FundaÃÃo de Amparo à Pesquisa do Estado do Cearà / Atualmente a internet à uma ferramenta largamente utilizada e o grande desenvolvimentoe popularidade de tecnologias de acesso sem-fio (wireless) nos levam a um futuro no qual uma conexÃo caracterizada por estar disponÃvel âanytime, anywhereâ, ou seja, a qualquer hora e em qualquer lugar, serà essencial. Tal caracterÃstica à considerada obrigatÃria em sistemas4G (quarta geraÃÃo), mas para uma experiÃncia satisfatÃria para o usuÃrio à necessÃrio que uma conexÃo segura e eficiente esteja disponÃvel. A fim de obter tal eficiÃncia, a comunidade de pesquisa tem gerado algumas soluÃÃes promissoras que obtÃm ganhos significativos no desempenho do sistema, tais como modulaÃÃo e codificaÃÃo adaptativas, codificaÃÃo espaÃo-temporal, mÃltiplas antenas e canais MIMO (Multiple Input Multiple Output ), modulaÃÃo multiportadora, detecÃÃo multiusuÃrio, etc. [1]. Dentre essas soluÃÃes, destaca-se a adaptaÃÃo do sistema, ou seja, o sistema deve estar em constante adaptaÃÃo para obter sempre o melhor desempenho possÃvel para cada situaÃÃo em que se encontra. No entanto, uma importante premissa para a adaptaÃÃo do sistema consiste em conhecer o estado atual em que o sistema se encontra (informaÃÃo sobre o canal de comunicaÃÃo). Para isso diversas tÃcnicas de estimaÃÃo de canal sÃo propostas na literatura, cada uma possuindo vantagens e desvantagens. Nesse trabalho o impacto da estimaÃÃo de canal na adaptaÃÃo de enlace à analisado atravÃs de simulaÃÃes computacionais1. Em particular, duas tÃcnicas de estimaÃÃo de canal com caracterÃsticas diferentes sÃo analisadas, para alguns cenÃrios especÃficos em um sistema MIMO-OFDM (Multiple Input Multiple Output - Orthogonal Frequency Division Multiplexing ), atravÃs de uma mÃtrica que considera tanto a redundÃncia introduzida para estimar o canal quanto o erro de estimaÃÃo de canal de cada tÃcnica. Os resultados encontrados constituem curvas que podem ser utilizadas para efetuar a adaptaÃÃo de enlace do sistema de maneira mais realista, ou seja, considerando o efeito da estimaÃÃo de canal, alÃm de incluir a prÃpria tÃcnica de estimaÃÃo de canal como um parÃmetro a ser adaptado. / Atualmente a internet à uma ferramenta largamente utilizada e o grande desenvolvimentoe popularidade de tecnologias de acesso sem-fio (wireless) nos levam a um futuro no qual uma conexÃo caracterizada por estar disponÃvel âanytime, anywhereâ, ou seja, a qualquer hora e em qualquer lugar, serà essencial. Tal caracterÃstica à considerada obrigatÃria em sistemas4G (quarta geraÃÃo), mas para uma experiÃncia satisfatÃria para o usuÃrio à necessÃrio que uma conexÃo segura e eficiente esteja disponÃvel. A fim de obter tal eficiÃncia, a comunidade de pesquisa tem gerado algumas soluÃÃes promissoras que obtÃm ganhos significativos no desempenho do sistema, tais como modulaÃÃo e codificaÃÃo adaptativas, codificaÃÃo espaÃo-temporal, mÃltiplas antenas e canais MIMO (Multiple Input Multiple Output ), modulaÃÃo multiportadora, detecÃÃo multiusuÃrio, etc. [1]. Dentre essas soluÃÃes, destaca-se a adaptaÃÃo do sistema, ou seja, o sistema deve estar em constante adaptaÃÃo para obter sempre o melhor desempenho possÃvel para cada situaÃÃo em que se encontra. No entanto, uma importante premissa para a adaptaÃÃo do sistema consiste em conhecer o estado atual em que o sistema se encontra (informaÃÃo sobre o canal de comunicaÃÃo). Para isso diversas tÃcnicas de estimaÃÃo de canal sÃo propostas na literatura, cada uma possuindo vantagens e desvantagens. Nesse trabalho o impacto da estimaÃÃo de canal na adaptaÃÃo de enlace à analisado atravÃs de simulaÃÃes computacionais1. Em particular, duas tÃcnicas de estimaÃÃo de canal com caracterÃsticas diferentes sÃo analisadas, para alguns cenÃrios especÃficos em um sistema MIMO-OFDM (Multiple Input Multiple Output - Orthogonal Frequency Division Multiplexing ), atravÃs de uma mÃtrica que considera tanto a redundÃncia introduzida para estimar o canal quanto o erro de estimaÃÃo de canal de cada tÃcnica. Os resultados encontrados constituem curvas que podem ser utilizadas para efetuar a adaptaÃÃo de enlace do