In recent years, stringent world-wide regulation of copper in drinking water, wastewater discharge and sludge has prompted utilities to carefully evaluate copper sources and sinks, benefits and detriments, and mitigation. This work compiled the individual efforts of researchers and utilities to provide a basis for holistic decision-making. Mass balances suggest that between 14-61% of copper in wastewater originates from home plumbing. Dosing of pure copper sulfate "root killer" by consumers, which is of unlikely value, accounted for up to 27% of copper inputs. Removal of copper in wastewater treatment ranged from 24-90%, suggesting a potential for optimization of these processes if desired. Finally, though utilities are pressured to reduce copper inputs at all stages of the urban water cycle, substantial benefits including human and wastewater bacteria micro-nutrition, water disinfection and algae control should not be overshadowed. To better understand copper inputs from corrosion in soft waters, a 12 month study was executed. Free chlorine (0.7 mg/L) was determined to have minimally adverse effects on copper release at pH 9.5 but no significant effect at pH 7.0, and higher temperatures usually increased copper release. Organic matter including soluble and particulate NOM, sodium alginate, and gum xanthan, tended to worsen copper release. Their direct effects included complexation and mobilization of pre-existing copper scale as particulates. Indirect effects were also discovered, including a propensity of gum xanthan and alginate to decrease pH, increasing copper release, and also to produce a microbiologically unstable water, decreasing the dissolved oxygen necessary for fueling corrosion reactions. The range of organic matter effects could be placed within a unified conceptual framework. / Master of Science

When severe copper pitting problems impacted customers at a large utility, studies were begun to attempt to diagnose the problem and identify potential solutions. A series of tests were conducted to characterize the nature of pitting. Desktop comparisons of pinhole leak frequency and treatment practices at nearly utilities were also documented to identify treatment factors that might be influencing the initiation and propagation of leaks. Factors identified included the presence of relatively high levels of free chlorine and aluminum in the distribution system. Experiments were conducted to examine the effect of these constituents on copper pitting under stagnant and flow conditions. That led to discovery of a synergistic redox reaction between chlorine, aluminum solids, and copper metal as evidenced by increased chlorine decay rates, non-uniform corrosion, and rising corrosion potentials. Temperature changes had been suspected to increase copper pitting frequency and copper release to drinking water. Experiments examined the effect of temperature gradients on copper pipe corrosion during stagnant conditions. The pipe orientation in relation to the temperature gradient determined whether convective mixing would occur, which influenced temperature gradients within the pipe. This work is the first to demonstrate that temperature gradients lead to thermogalvanic currents, influences copper leaching and scale type. Iron release from corroding water mains is another concern of many water utilities, but little is known about chemistry factors that influence the problem. In laboratory experiments, higher levels of silica caused more iron release to the water and decreased the size of suspended iron particles. Silica levels also changed during the experiment: it decreased through incorporation into a dense scale, and increased by release from cast iron during corrosion. Silica slightly decreased iron corrosion rates near the end of this 6-month test. / Master of Science