11 |
Feed-Forward Bandwidth Indication: An Accurate Approach to Multimedia Bandwidth Forecasting and its Application in Ethernet Passive Optical NetworksHaddd, Rami J. 10 August 2011 (has links)
No description available.
|
12 |
Implementing Network Quality of Service at Ohio UniversitySaunders, Brandon A. January 2005 (has links)
No description available.
|
13 |
Power, Bandwidth and Complexity in Maximum Likelihood Sequence EstimationWong, Cheung 06 1900 (has links)
This thesis is missing page 155, the other copies of the thesis are also missing this page. -Digitization Centre / This thesis develops a two dimensional Viterbi Algorithm for the maximum likelihood sequence estimation over band limited baseband channels with intersymbol interference. Degradation, decision depth, 99% energy bandwidth and the channel cost are used as the performance measures for the comparisons of different channels. The four measures are extensively evaluated for channels with length up to four signalling intervals. The results of each measure are presented in contour form. Error events analysis shows that the degradation contours are governed by elliptical equations. Maximum degradation results from state path merge at a depth equal to the channel length plus one. By analysing periodic state sequences, we found that catastrophic error propagation contours are mainly governed by linear equations. Generally, channels with longer length have narrower minimum bandwidth but higher degradation.
A channel cost similar to Shannon capacity equation is proposed to jointly minimize both degradation suffered and bandwidth required for signalling over a channel. According to the equation, the channel cost is influenced more by the bandwidth than by the degradation and thus the regions of low channel cost lie on the regions of narrow bandwidth. Also low channel cost regions are found to be on the regions of long decision depth and thus require higher complexity for maximum likelihood sequence estimation. In addition, it is found that minimum channel cost decreases with increasing channel length. / Thesis / Master of Engineering (ME)
|
14 |
A Nonlinear Technique for Bandwidth Improvement in Narrowband AntennasZilevu, Kojo Sitsofe 05 June 2012 (has links)
Electrically small, low profile antennas have become the new frontier in wireless communication research. With the pressure to miniaturize wireless communication devices, engineers are turning to small low profile antennas as a way to reduce their antennas and hence their devices.
Ideally, one would also like to at least maintain antenna bandwidth and efficiency while reducing size. However, in theory, antenna performance degrades when it is miniaturized—impedance bandwidth decreases with the reduction in antenna size.
This thesis investigates the possibility of increasing the input impedance bandwidth without enlarging the volume of the antenna. This thesis attempts to break the fundamental tradeoff between antenna size and bandwidth by loading it with a nonlinear element. First, a brief summary of antenna background definitions is presented. Next, the analytical framework of the thesis is presented using a model of a narrowband antenna.
A literature review of various narrowband electrically small antennas is studied, including the pros and cons of the Inverted-F antenna (IFA), Inverted-L antenna (ILA), and the Planar Inverted-F antenna (PIFA).Next, the analysis and the methodology leading to results are discussed and simulated results are presented. Simulated results show that the PIFA is able to achieve a higher bandwidth with a loaded nonlinear element. However, it is difficult to sustain the efficiency of the antenna due to harmonics generated by nonlinearity in the antenna. Results indicate that an increase in nonlinearity tends to generate harmonics which leads to losses in the antenna. / Master of Science
|
15 |
Sectorized Bandwidth Reservation Scheme for Multimedia Wireless NetworksYen, Yu-Lin 06 September 2002 (has links)
Because of the advancement of wireless networks, it is important to provide quality-of-service (QoS) guarantees as they are expected to support multimedia applications. In this paper we propose a new bandwidth reservation scheme based on the characteristic of the cell equipped with sector antenna. According to this information, the proposed scheme can predict the next location of each connection and precisely reserve bandwidth in appropriate neighboring cells, not all of its neighboring cells. Besides, the proposed scheme uses bandwidth borrowing mechanism to be our call admission control strategy. The combination of bandwidth reservation and bandwidth borrowing provides network users with QoS in terms of guaranteed bandwidth, call blocking and call dropping probabilities.
|
16 |
A Bandwidth Estimation Method for IP Version 6 NetworksCrocker, Marshall 09 December 2006 (has links)
Efficiently and accurately estimating bandwidths in packet networks is a problem that has intrigued researchers for years. There is no simple manner for estimating bandwidths in IPv4 networks that is accurate, efficient, flexible, and suitable for a variety of applications. Many of the available estimation techniques suffer from inherent flaws such as inaccuracy due to simple assumptions about the network or an overall high complexity that makes it inappropriate in all but a few highly specific situations. The next generation Internet Protocol, IP version 6, has the functionality necessary to implement feedback mechanisms to assist in accurate bandwidth estimations. This thesis proposes a timestamp hop-by-hop option for IPv6 and then applies this option to create a new bandwidth estimation technique. Instead of passive observations, the network infrastructure actively assists in bandwidth measurements resulting in a bandwidth estimation technique that is accurate, efficient, flexible, and suitable for many different applications and scenarios. Both analytical and simulation analysis show that the IPv6 bandwidth estimation technique outperforms a comparable IPv4 estimation method.