sistema de maneira mais realista, ou seja, considerando o efeito da estimaÃÃo de canal, alÃm de incluir a prÃpria tÃcnica de estimaÃÃo de canal como um parÃmetro a ser adaptado. / Nowadays the internet is a widely used tool and the great development and popularity of wireless technologies leads us to a future where the connectivity will be characterized as âanywhere, anytimeâ. Such characteristic is considered essential in 4G systems. However, for a satisfactory user experience a secure and efficient connectivity has to be always available. To obtain such efficiency, the research community has generated a number of promising solutions that achieve significative improvements in system performance, such as adaptive modulation and coding, space-time coding, multiple antennas and MIMO (Multiple Input Multiple Output ) channels, multicarrier modulation, multiuser detection, etc. [1]. Among these solutions, the system adaptation is a particularly interesting one, there is, the system must constantly adapt itself to achieve the best performance for each situation. However, one important premise for the system adaptation is the knowledge of the channel state information (CSI). To obtain this knowledge, several channel estimation strategies were proposed in the literature, each one with advantages and disadvantages. In this work we analyze the impact of channel estimation in the link adaptation through computer simulations1. Two channel estimation techniques with different characteristics were analyzed for some specific scenarios in a MIMO-OFDM (Multiple Input Multiple Output - Orthogonal Frequency Division Multiplexing ) system. To perform the analysis it was used a metric that consider the redundancy introduced to estimate the channel and the channel estimation error of each technique. The obtained results constitute curves that can be used to perform link adaptation in a more realistic way, that is, considering the effect of channel estimation. Besides, it is shown that even the choice of the channel estimation strategy can be an adaptable parameter so that the most adequate channel estimation strategy for each system state is used. / Nowadays the internet is a widely used tool and the great development and popularity of wireless technologies leads us to a future where the connectivity will be characterized as âanywhere, anytimeâ. Such characteristic is considered essential in 4G systems. However, for a satisfactory user experience a secure and efficient connectivity has to be always available. To obtain such efficiency, the research community has generated a number of promising solutions that achieve significative improvements in system performance, such as adaptive modulation and coding, space-time coding, multiple antennas and MIMO (Multiple Input Multiple Output ) channels, multicarrier modulation, multiuser detection, etc. [1]. Among these solutions, the system adaptation is a particularly interesting one, there is, the system must constantly adapt itself to achieve the best performance for each situation. However, one important premise for the system adaptation is the knowledge of the channel state information (CSI). To obtain this knowledge, several channel estimation strategies were proposed in the literature, each one with advantages and disadvantages. In this work we analyze the impact of channel estimation in the link adaptation through computer simulations1. Two channel estimation techniques with different characteristics were analyzed for some specific scenarios in a MIMO-OFDM (Multiple Input Multiple Output - Orthogonal Frequency Division Multiplexing ) system. To perform the analysis it was used a metric that consider the redundancy introduced to estimate the channel and the channel estimation error of each technique. The obtained results constitute curves that can be used to perform link adaptation in a more realistic way, that is, considering the effect of channel estimation. Besides, it is shown that even the choice of the channel estimation strategy can be an adaptable parameter so that the most adequate channel estimation strategy for each system state is used.

