The objective of this thesis is to introduce novel procedures and guidelines to design bandstop microwave filters for modern terrestrial and satellite wireless communication systems. Among all available microwave filter technologies, planar structures of microstrip and substrate integrated waveguide (SIW) are chosen, due to ease of fabrication, low profile, weight and manufacturing cost. Particularly, SIW structures are more attractive because they have a better insertion loss, quality factor, and power handling capability in comparison to their microstrip counterparts, and can also be easily integrated into other planar circuitries. A comprehensive hybrid analytic-optimization method is developed to synthesize any single-band as well as multi-band bandstop coupling matrix. In this method, the location of reflection zeros (RZs) and the attenuations in stopbands can be determined in advance. Several novel single-band, dual-band, and triple-band bandstop filters are designed using regular and ridged SIW resonators, in-line coupled singlet resonators, cross-coupled resonators, and bandstop stubs. The designed filters have fractional bandwidths up to 23% . Moreover, a tunable ridged SIW bandstop resonator and a tunable CPW resonator, etched into the top plate of the SIW transmission line, are introduced. Combining these two resonators, a dual-band SIW filter is designed that permits one of its stopband to be tuned while another stopband is fixed. All introduced filters in this thesis are verified by commercial electromagnetic software, analytic investigations using Matlab codes, and measurements. / Graduate

Superconducting microelectronics (SME) technology has the potential of realizing very high speed digital receivers capable of performing direct digitization of radio frequency signals with very low power consumption. The SME receiver is implemented on a single chip using Niobium based low temperature superconductive (LTS) Josephson Junction (JJ) technology by HYPRES. Analogue RF filters are still required at the receiver front end and are key components of the overall superconductor digital receiver. SME receivers usually require two types of RF filters; a wideband bandpass filter and a bandstop filter (a notch filter). The notch filter is required to eliminate interference and unwanted signals in the passband. In this thesis, design of highly miniaturized lumped element wideband and bandstop filters is investigated and some challenges are addressed. The filters are fabricated by the HYPRES process and therefore can be integrated with the SME receiver on the same chip. In a wideband filter, the coupling between the adjacent resonators is high. Achieving such a strong coupling is one of the challenges of designing wideband filters. The wideband filters realized with distributed elements usually suffer from very low spurious frequency. As the bandwidth of the filter becomes wider, the spurious peak of the second harmonic gets closer to the passband of the filter. In the first part of this work, the possibility of realizing lumped element superconducting bandpass filters (BPF) with a relative bandwidth of 80% is investigated. In the second part of the thesis, design and realization of lumped element superconducting bandstop filters (BSF) is discussed. The challenge for designing a bandstop filter is providing a good match over a wide frequency range. So narrowband inverters cannot be used. Instead, usually λ/4 matched transmission lines provide 90° phase shift between the resonators of a notch filter. The possibility of replacing the long transmission line with other means or eliminating the inverters and using both shunt and series resonators are investigated. Having both series and shunt resonators introduces some new challenges that are addressed in the thesis and discussed thoroughly. A tunable notch resonator is presented. The tunability is provided by a superconducting MEMS varactor that is realized in our group by doing some post processing on the device fabricated by HYPRES. The tunability range of the device at cryogenic temperatures is investigated. A 3-pole tunable BSF is also designed that uses the same tunable resonators. The tunability of the filter is investigated through simulation.

Superconducting microelectronics (SME) technology has the potential of realizing very high speed digital receivers capable of performing direct digitization of radio frequency signals with very low power consumption. The SME receiver is implemented on a single chip using Niobium based low temperature superconductive (LTS) Josephson Junction (JJ) technology by HYPRES. Analogue RF filters are still required at the receiver front end and are key components of the overall superconductor digital receiver. SME receivers usually require two types of RF filters; a wideband bandpass filter and a bandstop filter (a notch filter). The notch filter is required to eliminate interference and unwanted signals in the passband. In this thesis, design of highly miniaturized lumped element wideband and bandstop filters is investigated and some challenges are addressed. The filters are fabricated by the HYPRES process and therefore can be integrated with the SME receiver on the same chip. In a wideband filter, the coupling between the adjacent resonators is high. Achieving such a strong coupling is one of the challenges of designing wideband filters. The wideband filters realized with distributed elements usually suffer from very low spurious frequency. As the bandwidth of the filter becomes wider, the spurious peak of the second harmonic gets closer to the passband of the filter. In the first part of this work, the possibility of realizing lumped element superconducting bandpass filters (BPF) with a relative bandwidth of 80% is investigated. In the second part of the thesis, design and realization of lumped element superconducting bandstop filters (BSF) is discussed. The challenge for designing a bandstop filter is providing a good match over a wide frequency range. So narrowband inverters cannot be used. Instead, usually λ/4 matched transmission lines provide 90° phase shift between the resonators of a notch filter. The possibility of replacing the long transmission line with other means or eliminating the inverters and using both shunt and series resonators are investigated. Having both series and shunt resonators introduces some new challenges that are addressed in the thesis and discussed thoroughly. A tunable notch resonator is presented. The tunability is provided by a superconducting MEMS varactor that is realized in our group by doing some post processing on the device fabricated by HYPRES. The tunability range of the device at cryogenic temperatures is investigated. A 3-pole tunable BSF is also designed that uses the same tunable resonators. The tunability of the filter is investigated through simulation.

<div>In recent years, intelligent devices such as smartphones and self-driving cars are becoming ubiquitous in daily life, and thus, wireless communication is turning out to be increasingly omnipresent. To efficiently utilize the electromagnetic spectrum, automatically reconfigurable software-controlled radio transceivers are drawing an extensive amount of attention. In order to implement a reconfigurable radio transceiver, automatically tunable RF front-end components such as tunable filters are indispensable. Over the last decade, tunable filters have shown promising performance with high-quality factor (Q), a wide tuning range, and high-power handling. However, most of the existing tunable filters are manually adjusted. In this regard, this research work focuses on developing a novel automatic software-driven tuning technique for continuously tunable microwave and millimeter-wave filters.</div><div><br></div><div><br></div><div>First, a K-band continuously tunable bandpass filter has been demonstrated with contactless printed circuit board (PCB) tuners. Then, an automatic tuning technique based on deep-Q learning has been proposed and realized to tune a filter with contactless tuners automatically. Two-pole, three-pole, and four-pole bandpass filters are experimentally tested as examples without any human intervention to prove the feasibility of the tuning technique. For the first time, unlike a look-up table, the filters can be continuously tuned at a practically infinite number of frequencies inside the tuning range. </div><div><br></div><div>Next, a K/Ka-band tunable absorptive bandstop filter (ABSF) has been designed and fabricated in low-cost PCB technology. Contrary to a reflective bandstop filter, an ABSF filter is preferred for interference mitigation due to its deeper notch and lower reflection. However, the absorbed power may limit the filter's power handling. Therefore, lastly, a comparative analysis of power handling capability (PHC) between a reflective bandstop filter and an absorptive bandstop filter has been studied theoretically and experimentally in this dissertation.</div>