The analysis of reinforced concrete structures under blast and impact loads is an area of research that has become increasingly relevant in recent years. Complex hydrocodes are typically used for impact analyses, although single-degree-of-freedom methods have also been developed. There are a number of disadvantages associated with both methods, and the Canadian Nuclear Safety Commission (CNSC) is looking for a tool that can be used in conjunction with hydrocodes to analyze hard and soft missile impacts, with target damage ranging from flexural cracking to perforation. The VecTor programs, a suite of nonlinear finite element programs developed at the University of Toronto for the analysis of reinforced concrete structures, can potentially be developed into such tools. The analytical work done in this study serves to investigate the current impact and impulse loading analysis capabilities in VecTor2 and VecTor3, and to identify areas where work should be focused in the future.

The analysis of reinforced concrete structures under blast and impact loads is an area of research that has become increasingly relevant in recent years. Complex hydrocodes are typically used for impact analyses, although single-degree-of-freedom methods have also been developed. There are a number of disadvantages associated with both methods, and the Canadian Nuclear Safety Commission (CNSC) is looking for a tool that can be used in conjunction with hydrocodes to analyze hard and soft missile impacts, with target damage ranging from flexural cracking to perforation. The VecTor programs, a suite of nonlinear finite element programs developed at the University of Toronto for the analysis of reinforced concrete structures, can potentially be developed into such tools. The analytical work done in this study serves to investigate the current impact and impulse loading analysis capabilities in VecTor2 and VecTor3, and to identify areas where work should be focused in the future.

Polymer matrix composites (PMCs) offer several advantages compared to traditional metallic counterparts when employed in high-performance products that need to be lightweight, yet strong enough to sustain harsh loading conditions - such as aerospace components and protective structures in military applications- armours, helmets, and fabrications retrofitted to transport vehicles and bunkers. These are often subjected to highly dynamic loading conditions under blast and ballistic impacts. Severe impact energy involved in these dynamic loading events can initiate discrete damage modes in PMCs such as matrix cracking, matrix splitting, delamination, fibre-matrix debonding, fibre micro-buckling and fibre pull-out. Interaction of these damage modes can severely reduce the load carrying capacity of such structures. This needs to be understood to design structures with improved resistance to such loading.

Solid foams have been studied for years for their ability to mitigate damage from sudden impact. Small explosive attacks threaten to damage or destroy key structures in some parts of the world. A newly developed material, carbon foam, may offer the ability to mitigate the effects of such blasts. This project investigates the energy absorbing properties of carbon and polyurethane based foams in dynamic compression to illustrate their viability to protect concrete structures from the damaging effects of pressure waves from a small blast. Cellular solid mechanics fundamentals and a survey of the microscopic cellular structure of each type of foam are discussed. Experiments were performed in three strain rate regimes: low strain rate compression testing, middle strain rate impact testing, and high strain rate blast testing to reveal mechanical behavior. Experiments show a 7.62 cm (3”) thick hybrid composite layered foam sample can protect a concrete wall from a small blast.