Conventional wireless techniques are becoming inadequate for beyond fifth-generation (5G) networks due to latency and bandwidth considerations. To increase the wireless network throughput and improve wireless communication systems’ error performance, we propose physical layer network coding (PNC) in an Intelligent Reflecting Surface (IRS)-assisted environment. We consider an IRS-aided butterfly network, where we propose an algorithm for obtaining the optimal IRS phases. Also, analytic expressions for the bit error rate (BER) are derived. The numerical results demonstrate that the scheme proposed in this thesis significantly enhances the BER performance. The proposed scheme is compared to traditional network coding without IRS. For instance, at a target BER of 10−3, 28 dB and 0.75 dB signal to noise ratio (SNR) gains are achieved at the relay and destination node of the 32-element IRS-assisted butterfly network model.

The aim of this thesis is to conduct performance investigation of a combined system of Network Coding (NC) technique with Ant-Colony (ACO) routing protocol. This research analyses the impact of several workload characteristics, on system performance. Network coding is a significant key development of information transmission and processing. Network coding enhances the performance of multicast by employing encoding operations at intermediate nodes. Two steps should realize while using network coding in multicast communication: determining appropriate transmission paths from source to multi-receivers and using the suitable coding scheme. Intermediate nodes would combine several packets and relay them as a single packet. Although network coding can make a network achieve the maximum multicast rate, it always brings additional overheads. It is necessary to minimize unneeded overhead by using an optimization technique. On other hand, Ant Colony Optimization can be transformed into useful technique that seeks imitate the ant’s behaviour in finding the shortest path to its destination using quantities of pheromone that is left by former ants as guidance, so by using the same concept of the communication network environment, shorter paths can be formulated. The simulation results show that the resultant system considerably improves the performance of the network, by combining Ant Colony Optimization with network coding. 25% improvement in the bandwidth consumption can be achieved in comparison with conventional routing protocols. Additionally simulation results indicate that the proposed algorithm can decrease the computation time of system by a factor of 20%.

An ever increasing demand for instant and reliable information on modern communication networks forces codewords to operate in a non-asymptotic regime. To achieve reliability for imperfect channels in this regime, codewords need to be retransmitted from receiver to the transmit buffer, aided by a fast feedback mechanism. Large occupancy of this buffer results in longer communication delays. Therefore, codewords need to be designed carefully to reduce transmit queue-length and thus the delay experienced in this buffer. We first study the consequences of physical layer decisions on the transmit buffer occupancy. We develop an analytical framework to relate physical layer channel to the transmit buffer occupancy. We compute the optimal code-rate for finite-length codewords operating over a correlated channel, under certain communication service guarantees. We show that channel memory has a significant impact on this optimal code-rate. Next, we study the delay in small ad-hoc networks. In particular, we find out what rates can be supported on a small network, when each flow has a certain end-to-end service guarantee. To this end, service guarantee at each intermediate link is characterized. These results are applied to study the potential benefits of setting up a network suitable for network coding in multicast. In particular, we quantify the gains of network coding over classic routing for service provisioned multicast communication over butterfly networks. In the wireless setting, we study the trade-off between communications gains achieved by network coding and the cost to set-up a network enabling network coding. In particular, we show existence of scenarios where one should not attempt to create a network suitable for coding. Insights obtained from these studies are applied to design a distributed rate control algorithm in a large network. This algorithm maximizes sum-utility of all flows, while satisfying per-flow end-to-end service guarantees. We introduce a notion of effective-capacity per communication link that captures the service requirements of flows sharing this link. Each link maintains a price and effective-capacity, and each flow maintains rate and dissatisfaction. Flows and links update their respective variables locally, and we show that their decisions drive the system to an optimal point. We implemented our algorithm on a network simulator and studied its convergence behavior on few networks of practical interest.