The scope of the presented master thesis was the experimental study of multi-filament yarns made of AR-glass and used for textile-reinforced concrete. The behavior under the tensile loading was investigated by laboratory tests. A high number of yarn specimens (over 300) of six different lengths (from 1 cm to 74 cm) was tested to obtain statistically significant data which were subsequently corrected and statistically processed. The numerical model of the multi-filament bundle was studied and applied for prediction of the yarn performance and for later results interpretation. The model of n parallel filaments describes the behavior of a bundle with varying parameters representing different sources of disorder of the response and provides the qualitative information about the influence of their randomization on the overall bundle response. The aim of the carried experiment was to validate the model presumptions and to identify the model parameters to fit the real load-displacement curves. Unfortunately, due to unsuccessful correction of measured displacements devalued by additional non-linear contribution of the unstiff experiment device the load-displacement diagrams were not applicable to model parameters identification. The statistical evaluation was carried only for the maximal load values and the effect of the specimen size (length) on its strength was demonstrated. The size effect curve did not exclude the existence of spatial correlation of material mechanical properties modifying the classical statistical Weibull theory.

The paper presents a meso-scopic modeling framework for the simulation of three-phase composite consisting of a brittle cementitious matrix and reinforcing AR-glass yarns impregnated with epoxy resin. The construction of the model is closely related to the experimental program covering both the meso-scale test (yarn tensile test and double sided pull-out test) and the macro-scale test in the form of tensile test on the textile reinforced concrete specimen. The predictions obtained using the model are validated using a-posteriori performed experiments.

The paper presents a meso-scopic modeling framework for the simulation of three-phase composite consisting of a brittle cementitious matrix and reinforcing AR-glass yarns impregnated with epoxy resin. The construction of the model is closely related to the experimental program covering both the meso-scale test (yarn tensile test and double sided pull-out test) and the macro-scale test in the form of tensile test on the textile reinforced concrete specimen. The predictions obtained using the model are validated using a-posteriori performed experiments.