar cells, batteries, photoelectrocatalytic cells, …). To address this question, mesoporous semiconductive TiO2 films prepared by glancing angle deposition (GLAD-TiO2) were selected for their unique high surface area, well-controlled morphology, high transparency in the visible, and well-defined semiconductivity that can be easily adjusted through an external bias, allowing thus their characterization by real-time spectroelectrochemistry. We first investigated charge transfer/transport at GLAD-ITO and GLAD-TiO2 electrodes functionalized by a redox-active manganese porphyrin that can play both the role of chromophore and catalyst. We demonstrate that the electrochemical response of the modified electrodes, recorded either in the absence or presence of O2 as substrate, is strongly dependent on the mesoporous film conductivity. By using cyclic voltammetry coupled to UV-visible absorption spectroscopy, we were able to recover some key information such as the heterogeneous electron transfer rate between the immobilized redox-active dye and the semiconductive material, and also to rationalize the specific electrochemical behavior obtained at a porphyrin-modified GLAD TiO2 film under catalytic turnover. In parallel, we developed a new functionalization procedure of mesoporous metal oxide films (GLAD-ITO in the present case) by electrografting of in-situ generated aryldiazonium salts, allowing for modified electrodes characterized by both a high surface coverage and a particularly good stability over time under hydrolytic conditions. Also, we investigated charge storage at GLAD-TiO2 electrodes under various aqueous electrolytic conditions. We notably evidenced for the first time that fast, massive, and reversible insertion of protons can occur in amorphous nanostructured TiO2 films immersed in near neutral aqueous buffer, with the proton donor being the weak acid form of the buffer but not water. We also demonstrated that this proton-coupled electron charge storage process can occur over the entire range of pH and for a wide range of organic or inorganic weak acids, but also of multivalent metal ion aquo complexes, as long as the applied potential and pKa of weak acid are properly adjusted.