<p dir="ltr">The separation of tellurium from cadmium telluride is examined using a unique combination of mild, anhydrous chlorination and complexation of the subsequent tellurium tetrachloride with 3,5-di-<i>tert</i>-butylcatechol. The resulting tellurium complex, Te(dtbc)₂, is isolated in moderate yield and features a 10³ to 10⁴ reduction in cadmium content, as provided by XRF and ICP-MS analysis. Similar results were obtained from zinc telluride. A significant separation between Te, Se, and S was observed after treating a complex mixture of metal chalcogenides with this protocol. These three tunable steps can be applied for future applications of CdTe photovoltaic waste.</p><p dir="ltr">We report the synthesis and characterization of the first series of tellurium and selenium complexes featuring an η⁵-cyclopentadienyl ligand. Reaction of Ph₃TeX (X = Cl, S₂CNEt₂) with MCp^R (M = Li, K; R = H, Me₄, Me₅) results in high yields of [Cp][TePh₃] (<b>1</b>), [Cp^Me4][TePh₃] (<b>2</b>), and [Cp*][TePh₃] (<b>3</b>), respectively. Similarly, reaction of Ph₃SeCl with LiCp and KCp* furnishes [Cp][SePh₃] (<b>4</b>) and [Cp*][SePh₃] (<b>5</b>). Each was characterized by X-ray crystallography, revealing similar η⁵-coordination with little distortion from an idealized half-sandwich geometry, presumably from the remaining lone pair on tellurium and selenium. The Te–centroid distances are relatively long (<b>1</b>: 2.770(3), <b>2</b>: 2.746(1), and <b>3</b>: 2.733(1) Å), suggesting a mostly ionic interaction. Se–centroid distances (<b>4</b>: 2.748(3), <b>5</b>: 2.707(2), 2.730(2) Å) were found to be surprisingly similar despite its smaller atomic radius. Compounds <b>2</b>, <b>3</b>, and <b>5</b> display rapid decomposition at room temperature, extruding a phenylated cyclopentadiene and the and the respective diphenylchalcogenide. The nature of bonding within these complexes was investigated through DFT methods and found to be primarily ionic in nature.</p><p dir="ltr">Synthesis of homoleptic zirconium and hafnium dithiocarbamate via carbon disulfide insertion into zirconium and hafnium amides were investigated for their utility as soluble molecular precursors for chalcogenide perovskites and binary metal sulfides. Treating M(NEtR)₄ (M= Zr, Hf and R= Me, Et) with CS₂ resulted in quantitative yields of homoleptic Group IV dithiocarbamates. Zr(k²-S₂CNMeEt) (<b>1</b>), Zr(k²-S₂CNEt₂)₄ (<b>2</b>), and Hf(k²-S₂CNEt₂)₄(<b>4</b>), a rare example of a crystal of a homoleptic hafnium CS₂ inserted amide species, were characterized. A computational analysis confirmed assignments for IR spectroscopy.<b> </b>To exemplify the utility of the Group IV dithiocarbamates, a solution-phase nanoparticle synthesis was performed to obtain ZrS₃ via the thermal decomposition of Zr(S₂CNMeEt)₄</p><p dir="ltr">Chalcogenide perovskites have garnered interest for applications in semiconductor devices due to their excellent predicted optoelectronic properties and stability. However, high synthesis temperatures have historically made these materials incompatible with the creation of photovoltaic devices. Here, we demonstrate the solution processed synthesis of luminescent BaZrS₃ and BaHfS₃ chalcogenide perovskite films using single-phase molecular precursors at sulfurization temperatures of 575 °C and sulfurization times as short as one hour. These molecular precursor inks were synthesized using known carbon disulfide insertion chemistry to create Group 4 metal dithiocarbamates, and this chemistry was extended to create species, such as barium dithiocarboxylates, that have never been reported before. These findings, with added future research, have the potential to yield fully solution processed thin films of chalcogenide perovskites for various optoelectronic applications.</p><p dir="ltr">Np(IV) Lewis base adducts were prepared by ligand substitution of NpCl₄(DME)₂. Using acetonitrile and pyridine, NpCl₄(MeCN)₄ (<b>1</b>) and NpCl₄(pyr)₄ (<b>2</b>), were isolated, respectively. All species were fully characterized using spectroscopic and structural analyses.</p>

