This project was aimed to use a purple non-sulphur bacterium, Rhodopseudomonas palustris, as a biocatalyst for hydrogen production, from the waste of biodiesel manufacturing, crude glycerol. The goal of this project was to understand the fundamentals relevant to scaling up the process and developing an off the shelf product. The first objective was to determine the ability of R. palustris to generate hydrogen by non-growing cells in comparison to that by growing cells. Similar average hydrogen production rates and energy conversion were found for both processes but a significant difference in the hydrogen yield was observed. Hydrogen production reached ~ 80 % of the theoretical maximum hydrogen yield by non-growing R. palustris, about eight-fold of that reached by growing R. palustris. The high yield suggested that it is economically appealing to use non-growing R. palustris as the biocatalyst for continuous hydrogen production. To accomplish the proposed scale-up systems, understanding its product formation kinetics is the key. It was found that the hydrogen production rate is not growth-associated and depends solely on the dry cell mass with a non-growth associated coefficient of 2.52 (Leudeking–Piret model dP/dt=2.52 X). Light is vital for hydrogen production by non-growing R. palustris, in terms of light intensity and wavelength range. It was found that excessive or insufficient light intensity may constrain the performance. Only photons of light with appropriate wavelengths can excite cytochrome bacteriochlorophyll complexes II in R. palustris to generate hydrogen. Among white LEDs, infrared LEDs, and incandescent light bulbs, at the same light intensity, infrared LEDs gave the best results in the H2 production rate and energy conversion by non-growing cells, 22.0 % ± 1.5 % higher than that with white LEDs and around 25-30 times of that by incandescent light bulbs. It was found that non-growing R. palustris can be immobilised in alginate beads to give similar H2 production rates as that by cells suspended in media. This preliminary result pointed the direction of developing an off the shelf product of immobilised non-growing R. palustris as a biocatalyst for continuous hydrogen production.

The engineering of bacterial surfaces has in recent yearsattracted a lot of attention with applications in manydifferent areas of bioscience. Here we describe the use of twodifferent surface display systems for the gram-positivebacteria Staphylococcus carnosus and Staphylococcus xylosus invarious biotechnological applications. Environmental microbiology currently attracts a lot ofattention since genetically engineered plants and bacteriamight be used as bioadsorbents for sequestration of toxicmetals. Bacterial surface display of metal-binding peptidesmight enable recycling of the biomass by desorption ofaccumulated heavymetals. In an attempt to recruitstaphylococcal display systems for bioremediation purposes,polyhistidyl peptides were successfullly displayed on thesurface of recombinant S. carnosus and S. xylosus cells.Whole-cell Ni2+-binding assays demonstrated that therecombinant cells had gained metal-binding capacity compared towild-type cells. Tailor-made, metal-binding staphylococci was created using apreviously constructed phage-display combinatorial proteinlibrary based on a fungal cellulose-binding domain (CBD)derived from the cellobiohydrolase Cel7A of Trichoderma reseii.Novel metal-binding CBDs were generated through a phagemediated selection procedure. Selected CBD variants, now devoidof cellulose binding, were randomly selected and sequenceanalysis of selected variants revealed a marked preference forhistidine residues at the randomized positions. Surface displayof these novel CBD variants resulted in recombinantstaphylococci with increased metal-binding capacity compared tocontrol strains, indicating that this could become a generalstrategy to engineer bacteria for improved binding to specificmetal ions. Directed immobilization of cells with surface displayedheterologous proteins have widespread use in modernbiotechnology. Among other things they could provide aconvenient way of generating biofilters, biocatalysts orwhole-cell diagnostic devices. It was therefore investigatedwhether directed immobilization of recombinant staphylococci oncotton fibers could be achieved by functional display of afungal cellulose-binding domain (CBD). Recombinant S. carnosuscells with surface anchored CBDs from Trichoderma reseii Cel6Awere found to efficiently bind to cotton fibers creating almosta monolayer on the fibrous support. The co-expression of thisCBD together with previously described metal-binding proteinson the surface of our staphylococci would create means fordeveloping effective bioadsorbents for remediationpurposes. The original plasmid vector, designed for heterologoussurface display on recombinant S. carnosus cells has exhibitedproblems related to structural instability, possibly due to thepresence of a phage f1 origin of replication in the vectorsequence. This would be a problem if using the vector systemfor library display applications. Therefore, novel surfacedisplay vectors, lacking the phage ori were constructed andevaluated by enzymatic and flow cytometric whole-cell assays.One such novel vector, pSCXm, exhibited dramatically increasedplasmid stability with the retained high surface density ofexpressed heterologous proteins characteristic for the originalS. carnosus display vector, thus making it potentially