Thesis (M.S.)--West Virginia University, 2005. / Title from document title page. Document formatted into pages; contains x, 121 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 93-99).

Thesis (M.S.)--West Virginia University, 2005. / Title from document title page. Document formatted into pages; contains vi, 82 p. : ill. Includes abstract. Includes bibliographical references (p. 62-63).

Thesis (M.S.)--West Virginia University, 2005. / Title from document title page. Document formatted into pages; contains viii, 78 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 69-71).

Asphalt concrete pavement is subjected to several damaging actions from traffic loads, water (from precipitation and/or groundwater sources), and temperature. The durability of the asphalt-aggregate mixture, its ability to withstand these damaging actions for long periods, is a very important engineering property. While the durability of the asphalt-aggregates mixture depends on several factors such as the mixture's properties, construction methods, traffic loads and environmental conditions, they have to be evaluated to predict their field performance. Based on mixture evaluations, the mixtures that fail the test would have to be modified by additives or by changing the materials. The first objective of this thesis was to evaluate asphalt-aggregate mixtures for water damage using the Environmental Conditioning System (ECS), and rank the asphalt and aggregate types based on water sensitivity. The second objective was to relate the ECS ranking of the asphalt and aggregate types to Oregon State University (OSU) and University of Nottingham, UK (SWK/UN) wheel tracking test results, and to Net Adsorption Test (NAT) results. The third objective was to evaluate open-graded mixtures and rubber modified mixtures for water sensitivity using the ECS. The ECS test results indicate that performance ranking of mixtures by asphalt type or aggregate type alone cannot be made for the ECS test results due to the significant interaction between asphalt and aggregate. Water sensitivity in the ECS is significant for combinations of asphalt and aggregate. The ECS test results have shown that ECS performance ranking after one cycle is not statistically significant and does not correlate with ranking after three cycles. The results show that the ECS test program has similar aggregate rankings to those of the NAT and SWK/UN test program, while good agreement exists between SWK/UN wheel tracking results and the NAT test program results. However, poor agreement exists between the OSU wheel tracking results and those of the other two tests. Poor or very little agreement exists among the wheel tracking test results, ECS, and NAT test results in terms of asphalt type rankings. When considering the comparisons of materials ranking by different test procedures, one must keep in mind that the mechanisms leading to varying "performance" are not the same. The testing reported herein was aimed at measuring water sensitivity, but all the tests do not do so directly. The NAT procedure addresses only the potential for stripping (adhesion) and is not capable of evaluating cohesion loss. The other tests (ECS, OSU and SWK/UN wheel tracking) included all the mechanisms simultaneously, and these provided a gross effect without clearly separating the cause of failure in each case. Open-graded mixtures used by Oregon Department of Transportation (ODOT) performed well in the ECS in terms of water sensitivity. In the ECS evaluation, six mixtures passed the criteria of 75 % established for Indirect Retained Strength (IRS) test by ODOT, and one mixture was marginal. However, only one mixture passed the IRS evaluation, and another mixture was marginal. This confirms that the IRS test is a very severe test and is not suitable for water sensitivity evaluation of open-graded mixtures. Finally, the IRS test evaluation would suggest that these mixtures would fail prematurely after construction, but all of these mixtures have been used in projects which have been in service for more than three years with no visible signs of distress, or failures. / Graduation date: 1994

Environmental factors such as temperature, air, and water can have a profound effect on the durability of asphalt concrete mixtures. In mild climates where good quality aggregates and asphalt cement are available, the major contribution to deterioration may be due to traffic loading and the resultant distress is manifested in the form of fatigue cracking, rutting, and raveling. But, when more severe climates are coupled with poor materials and traffic, premature failure may result. The objectives of this research are twofold and includes: (1) development of a test system to evaluate the most important factors influencing the water sensitivity of asphalt concrete mixtures; and (2) development of laboratory testing procedures that will predict field performance. This research also addresses the hypothesis that much of the water damage in pavements is due to water in the asphalt concrete void system. It is proposed that most of the water problems occur when voids are in the range of about 5% to 12%. Thus, the term "pessimum" voids is used to indicate that range (opposite of optimum). In order to evaluate the hypothesis and the numerous variables, the Environmental Conditioning System (ECS) was designed and fabricated. The ECS consists of three subsystems: (1) fluid conditioning, where the specimen is subjected to predetermined levels of water, air, or vapor and permeability is measured; (2) an environmental cabinet that controls the temperature and humidity and encloses the entire load frame; and (3) the loading system that determines resilient modulus (M[subscript n]) at various times during environmental cycling and also provides continuous repeated loading as needed. The ECS has been used to evaluate four core materials and also to investigate the relative importance of mixture variables thought to be significant. Many details regarding specimen preparation and testing procedures were evaluated during a "shakedown" of the ECS. As minor variables were resolved, a procedure emerged which appears to be reasonable and suitable. An experiment design for the four core mixtures was developed, and the overall experiment design included three ranges of void ( <5% low; 5-12%, pessimum; > 12% high). Six-hour cycles of wet-hot (60° C) and wet-freeze ( -18° C) are the principle conditioning variables, while monitoring MR at 25° C before and between cycling. A conventional testing procedure (AASHTO T-283) was also used on the core mixtures to provide a baseline for comparison. Results to date show that the ECS is capable of discerning the relative differences in "performance" such as MR. Three hot cycles and one freeze cycle appear to be sufficient to determine the projected relative performance when comparing different aggregates, asphalts, void levels, loading, etc. Based on these results, a water conditioning procedure has been recommended and also a procedure for water conditioning specimens prior to testing in fatigue, rutting, and thermal cracking. / Graduation date: 1992

Thesis (Ph. D.)--University of Texas at Austin, 2002. / Vita. Includes bibliographical references. Available also from UMI Company.

Thesis (Ph. D.)--West Virginia University, 2003. / Title from document title page. Document formatted into pages; [256] p. : ill. (some col.). Includes abstract. Includes bibliographical references.

Thesis (M.S.)--West Virginia University, 2003. / Title from document title page. Document formatted into pages; contains viii, 69 p. : ill. (some col.), col. maps. Includes abstract. Includes bibliographical references (p. 55-58).

No description available.

Thesis (Ph. D.)--Washington State University, May 2008. / Includes bibliographical references (p. 166-182).