<p dir="ltr">For reliable, facile, and user-friendly, solution-based synthesis of materials, the colloidal nanocrystal route has proven to be the method of choice for so many. The tunability that this process renders its users---from choice of precursors, solvent systems, and reaction conditions including temperature, pressure, and precursor addition order---is truly second to none. In their simplest form, these nanomaterials are usually comprised of an inorganic core of the desired material and an outer layer of surface-stabilizing molecules called ligands. These ligands provide colloidal stability and allow for the solution-processing of these materials for downstream usage in devices such as light-emitting diodes and photovoltaics, for example. In this thesis, the study and use of colloidal nanomaterials of Cu(In,Ga)(S,Se)₂ (CIGSSe), IIA-IVB-S₃ (including BaZrS₃ and SrZrS₃), alkaline earth polysulfides (IIAS_x; IIA = Sr, Ba; x = 2, 3), and other materials like Cu₂GeS₃ and Cu₂BaSnS₄, for studies into the formation, colloidal stability, and fabrication into solar cells was performed.</p><p dir="ltr">More specifically, an experimental protocol was developed to fabricate high-quality CIGSSe nanoparticles with carbonaceous residues that are substantially reduced from traditional pathways. Traditional methods for synthesizing colloidal CIGS NPs often utilize heavy, long-chain organic species to serve as surface ligands which, during annealing in a Se/Ar atmosphere, leave behind an undesirable carbonaceous residue in the film. In an effort to minimize these residues, N-methyl-2-pyrrolidone (NMP) was used as an alternative surface ligand. Through the use of the NMP-based synthesis, a substantial reduction in the number of carbonaceous residues was observed in selenized films. Additionally, the fine-grain layer at the bottom of the film, a common observation of solution-processed films from organic media, was observed to exhibit a larger average grain size and increased chalcopyrite character over those of traditionally prepared films, presumably as a result of the reduced carbon content, allowing for superior growth. As a result, a gallium-free CuIn(S,Se)₂ device was shown to achieve power-conversion efficiencies of over 11% as well as possessing exceptional carrier generation capabilities with a short-circuit current density (J_SC) of 41.6 mA/cm², which is among the highest for the CIGSSe family of devices fabricated from solution-processed methods. It was shown that pre-selenized films of sulfide nanoparticles instead of selenide nanoparticles performed better as solar cells. While the exact mechanism is still under debate, it appears that the growth phase during selenization, which varies depending on the chalcogen present in the starting material plays an important role.</p><p dir="ltr">The IIA-IVB-S₃ system is just beginning to emerge as a material system shown to be capable of solution-based synthesis methods. This is primarily due to the extremely high oxophilicity of the IVB elements, Ti, Zr, and Hf, necessitating that extreme care and judicial use of inert environments be used to synthesize these materials via solution-based methods. In the IIA-IVB-S₃ system exists some of the chalcogenide perovskites, including BaZrS₃, which are expected to have similar electronic properties to the well-known, high-performing halide perovskites, albeit much more stable, making them attractive prospects as novel semiconductor materials for optoelectronic applications. This work builds upon recent studies to show a general synthesis protocol, involving the use of carbon disulfide insertion chemistry to generate highly reactive precursors, that can be used towards the colloidal synthesis of numerous nanomaterials in the IIA-IVB-S₃ system, including BaTiS₃, BaZrS₃, BaHfS₃, α-SrZrS₃ and α-SrHfS₃. Additionally, we establish a method to reliably control the formation of the BaZrS₃ perovskite, a complication seen in previous literature where BaZrS₃ appears to exist as two different phases when synthesized via colloidal methods. The utility of these nanomaterials is also assessed via the measurement of their absorption properties and in the form of highly stable colloidal inks for the fabrication of homogenous, crack-free thin films of BaZrS₃. In addition to the chalcogenide perovskites, the IIA-S system was also explored to better understand the solution-based formation of these materials and how the control of IIA polysulfides can be achieved. We show that the synthesis of these materials is strongly correlated to the reaction temperature and that the length of the S_n^2- oligomer chain is the dependent variable. We also report on the synthesis of a previously unreported polymorph of SrS₂ which appears to take on the <i>C2/c</i> space group, the same as BaS₂.</p><p dir="ltr">Finally, some discussion is also provided on the use of transmission electron microscopy (TEM) to analyze the crystal structure of materials. Some tips and techniques used throughout this thesis are summarized in this section.</p>