moresuitable for library display applications. The successful engineering of our staphylococcal displaysystem encouraged us to further evaluate the potential to usethe staphylococcal system for display of combinatorial proteinlibraries and subsequent affinity based selections using flowcytometric cell sorting. A model system of recombinant S.carnosus cells with surface displayed engineered protein Adomains was constructed. It was demonstrated that target cellscould be sorted essentially quantitatively from a moderateexcess of background cells in a single sorting-step.Furthermore, the possibility of using staphylococcal surfacedisplay and flow cytometric cell sorting also for specificenrichment of very rare target cells by multiple rounds ofcell-sorting and in between amplification was demonstrated. <b>Key words:</b>affibody, albumin binding protein, bacterialsurface display, cell immobilization, bioremediation,combinatorial protein engineering, flow cytometry,Gram-positive, metal binding, staphylococcal protein A,Staphylococcus carnosus, Staphylococcus xylosus, whole-celldevices

<p>The engineering of bacterial surfaces has in recent yearsattracted a lot of attention with applications in manydifferent areas of bioscience. Here we describe the use of twodifferent surface display systems for the gram-positivebacteria Staphylococcus carnosus and Staphylococcus xylosus invarious biotechnological applications.</p><p>Environmental microbiology currently attracts a lot ofattention since genetically engineered plants and bacteriamight be used as bioadsorbents for sequestration of toxicmetals. Bacterial surface display of metal-binding peptidesmight enable recycling of the biomass by desorption ofaccumulated heavymetals. In an attempt to recruitstaphylococcal display systems for bioremediation purposes,polyhistidyl peptides were successfullly displayed on thesurface of recombinant S. carnosus and S. xylosus cells.Whole-cell Ni2+-binding assays demonstrated that therecombinant cells had gained metal-binding capacity compared towild-type cells.</p><p>Tailor-made, metal-binding staphylococci was created using apreviously constructed phage-display combinatorial proteinlibrary based on a fungal cellulose-binding domain (CBD)derived from the cellobiohydrolase Cel7A of Trichoderma reseii.Novel metal-binding CBDs were generated through a phagemediated selection procedure. Selected CBD variants, now devoidof cellulose binding, were randomly selected and sequenceanalysis of selected variants revealed a marked preference forhistidine residues at the randomized positions. Surface displayof these novel CBD variants resulted in recombinantstaphylococci with increased metal-binding capacity compared tocontrol strains, indicating that this could become a generalstrategy to engineer bacteria for improved binding to specificmetal ions.</p><p>Directed immobilization of cells with surface displayedheterologous proteins have widespread use in modernbiotechnology. Among other things they could provide aconvenient way of generating biofilters, biocatalysts orwhole-cell diagnostic devices. It was therefore investigatedwhether directed immobilization of recombinant staphylococci oncotton fibers could be achieved by functional display of afungal cellulose-binding domain (CBD). Recombinant S. carnosuscells with surface anchored CBDs from Trichoderma reseii Cel6Awere found to efficiently bind to cotton fibers creating almosta monolayer on the fibrous support. The co-expression of thisCBD together with previously described metal-binding proteinson the surface of our staphylococci would create means fordeveloping effective bioadsorbents for remediationpurposes.</p><p>The original plasmid vector, designed for heterologoussurface display on recombinant S. carnosus cells has exhibitedproblems related to structural instability, possibly due to thepresence of a phage f1 origin of replication in the vectorsequence. This would be a problem if using the vector systemfor library display applications. Therefore, novel surfacedisplay vectors, lacking the phage ori were constructed andevaluated by enzymatic and flow cytometric whole-cell assays.One such novel vector, pSCXm, exhibited dramatically increasedplasmid stability with the retained high surface density ofexpressed heterologous proteins characteristic for the originalS. carnosus display vector, thus making it potentially moresuitable for library display applications.</p><p>The successful engineering of our staphylococcal displaysystem encouraged us to further evaluate the potential to usethe staphylococcal system for display of combinatorial proteinlibraries and subsequent affinity based selections using flowcytometric cell sorting. A model system of recombinant S.carnosus cells with surface displayed engineered protein Adomains was constructed. It was demonstrated that target cellscould be sorted essentially quantitatively from a moderateexcess of background cells in a single sorting-step.Furthermore, the possibility of using staphylococcal surfacedisplay and flow cytometric cell sorting also for specificenrichment of very rare target cells by multiple rounds ofcell-sorting and in between amplification was demonstrated.</p><p><b>Key words:</b>affibody, albumin binding protein, bacterialsurface display, cell immobilization, bioremediation,combinatorial protein engineering, flow cytometry,Gram-positive, metal binding, staphylococcal protein A,Staphylococcus carnosus, Staphylococcus xylosus, whole-celldevices</p>