Composite bridges in Sweden are commonly designed as a twin I-girder section. To stablizie the bridge during launching and concreting horizontal cross bracings are used. These are normally connected to a transverse web stiffener that is welded with a throat size of 5 mm regardless of the dimensions of the bridge. During an inspection of Vårby Bridge south of Stockholm in 2006 cracks were found in this weld between the transverse web stiffener and the top flange. After discovering of these problems the Swedish Transport Administration (Trafikverket) wants the designer to present calculations for this weld. The aim of this thesis was to investigate and compare the stresses in the weld between the top flange and the transverse stiffener for different cross bracings. A finite element model of a typical composite bridge, with five different types of cross bracings, was investigated using the FE program Brigade Plus. A selection of loads including temperature-, traffic- and fatigue loads were considered. The thesis clearly shows that the design of cross bracings will affect the stress levels in the weld.

The subject of this thesis is the design and assessment of steel sports hall in the town of Krnov. The main structural material is steel S355JR. The ground plan dimensions of the object is 48,0 metres to 36,0 metres, the height of the object is 16,78 metres. There is a sport facilities unit adjusted to the construction . The dimension of such an object is 30,0 metres to 8,0 metres. The support system consists of columns and an arched trussed rafter. The axial distance of cross-links is 8,0 m. The spatial rigidity is ensured by the transverse and longitudinal bracings. The hall is founded on reinforced concrete strip footings. The perimeter and roof cladding consists of sandwich panels. In this work is processed a static calculation of structural elements including connections and drawing documentation.

Master´s thesis describes the design and check of the construction of botanical pavillion in Brno. The structure has an elliptical ground plan with dimensions 34 x 20 m, height of 9 m. The supporting structure consists of 16 support curved ribs which are braced at the top of the elliptical steel ring. Between the ribs are inserted purlins which support the perimeter cladding. The supporting structure is designed as an alternative system as girders of glued laminated timber and as system of steel truss girders.

The diploma thesis deals with the study of sports hall designated for volleyball. The volleyball hall is steel construction with arched truss with span of 30 meters. Sport`s background, roofed by mono-pitch plus saddle roof, is part of south-easterly side of the hall. The hall is situated in moderate slope terrain in cadastre unit Zbraslav na Moravě. Designed hall has rectangular plan (48 x 30 m) to this belongs also the foyer and the clubroom. Clear height of the hall is 15 m. Object consists of columnal structural system with steel columns that support arched truss. Center to center spacing of main truss is 8 m. The object is set up on reinforced concrete foundation pad. Column foot is sticked in foundation pad and column head is pinned. Roof’s and wall’s bracings provide stability of the hall. Curtain walling and roof cover is made of sandwich panels Kingspan. Insolation and daylighting is guaranteed by plastic windows set in the wall.

The subject of this diploma thesis is the design and assessment of main load-bearing elements od the steel structure of shopping gallery in Hodonín. Part of floor plan is rectangular and rest of it is half-circled. Object's dimensions are 7é m x 147,75 m (and roof overhang 1,5 m on each side), the height of the ridge is 13,43 m and the height of the roof's dome is 22,70 m. It's a two-storey building. The load-bearing structure consist of pin-suported columns, in this case there is max. 8,5 m distance between them in direction of main frame. The distance between main frames is 9 m. The spatial rigidity of the structure is ensured with floor slabs and system of bracings. The cladding consists of sandwich panels, roof's fanlights and dome of glazed areas. Most of elements are made of S355 steel.

The subject of the diploma thesis is a preparation of a prefabricated hall with administration in Prace. The production hall will be used to produce glass fiber reinforced concrete. Next part and extension is an administrative part. The text part of the thesis contains a technical report on the building technological project, time and financial plan of the building - object, coordinating situation of the building with broader relations of the transport routes, study of the realization of the main technological stages of the building object, item budget of the main building object, time schedule of the main building, sets of the main technological stages, detection protocols for individual months, limits, balance of resources and personnel, plan of selected material sources, technical report of construction site equipment, technological regulation of precast reinforced concrete frame, technological regulation of precast concrete frame coverings Kingspan panels, Control and test plan of precast concrete frame, covering of precast concrete frame panels Kingspan and ceiling panels of the Spiroll administration, alternative suggestion of the exchange ceiling construction administration and comparison, noise study and thermal technology.