The increasing demand for high data rate transmission over broadband radio channels has imposed significant challenges in wireless communications. Accurate channel estimation has a major impact on the whole system performance. Specifically, reliable estimate of the channel state information (CSI) is more challenging for orthogonal frequency division multiplexing (OFDM) systems in doubly selective fading channels than for the slower fading channels over which OFDM has been deployed traditionally. With the help of a basis expansion model (BEM), a novel multivariate autoregressive (AR) process is developed to model the time evolution of the fast fading channel. Relying on pilot symbol aided modulation (PSAM), a novel Kalman smoothing algorithm based on a second-order dynamic model is exploited, where the mean square error (MSE) of the channel estimator is near to that of the optimal Wiener filter. To further improve the performance of channel estimation, a novel low-complexity iterative joint channel estimation and symbol detection procedure is developed for fast fading channels with a small number of pilots and low pilot power to achieve the bit error rate (BER) performance close to when the CSI is known perfectly. The new channel estimation symbol detection technique is robust to variations of the radio channel from the design values and applicable to multiple modulation and coding types. By use of the extrinsic information transfer (EXIT) chart, we investigate the convergence behavior of the new algorithm and analyze the modulation, pilot density, and error correction code selection for good system performance for a given power level. The algorithms developed in this thesis improve the performance of the whole system requiring only low ratios of pilot to data for excellent performance in fast fading channels. / Graduate

In this dissertation, channel estimation and channel prediction are studied for wireless communication systems. Wireless communication for time-variant channels becomes more important by the fast development of intelligent transportation systems which motivates us to propose a reduced rank channel estimator for time-variant frequency-selective high-speed railway (HSR) systems and a reduced rank channel predictor for fast time-variant flat fading channels. Moreover, the potential availability of large bandwidth channels at mm-wave frequencies and the small wavelength of the mm-waves, offer the mm-wave massive multiple-input multiple-output (MIMO) communication as a promising technology for 5G cellular networks. The high fabrication cost and power consumption of the radio frequency (RF) units at mm-wave frequencies motivates us to propose a low-power hybrid channel estimator for mm-wave MIMO orthogonal frequency-division multiplexing (OFDM) systems. The work on HSR channel estimation takes advantage of the channel's restriction to low dimensional subspaces due to the time, frequency and spatial correlation of the channel and presents a low complexity linear minimum mean square error (LMMSE) estimator for MIMO-OFDM HSR channels. The channel estimator utilizes a four-dimensional (4D) basis expansion channel model obtained from band-limited generalized discrete prolate spheroidal (GDPS) sequences. Exploiting the channel's band-limitation property, the proposed channel estimator outperforms the conventional interpolation based least square (LS) and MMSE estimators in terms of estimation accuracy and computational complexity, respectively. Simulation results demonstrate the robust performance of the proposed estimator for different delay, Doppler and angular spreads. Channel state information (CSI) is required at the transmitter for improving the performance gain of the spatial multiplexing MIMO systems through linear precoding. In order to avoid the high data rate feedback lines, which are required in fast time-variant channels for updating the transmitter with the rapidly changing CSI, a subframe-wise channel tracking scheme is presented. The proposed channel predictor is based on an assumed DPS basis expansion model (DPS-BEM) for exploiting the variation of the channel coefficients inside each sub-frame and an autoregressive (AR) model of the basis coefficients over each transmitted frame. The proposed predictor properly exploits the channel's restriction to low dimensional subspaces for reducing the prediction error and the computational complexity. Simulation results demonstrate that the proposed channel predictor out-performs the DPS based minimum energy (ME) predictor for different ranges of normalized Doppler frequencies and has better performance than the conventional Wiener predictor for slower time-variant channels and almost the similar performance to it for very fast time-variant channels with the reduced amount of computational complexity. The work on the hybrid mm-wave channel estimator considers the sparse nature of the mm-wave channel in angular domain and leverages the compressed sensing (CS) tools for recovering the angular support of the MIMO-OFDM mm-wave channel. The angular channel is treated in a continuous framework which resolves the limited angular resolution of the discrete sparse channel models used in the previous CS based channel estimators. The power leakage problem is also addressed by modeling the continuous angular channel as a multi-band signal with the bandwidth of each sub-band being proportional to the amount of power leakage. The RF combiner is designed to be implemented using a network of low-power switches for antenna subset selection based on a multi-coset sampling pattern. Simulation results validate the effectiveness of the proposed hybrid channel estimator both in terms of the estimation accuracy and the RF power consumption. / Graduate

Automatic modulation classification detects the modulation type of received communication signals. It has important applications in military scenarios to facilitate jamming, intelligence, surveillance, and threat analysis. The renewed interest from civilian scenes has been fuelled by the development of intelligent communications systems such as cognitive radio and software defined radio. More specifically, it is complementary to adaptive modulation and coding where a modulation can be deployed from a set of candidates according to the channel condition and system specification for improved spectrum efficiency and link reliability. In this research, we started by improving some existing methods for higher classification accuracy but lower complexity. Machine learning techniques such as k-nearest neighbour and support vector machine have been adopted for simplified decision making using known features. Logistic regression, genetic algorithm and genetic programming have been incorporated for improved classification performance through feature selection and combination. We have also developed a new distribution test based classifier which is tailored for modulation classification with the inspiration from Kolmogorov-Smirnov test. The proposed classifier is shown to have improved accuracy and robustness over the standard distribution test. For blind classification in imperfect channels, we developed the combination of minimum distance centroid estimator and non-parametric likelihood function for blind modulation classification without the prior knowledge on channel noise. The centroid estimator provides joint estimation of channel gain and carrier phase o set where both can be compensated in the following nonparametric likelihood function. The non-parametric likelihood function, in the meantime, provide likelihood evaluation without a specifically assumed noise model. The combination has shown to have higher robustness when different noise types are considered. To push modulation classification techniques into a more timely setting, we also developed the principle for blind classification in MIMO systems. The classification is achieved through expectation maximization channel estimation and likelihood based classification. Early results have shown bright prospect for the method while more work is needed to further optimize the method and to provide a more thorough validation.