|
17 |
Bandwidth Selection Concerns for Jump Point Discontinuity Preservation in the Regression Setting Using M-smoothers and the Extension to hypothesis TestingBurt, David Allan 31 March 2000 (has links)
Most traditional parametric and nonparametric regression methods operate under the assumption that the true function is continuous over the design space. For methods such as ordinary least squares polynomial regression and local polynomial regression the functional estimates are constrained to be continuous. Fitting a function that is not continuous with a continuous estimate will have practical scientific implications as well as important model misspecification effects. Scientifically, breaks in the continuity of the underlying mean function may correspond to specific physical phenomena that will be hidden from the researcher by a continuous regression estimate. Statistically, misspecifying a mean function as continuous when it is not will result in an increased bias in the estimate.
One recently developed nonparametric regression technique that does not constrain the fit to be continuous is the jump preserving M-smooth procedure of Chu, Glad, Godtliebsen & Marron (1998),`Edge-preserving smoothers for image processing', Journal of the American Statistical Association 93(442), 526-541. Chu et al.'s (1998) M-smoother is defined in such a way that the noise about the mean function is smoothed out while jumps in the mean function are preserved. Before the jump preserving M-smoother can be used in practice the choice of the bandwidth parameters must be addressed. The jump preserving M-smoother requires two bandwidth parameters h and g. These two parameters determine the amount of noise that is smoothed out as well as the size of the jumps which are preserved. If these parameters are chosen haphazardly the resulting fit could exhibit worse bias properties than traditional regression methods which assume a continuous mean function. Currently there are no automatic bandwidth selection procedures available for the jump preserving M-smoother of Chu et al. (1998).
One of the main objectives of this dissertation is to develop an automatic data driven bandwidth selection procedure for Chu et al.'s (1998) M-smoother. We actually present two bandwidth selection procedures. The first is a crude rule of thumb method and the second is a more sophistocated direct plug in method. Our bandwidth selection procedures are modeled after the methods of Chu et al. (1998) with two significant modifications which make the methods robust to possible jump points.
Another objective of this dissertation is to provide a nonparametric hypothesis test, based on Chu et al.'s (1998) M-smoother, to test for a break in the continuity of an underlying regression mean function. Our proposed hypothesis test is nonparametric in the sense that the mean function away from the jump point(s) is not required to follow a specific parametric model. In addition the test does not require the user to specify the number, position, or size of the jump points in the alternative hypothesis as do many current methods. Thus the null and alternative hypotheses for our test are: H0: The mean function is continuous (i.e. no jump points) vs. HA: The mean function is not continuous (i.e. there is at least one jump point).
Our testing procedure takes the form of a critical bandwidth hypothesis test. The test statistic is essentially the largest bandwidth that allows Chu et al.'s (1998) M-smoother to satisfy the null hypothesis. The significance of the test is then calculated via a bootstrap method. This test is currently in the experimental stage of its development. In this dissertation we outline the steps required to calculate the test as well as assess the power based on a small simulation study. Future work such as a faster calculation algorithm is required before the testing procedure will be practical for the general user. / Ph. D.
|
18 |
A Wideband Stacked Microstrip Patch Antenna for Telemetry ApplicationsHategekimana, Bayezi 10 1900 (has links)
ITC/USA 2010 Conference Proceedings / The Forty-Sixth Annual International Telemetering Conference and Technical Exhibition / October 25-28, 2010 / Town and Country Resort & Convention Center, San Diego, California / This research article reports a design of a wide band multilayer microstrip patch antenna (MSPA). Positions of a coaxial probe feed to main patch of the multilayer MSPA, widths and lengths of main and parasitic patches, and height of a Rohacell foam layer in the multilayer MSPA were optimized to achieve desired performance in L-band. The work also reports a design of a two-by-two array of multilayer MSPA. We present results on antenna radiation patterns and return loss obtained with full wave finite element simulations with Ansoft HFSS software and measurements with a vector network analyzer.
|
19 |
Optimizing Bandwidth Utilization in Packet Based Telemetry SystemsKalibjian, Jeffrey R. 11 1900 (has links)
International Telemetering Conference Proceedings / October 30-November 02, 1995 / Riviera Hotel, Las Vegas, Nevada / A consistent theme in spacecraft telemetry system design is the desire to obtain
maximum bandwidth utilization given a fixed transmission capability (usually due to
cost/weight criteria). Extensions to basic packetization telemetry architectures are
discussed which can facilitate a reduction in the amount of actual data telemetered,
without loss of data quality. Central to the extensions are the establishment of an
"intelligent" telemetry process, which can evaluate pending data to be telemetered,
and act to compress, discard, or re-formulate data before actual transmission to ground
stations.
|
20 |
Exploring mobility in wireless ATM networksWhitley, Toby January 2001 (has links)
No description available.
|
Page generated in 0.0261 seconds