The subject matter of this master thesis is to design pedestrian bridge across the river Nitra in a city Nitra. Out of three possible solutions arch bridge was considered to be the most optimal system for given situation and it was analysed in detail. The design and assessment of load-bearing structure was evaluated acording to valid standarts. The main goal was to comply with ultimate and serviceability limit state. Global calculation model was created in ANSYS Mechanical APDL 21 R2. Model of the slab of the deck in the cross direction was performer using SCIA Engineer 19.1. Load capacity of some cross sections was verified manually and some using computer software IDEA Statica 21.0. This thesis is extended with drawings of sequence of construction, detailed drawings of the bridge and visualizations.

This thesis describes design gallery of aviation technology and traditions at the airport in Brno Part of my thesis is focused on urban solution of area layout its interconnections with near districts “Komín“ and “Medlánky“. There is new pedestrian, cycling paths, operational and logistic roads inside the complex layout. This design supposed to keep the two existing historic hangars and demolishing remaining buildings with subsequent completion of necessary objects. Priority and the main idea is to keep compositional and visual axis to ensure visual contact with all airport operational parts to ease of orientation. According to this principle is mass and platform solved with object “gallery”. This object in addition to the exhibition space is also used for administration and operation department of the gallery. In separate part there is ensured catering in form of restaurant with associated technical, operational and sanitary facilities. The gallery is designed to visually and physically separate section used by pilots and airport vehicles from visitors to avoid dangerous situation. Other buildings I have designed in my project are “the clubhouse”, airport administration, emergency accommodation, social activity space mainly designed for aircraft-model pilots and the air traffic control tower. These objects creates border between premises restricted for aero club and visitors.

The doctoral thesis deal with the interaction between the foundation plate and deep foundation in the form of bored piles in the case of skeleton construction. The issue of tension redistribution from the column between the plate and the pile is investigated on specific object – „Shopping and entertainment center Fórum Nová Karolina”. On this object were selected columns monitored and load tests of the piles was executed. Values of the axial loading of the piles and the actual deformation of the construction have been derived from measurements and tests. They were compared with the results of structural behavior by numerical modeling.

Diploma thesis focuses on the design of selected parts of precast concrete frame construction. Elements for design are prestressed girder, purlin, column, footing pocket and drilled pile. The calculation of internal forces was performed in a computational program SCIA Engineer 18. Check of the pile was performed in program GEO 5. Part of the thesis is a technical report and formworks drawing and reinforcement drawing. The construction is designed and assessed according to ČSN EN 1992 - 1 - 1.