This thesis is concerned with channel estimation and data detection of MIMO-OFDM communication systems using Space-Time Block Coding (STBC) and Space-Frequency Block Coding (SFBC) under frequency selective channels. A new iterative joint channel estimation and signal detection technique for both STBC-OFDM and SFBC-OFDM systems is proposed. The proposed algorithm is based on a processive sequence of events for space time and space frequency coding schemes where pilot subcarriers are used for channel estimation in the first time instant, and then in the second time instant, the estimated channel is used to decode the data symbols in the adjacent data subcarriers. Once data symbols are recovered, the system recursively performs a new channel estimation using the decoded data symbols as pilots. The iterative process is repeated until all MIMO-OFDM symbols are recovered. In addition, the proposed channel estimation technique is based on the maximum likelihood (ML) approach which offers linearity and simplicity of implementation. Due to the orthogonality of STBC and SFBC, high computation efficiency is achieved since the method does not require any matrix inversion for estimation and detection at the receiver. Another major novel contribution of the thesis is the proposal of a new group decoding method that reduces the processing time significantly via the use of sub-carrier grouping for transmitted data recovery. The OFDM symbols are divided into groups to which a set of pilot subcarriers are assigned and used to initiate the channel estimation process. Designated data symbols contained within each group of the OFDM symbols are decoded simultaneously in order to improve the decoding duration. Finally, a new mixed STBC and SFBC channel estimation and data detection technique with a joint iterative scheme and a group decoding method is proposed. In this technique, STBC and SFBC are used for pilot and data subcarriers alternatively, forming the different combinations of STBC/SFBC and SFBC/STBC. All channel estimation and data detection methods for different MIMO-OFDM systems proposed in the thesis have been simulated extensively in many different scenarios and their performances have been verified fully.

[pt] Os sistemas de transmissão em bloco, permitem a transmissão de N símbolos de forma simultânea, seja em modulação de portadora única ou multiportadora. A recepção ótima, no sentido de máxima verossimilhança em canais com multipercursos apresenta um custo computacional elevado de AN, onde A é a ordem da constelação (A igual a 2 para BPSK). Para evitar este alto custo computacional é usual fazer a detecção símbolo a símbolo após a equalização. Nesta dissertação é proposto um receptor com detecção por grupos que apresenta uma complexidade intermediária entre o receptor ótimo e os receptores que utilizam detecção símbolo-a-símbolo em sistemas com transmissão em blocos. O tipo de estrutura idealizada agrupa as componentes do bloco equalizado em grupos e realiza detecção conjunta ótima dos símbolos em cada grupo. Com relação possíveis estratégias de agrupamento foram propostos três métodos, o primeiro método faz uma busca exaustiva pelo agrupamento ótimo e tem como consequência um custo computacional elevado para um número grande de símbolos por bloco. Na procura por algoritmos que evitem uma busca exaustiva pelo agrupamento ótimo, mas que resultem em bons ganhos de desempenho, e a sua aplicação em sistemas com um número elevado de símbolos por bloco, foram propostos dois métodos de agrupamento sub-ótimos e eficientes, cujos receptores apresentaram ganhos de desempenho apreciáveis quando comparados ao receptor convencional. / [en] Block transmission systems allow transmissions of N symbols simultaneously, with single carrier or multi-carrier modulation. Maximum likelihood optimal reception in multipath channels have a high computational cost of AN, where A is the constellation order (A iqual 2 for BPSK). To avoid this cost is usual to make symbol-by-symbol detection after equalization. In this work we propose a receiver with group detection that has a good tradeof between computation complexity and bit error rate performance. The idealized structure groups the components of the equalized block in sub-blocks and does optimal joint detection of the symbols in each sub-block. With relation to possible grouping strategies three methods were proposed. The first one searchs for an optimal grouping and has, as a consequence, a high computational cost for block with a large number of symbols. Sub-optimal efficient algorithms that avoid the exhaustive search for the optimal grouping but show good performance gains and feasible application in systems with large number of symbols per block were proposed. The resulted receivers achieved substantial performance gain in comparison with the conventional symbol-by-symbol receiver.

