11 |
The influence of nitrogen on the sensitization and microstructural properties of AISI 304 stainless steels /Betrabet, Hemant Shridhar January 1986 (has links)
No description available.
|
12 |
Influence of composition, grain size and manufacture process on the anisotropy of tube materialsGullberg, Daniel January 2010 (has links)
<p>A problem with cold pilgered tubes for OCTG applications is that they can get anisotropic properties with regard to yield strength. One source of anisotropy is texture that is developed during the cold deformation. EBSD measurements have been made on several austenitic stainless steels with different deformations to see what influence the composition has on the texture formation. The same measurements were used to study the influence of grain size on texture formation. The conclusion was that the composition can have an impact on the texture and hence has potential to also affect the anisotropy. The differences in texture cannot be associated with a specific alloying element, but is rather a synergetic effect. It was also concluded that grain structure has no strong influence on texture formation. An evaluation of three different tool designs used for cold pilgering was made. The designs evaluated are referred to as design A, B and C. EBSD measurements showed large deviations in texture in the middle of the wall compared to close to the surface of pilgered OCTG. However, the measurements showed no large differences between the three designs and the texture could not be coupled to the anisotropy.</p>
|
13 |
Influence of composition, grain size and manufacture process on the anisotropy of tube materialsGullberg, Daniel January 2010 (has links)
A problem with cold pilgered tubes for OCTG applications is that they can get anisotropic properties with regard to yield strength. One source of anisotropy is texture that is developed during the cold deformation. EBSD measurements have been made on several austenitic stainless steels with different deformations to see what influence the composition has on the texture formation. The same measurements were used to study the influence of grain size on texture formation. The conclusion was that the composition can have an impact on the texture and hence has potential to also affect the anisotropy. The differences in texture cannot be associated with a specific alloying element, but is rather a synergetic effect. It was also concluded that grain structure has no strong influence on texture formation. An evaluation of three different tool designs used for cold pilgering was made. The designs evaluated are referred to as design A, B and C. EBSD measurements showed large deviations in texture in the middle of the wall compared to close to the surface of pilgered OCTG. However, the measurements showed no large differences between the three designs and the texture could not be coupled to the anisotropy.
|
14 |
Novel ways of using Nd:YAG laser for welding thick section austenitic stainless steel /Jokinen, Tommi. January 2004 (has links) (PDF)
Thesis (doctoral)--Lappeenranta University of Technology, 2004. / Includes bibliographical references (p. 115-120). Also available on the World Wide Web.
|
15 |
Microstructural influence on dynamic properties of age hardenable FeMnAl alloysHowell, Ryan Andrew, January 2009 (has links) (PDF)
Thesis (Ph. D.)--Missouri University of Science and Technology, 2009. / Vita. The entire thesis text is included in file. Title from title screen of thesis/dissertation PDF file (viewed August 25, 2009) Includes bibliographical references.
|
16 |
Enhancement of biocompatibility of 316LVM stainless steel by electrochemical cyclic potentiodynamic passivationShahryari, Arash. January 2008 (has links)
Note: / as hip and knee prosthesis, orthopaedic fixations and coronary stents. The definition of a material's biocompatibility necessitates meeting a number of criteria, including high corrosion resistance and desirable interactions of the material's surface with biological species, such as cells, platelets, and serum proteins. SSs offer acceptable resistance to uniform (general) corrosion when used as materials of construction in sorne industrial applications, which is due to the formation of a thin passive oxide film on their surface. [...] / Les aciers inoxydables (AI) 316-L sont fréquemment utilisés dans le domaine biomédical. Par exemple, nous les retrouvons dans les prothèses de hanche et de genou, dans les fixatures orthopédiques et dans les prothèse vasculaires. Pour qu'un matériel soit biocompatible, il doit avoir une résistence élevée à la corrosion. De plus, la surface du matériel doit avoir des intéractions favorables avec les différentes espèces biologiques c'est-à-dire les cellules.[...]
|
17 |
Controlled chloride cracking of austenitic stainless steelRaseroka, Mantsaye S. January 2009 (has links)
Thesis (M.Sc. in Applied Science(Metallurgical Engineering))--University of Pretoria, 2008. / Abstract in English. Includes bibliographical references (leaves 67-69).
|
18 |
Enhancement of biocompatibility of 316LVM stainless steel by electrochemical cyclic potentiodynamic passivationShahryari, Arash. January 2008 (has links)
Note:
|
19 |
Impact fracture of austenitic stainless steelsKornegay, Cynthia E. January 1985 (has links)
Industry is constantly searching for improved materials for use in highly demanding applications. The materials chosen must withstand a wide range of temperatures and extended exposure in aggressive environments, including hydrogen gas. Because of the risk of catastrophe if brittle failure occurs, careful material selection is imperative. Austenitic stainless steels may be a likely choice for hydrogen service because their behavior in high pressure hydrogen ranges from no apparent damage to relevant, but generally small ductility loss (13). Because of this Variation in behavior, a single category cannot be established to encompass all austenitic steels and studies must be performed on each type of steel to determine its behavior under specific circumstances. Two steels being currently under consideration for use in hydrogen are Armco 21-6-9 and Tenelon, both are fully austenitic stainless steels which may be used over a wide range of temperatures, including service at liquid nitrogen temperature. / Master of Science / incomplete_metadata
|
20 |
Cracking of cold drawn resulfurized type 303 hexagon barsGault, Paul Alan January 1982 (has links)
Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 1982. / MICROFICHE COPY AVAILABLE IN ARCHIVES AND SCIENCE / Includes bibliographical references. / by Paul Alan Gault. / M.S.
|
Page generated in 0.1134 seconds