The subject of this thesis is to create a project documentation of the design of a new office building construction in Fulnek – Jerlochovice. The building is located between residential and industrial zone. It has three aboveground levels. There is a technical backgroud, toilets, archive, rest zone for employees and two openspace offices located on the ground floor. The second floor is designed on the same basis. There are two openspace offices situated on the west side, background for company managment, toilets and day room with kitchen. The third floor is designed as conference room with kitchen and toilets. Construction system is cast-in-place concrete frame. The building is roofed with the flat roof. Foundations are made of one-stage concrete footing.

The subject of this diploma thesis is the desing and development of project documentation for the construction of a new building of the multifunctional house Rozkošská. Object will be located in the city of Hlavlíčkův Brod in part Rozkoš. The new biulding will be divided in to commercial space in ground floor, office space in second floor and residental area in third floor. It is three-storey multifuncional house with a warm flat roof with a typical sequence of layers based on foundation pads. The structural system is desinged reinforced concrete frame. The diploma thesis is processed with the valid standards, laws and decreens of the Czech Republic in the current version.

The purpose of the thesis is the processing of project documentation fot the construction design of the Mixed-use building in the city of Brno, a borough of Židenice. Underground and first floor are made of cast-in-place concrete. The vertical load-bearing structures of the second, third and fourth floor are designed from ceramic bricks of 300 mm thickness. Floor slabs in the whole building are made of cast-in-place concrete. The last floor has warm flat green roof. The building is designed so that the underground floor is largely made up of underground garages, oriented to the west. Basement of the building is used for technical background of the building too. The first and second above-ground floors are intended primarily fot trade and services, where the all kinds of the offices of the first two above-ground floors makes up to 75% of the floor area. The third and fourth floors are used for housing. The building is oriented from east to west.

Master´s thesis premises designed Health centre Sadová on the level of documentary for execution of works. The building has thirteen medical equipment with facilities, pharmacy, health food store, optics and refreshment. The building is simply-shaped, with four above-ground floors and basement. The structural systém is cast-in-place concrete frame. The infill wall in basement is walled with permanent formwork blocks and the ground floors are walled with clay blocks. Floor structures are cast-in-place reinforced concrete. Roof structure is designed like flat roof. The building has thermal insulation and cladding with fibre cement board.

The aim of the project is a new construction of an equestrian center in the cadastral area Kuřim, South Moravian Region. It is designed for the public. The building has two aboveground floors. In the object there is stable, a riding hall with handy storages that are separate from the public. Another part is divided into facilities for riders, restaurant and accommodation. The second floor has a café, shop and offices. The hall is designed as a reinforced concrete frame, the other parts of the brick system Porotherm. The roof is pitched. The cladding is designed as a ventilated facade.

The topic of this thesis is the processing documentation of a fitness center with another establishment of wellness and coffehouse. Building is situated on a sloping terrain in Odry. It's a public services. The building has two above-ground floors and one basement. The loadbearing structure is of cast-in-place concrete frame. The building is insulated by contact insulating system ETICS. Roofing is of flat roof. On the land is designed park with 15 spaces directly accessible from the driveway.

The aim of the final thesis is design of boarding house and horse stables. The boarding house has two floors, partial basement and exploited attic. The building is designed as rectangle and will serve as support area for guests´accommodation. The building has saddle roof. The main material of vertical and horizontal structures is cast-in-place concrete using formwok VELOX. The second building is horse stables. The building has two floors, partial basement and partial exploited attic for storing fodder. The L-shaped building will serve as stable for eleven horses, storage of fodder and garage for agricultural equipment. The building has saddle roof with truss girders. The main material of vertical and horizontal structures is cast-in-place concrete using formwok VELOX. These buildings are designed on slightly sloping terrain from east to west.

My diploma thesis deals with project a multifunctional building. My project corresponds to the scope of documentation for the execution of construction. Building hat five floor and construction roof is green roof, single-layer flat roof. Construction systém is cast-in-place concrete frame. In basement is technical facilities and parking place. In ground floor is shop place and parking floor. In first floor is office place. In third and fourth floor are flats. Building foundations are bored cast in place pile – method CFA.

The subject of this diploma thesis is design documentation for implementation of the construction applied on the newly-built polyclinic in Rousínov. The polyclinic is the detached one, placed in the flat building plot with adjacent parking lot. The whole building is solving continuity on the surrounding local roads and dispersion areas. Basement of this building serves primarily as technical facilities for properly working on this new building. For example it’s about storages, utility room, boiling room, mechanical room etc. The first above-ground floor, where is situated entrance in to the building, from the southeast, is placed pharmacy, medical transport service and the first one doctor’s surgery. In the other above-ground floors are placed another doctor’s surgeries every with different specialization and in the last floor is a section for managers of polyclinic. The building is designed as a cast-in-place concrete frame with infill walls from aerated concrete. This building is based on plain concrete foundation pads and in the middle of span is shear core. Horizontal structures are solved by point-supported slabs with periphery beam and roofing is solved by warm flat roof. Whole building is insulated with contact thermal insulation from non-flammable material.

This thesis describes a design of a travel agency headquarters building. It is a four storey building without a basement made of longitudinal cast-in-place concrete frame system. The building is roofed with non-walkable flat roof and two terraces. Two flats are located in the facility in addition to offices, a café, a shop, a tour saleroom, a small storage, a departure waiting room and other facilities providing quality operation of a travel agency. The land on which the building is located is designed as a car park and parking areas for smooth departure of the travel agency clients.