1 |
Reactions of sulfur atoms produced by the ³⁵Cl(n, p)³⁵ S process in potassium chloride and by photolysis of carbonyl sulfideGiulianelli, James. January 1969 (has links)
Thesis (Ph. D.)--University of Wisconsin--Madison, 1969. / Typescript. Vita. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references.
|
2 |
Carbonyl sulphide as a fumigant for grain and timber : efficacy towards organisms and formation of residuesRen, YongLin, n/a January 1997 (has links)
This thesis presents an investigation of carbonyl sulphide as a new fumigant
and related methodology studies. The first part involved the investigation of a new
fumigant - carbonyl sulphide, which has the potential to replace methyl bromide.
Its biological response or activity was investigated, e.g. toxicity to target organisms
and phytotoxicity, environmental and worker safety considerations. In the second
investigation, analytical methods were developed for the determination of fumigant
movement through timber and fumigant residues in grains as well as a method of
chemical fractionation to determine the fate of carbonyl sulphide. A comprehensive
literature review of 161 references in these two areas is reported.
Carbonyl sulphide was highly toxic to adults of three coleopteran species
tested, namely Rhyzopertha dominica (F.), Tribolium confusum du Val, and
Sitophilus oryzae (L.), the most sensitive species was R. dominica. For 6 hr
exposure at 25�C, the L(CxT)95 value for R. dominica, S. oryzae and T. confusum
were, respectively, 36.48, 99.82 and 113.0mg h L-1. Carbonyl sulphide inhibited
100% of mould in wet wheat and more than 90% of mould on dry wheat at lOOmg
L-1. Both carbonyl sulphide and hydrogen cyanide were low in phytotoxicity
without affecting germination of wheat, at levels needed to control insects. Unlike
hydrogen cyanide, carbonyl sulphide can be used at minimum levels without
decreasing plumule length of wheat.
Chemical data on the sorption of carbonyl sulphide are compared with data
from methyl bromide. The levels of carbonyl sulphide in the headspace of five
commodities (wheat, barley, paddy, sorghum and peanut) and timbers (hardwood
and softwood) decay more slowly than do levels of methyl bromide. Carbonyl
sulphide was blown through a column of wheat as easily as was phosphine and
more easily than was methyl bromide, and its front was blown out faster than
phosphine and methyl bromide. Movement of two fumigants (methyl bromide and
carbonyl sulphide) through, and sorption on, softwood and hardwood were studied.
Each fumigant was sorbed less on softwood than on hardwood and penetrated
softwood better than hardwood. Carbonyl sulphide penetrated timber better than
did methyl bromide, and was less sorbed on timber. A rapid method of solvent
extraction was developed to enable rapid estimation of the amount on intact
fumigant sorbed in wood. This procedure enabled near quantitative recovery of
methyl bromide as either intact fumigant or as bromide ion.
Carbonyl sulphide residue in unfumigated wheat was found to be around 25-
SOppb. Carbonyl sulphide left little residue on fumigated grains. Desorption of
carbonyl sulphide from the wheat was extremely fast, 85% of it was released after
one day aeration which was very much greater than that of methyl bromide and
carbon disulphide. After 6 days aeration the incorporation of 14COS on mungbean,
wheat, paddy, rice and safflower was lower than 7Oppb (calculated as COS
equivalent). Food value or nutritional quality of foodstuffs is not harmed by
carbonyl sulphide fumigation. This result was assessed by identifying any nonreversible
change or combined residues in biochemical fractions of commodities
including lipids, protein, amino acids, carbohydrate, etc., and no irreversible
reaction between carbonyl sulphide and any constituent such as B vitamin, atocopherol,
lysine, maltose and starch. Fumigants did not affect lipids, although
each fumigant was applied to wheat at exaggerated concentrations, nor wheat germ
oil and canola oil treated with extremely high concentration of fumigants.
Factors which affect analysis of fumigants including stability of chemicals
in extraction solvent and partitioning of fumigant between solvent and air, were
examined. The partition ratio, defined as the fumigant concentration in extraction
solvent to that in the headspace, varied with fumigant. Methods for multi-fumigant
analysis were developed or modified and gave high recoveries and efficiency. The
procedure of Daft of solvent extraction followed by partitioning was modified by
being performed in sealed flasks. This raised the recovery of carbonyl sulphide,
methyl bromide, phosphine and carbon disulphide. Recoveries were near
quantitative at levels down to 6-16ppb (w/w) for tested fumigants. Thus the
modified Daft method can be adapted to enable determination of the main fumigants
used on staple foodstuffs. Microwave irradiation method give higher efficiency of
removal of fumigants from grains. Limits of quantification were < 0.2ng g-1 (ppb
w/w) for each tested fumigant. The detection limit of COS was calculated, as
natural levels of the fumigant were detected in commodities. These are feasible,
simple and rapid (< 2 min.) to be use to analyse fumigant residue in grains.
Carbonyl sulphide has potential as a fumigant for grain and timber and may
replace methyl bromide in some uses, subject to further investigation in commercial
situations.
|
3 |
Rotational absorption spectrum of OCSJanuary 1948 (has links)
M.W.P. Strandberg, T. Wentink, Jr. [and] R.L. Kyhl. / "May 13, 1948." / Bibliography: p. 17. / Army Signal Corps Contract W-36-039 sc-32037.
|
4 |
The infrared absorption spectra of carbonyl sulphide and deuterium cyanideBartunek, Paul F., Barker, Ernest F. January 1900 (has links)
Thesis (Ph. D.)--University of Michigan, 1935. / Cover title. By Paul F. Bartunek and E.F. Barker. "Reprinted from the Physical review, vol. 48, no. 6, September 15, 1935."
|
Page generated in 0.0445 seconds