Spelling suggestions: "subject:"železobetonové?a""
1 |
Logistické zajištění výroby betonových směsí / Logistics assuring of concrete mixtures productionBOBEK, Stanislav January 2009 (has links)
Diploma paper is dealing with complex analysis of the information and material flows in concrete mixtures production focusing on proposals of logistic cost optimalization. The complex analysis is based on the time and direct observation in selected subject. One part of this work is dealing with optimalization of supply of production raw materials especially self supply of gravel aggregate into the each concrete mixing plant. Second part of this work is dealing with selected subject fleet optimalization. Optimalization possibilities were based on the results of the comprehensive analysis of the information and material flows.
|
2 |
Možnosti odstranění zelených řas z betonových konstrukcí / The possibilities of green algae removal from concrete structuresCochlárová, Milena January 2014 (has links)
This master´s thesis deals with the suppression of algal growth on concrete structures. The subject of the work is to design and coatings their own structural concretes containing protective element in order to inhibit the growth of algae. As the coating are tested commercially avaiable and newly created systems. Testing systems are based on the portland cement and chelates of metal (Cu, Ni, Co, Mn, Zn, Al).
|
3 |
Analýza akusticko-vibračních parametrů kolejového roštu / The analysis of acoustic and dynamic parameters of the track skeletonRatislavová, Eva January 2013 (has links)
This diploma thesis is focused on experimental measurement and acoustic and dynamic behavior analysis of railway construction with the Y – steel sleepers and their comparison with concrete sleepers. The measurements were taken in situ, in suitable sections of a railway line. These sections meet the requirements of regional railway tracks in the Czech Republic. Monitored parameters were obtained by measuring a response of testing trains and were analyzed using frequency and time analysis. Based on these evaluations, comparisons of particular constructions and their recommendations for practice were made.
|
4 |
Možnosti hodnocení trvanlivosti povrchové vrstvy betonu stavebních konstrukcí / Possibilities of evaluation durability of the surface layer of concrete structuresBlažek, Michal January 2014 (has links)
The thesis is focused on possibilities of durability evaluation of surface layer of concrete structures. The durability of concrete surface layer usually determines the durability of the structure as a unit. It has to be determined in what environment the structure is situated and what influences it has to face, to set the durability of the structure. There is a several normative prescription to set the resistance of the structure. There is formulated a summary of the most widely used and known prescriptions in the theoretical part of the thesis. It is a lot of effort to estimate the durability of the concrete by estimation of permeability of the concrete surface layer recently. Thus these methods are also formulated in the summary and there are compared the individual outputs of the tests. The permeability and pore structures of the concrete surface layer are crucial parameters for the durability of concrete structure. These parameters influence the construction properties of the concrete as well, thus the thesis is focused on relationship of the pore structure and the strength in press of the concrete.
|
5 |
Domov pro seniory / Home for the enderly peopleJureček, Jiří January 2015 (has links)
The subject of the diploma thesis is a home for the seniors in the village Nové Veselí. The building is designed on flat terrain. The main entrance is oriented to the north. It is a building with one basement and three floors. The building is designed of brickwork POROTHERM. Basement wall is made of reinforced concrete. The building is covered flat roof. House is designed for desabled persons.
|
6 |
Polyfunkční dům / Multifunctional buildingSvoboda, Tomáš January 2016 (has links)
This is a detached multifunctional building in the construction of commercial and residential buildings. The building is located in České Budějovice. Multifunctional building has five floors, one underground floor and a partial basement. The building is covered single-surface vegetation and double skin roof rack. On the first floor is a multifunctional building with reception vestibule, hall of which are accessible to all businesses and also the staircase space. The first floor is also a cafe, spatially separated from the multifunctional building. The café includes restrooms and stairs to get to the hinterland own cafe, where there is room for staff, toilet and are relevant warehouses drinks and other amenities. On the second floor there is a fitness center with all facilities and sanitary facilities. The gym also includes a reception and a health food store. In the third to fifth floor are residential units. A total of 5 apartments, where 2 and 3 flats are always identical. The building is based on foundation strips of plain concrete and masonry made of POROTHERM building system with a contact system of the company ISOVER. The project has been prepared complete documentation of new multifunctional building at the level of documentation for construction. Design of the building emphasizes the static and layout, fire safety, energy savings and safety in use. Drawing documentation was realized in ArchiCAD.
|
7 |
Domov pro seniory / Home for the ElderlyBílková, Šárka January 2016 (has links)
The subject of the diploma theses is a house for the elderly. The building is designed on flat terrain in the Přerov cadastral, Dvořákova street. The building is designed for the permanent housing of the elderly, with the possibility of using day care services. There is a 25 residential units. The building is divided into two parts, three flors are supposed to living and the rest two floors made operating part. On the first floor there is a medical surgery, and a café. The building is designed of brick construction system ceramic blocks Porotherm. Ceiling structure is made of Porotherm Ceiling. The whole building is covered with flat roof. Home of the Elderly is designed as barrier-free.
|
8 |
Mateřská škola Barevný svět / Barevný svět kindergartenŽižková, Martina January 2017 (has links)
The objective of the diploma thesis is to prepare a study of a kindergarten. The kindergarten is designed for 72 children and is located on the lot n. 899/2 in Brno, district Zebetin. The house is a single storey, free-standing with no basement. The entrance and access road is located on the north side of the property. The adjacent terrain is gently sloping. The supporting construction is designed from the Porotherm system. The building is covered with a flat roof. The operation consists of three departments, facilities for teachers, communication facilities and technical background.
|
9 |
Golf Resort / Golf ResortŠebesta, Aleš January 2015 (has links)
The proposed golf resort is situated near the village of Nevcehle in the sloping terrain. It is a brick building of concrete blocks with contact thermal insulation and with concrete floor structure. The building has two floors. House is based on plain concrete foundations. Roof is made up of metal plate-connected timber truss with metal roofing.
|
10 |
Mateřská škola v Poličce / Nursery school, PoličkaŠvandová, Michaela January 2018 (has links)
Master thesis Kindergarten in Polička is processed in the form design documentation for the construction. Two classes are designed in the building, each for 25 children, kitchen, technical background and facilities for staff. Part of the building is a large garden. It is a detached building with one floor and the part of the building with the basement. The surrounding terrain is slightly sloping. The building is made of masonry system on the concrete strip foundations. The building is insulated with contact thermal insulation system. The part of building is roofed with mono-pitched roof and the other parts are roofed with a flat roof.
|
Page generated in 0.0331 seconds