This dissertation considers three related problems in distributed transmission and reception networks. Generally speaking, these types of networks have a transmit cluster with one or more transmit nodes and a receive cluster with one or more receive nodes. Nodes within a given cluster can communicate with each other using a wired or wireless local area network (LAN/WLAN). The overarching goal in this setting is typically to increase the efficiency of communication between the transmit and receive clusters through techniques such as distributed transmit beamforming, distributed reception, or other distributed versions of multi-input multi-output (MIMO) communication. More recently, the problem of wireless power transfer has also been considered in this setting. The first problem considered by this dissertation relates to distributed reception in a setting with a single transmit node and multiple receive nodes. Since exchanging lightly quantized versions of in-phase and quadrature samples results in high throughput requirements on the receive LAN/WLAN, previous work has considered an approach where nodes exchange hard decisions, along with channel magnitudes, to facilitate combining similar to an ideal receive beamformer. It has been shown that this approach leads to a small loss in SNR performance, with large reductions in required LAN/WLAN throughput. A shortcoming of this work, however, is that all of the prior work has assumed that each receive node has a perfect estimation of its channel to the transmitter. To address this shortcoming, the first part of this dissertation investigates the effect of channel estimation error on the SNR performance of distributed reception. Analytical expressions for these effects are obtained for two different modulation schemes, M-PSK and M2-QAM. The analysis shows the somewhat surprising result that channel estimation error causes the same amount of performance degradation in ideal beamforming and pseudo-beamforming systems despite the fact that the channel estimation errors manifests themselves quite differently in both systems. The second problem considered in this dissertation is related to oscillator stability and phase noise modeling. In distributed transmission systems with multiple transmitters in the transmit cluster, synchronization requirements are typically very strict, e.g., on the order of one picosecond, to maintain radio frequency phase alignment across transmitters. Therefore, being able to accurately model the behavior of the oscillators and their phase noise responses is of high importance. Previous approaches have typically relied on a two-state model, but this model is often not sufficiently rich to model low-cost oscillators. This dissertation develops a new three-state oscillator model and a method for estimating the parameters of this model from experimental data. Experimental results show that the proposed model provides up to 3 dB improvement in mean squared error (MSE) performance with respect to a two-state model. The last part of this work is dedicated to the problem of wireless power transfer in a setting with multiple nodes in the transmit cluster and multiple nodes in the receive cluster. The problem is to align the phases of the transmitters to achieve a certain power distribution across the nodes in the receive cluster. To find optimum transmit phases, we consider a iterative approach, similar to the prior work on one-bit feedback for distributed beamforming, in which each receive node sends a one-bit feedback to the transmit cluster indicating if the received power in that time slot for that node is increased. The transmitters then update their phases based on the feedback. What makes this problem particularly interesting is that, unlike the prior work on one-bit feedback for distributed beamforming, this is a multi-objective optimization problem where not every receive node can receive maximum power from the transmit array. Three different phase update decision rules, each based on the one-bit feedback signals, are analyzed. The effect of array sparsity is also investigated in this setting.

Nowadays, several studies are launched for the design of reliable and safe communications systems that introduce Unmanned Aerial Vehicle (UAV), this paves the way for UAV communication systems to play an important role in a lot of applications for non-segregated military and civil airspaces. Until today, rules for integrating commercial UAVs in airspace still need to be defined, the design of secure, highly reliable and cost effective communications systems still a challenging task. This thesis is part of this communication context. Motivated by the rapid growth of UAV quantities and by the new generations of UAVs controlled by satellite, the thesis aims to study the various possible UAV links which connect UAV/aircraft to other communication system components (satellite, terrestrial networks, etc.). Three main links are considered: the Forward link, the Return link and the Mission link. Due to spectrum scarcity and higher concentration in aircraft density, spectral efficiency becomes a crucial parameter for largescale deployment of UAVs. In order to set up a spectrally efficient UAV communication system, a good understanding of transmission channel for each link is indispensable, as well as a judicious choice of the waveform. This thesis begins to study propagation channels for each link: a mutipath channels through radio Line-of-Sight (LOS) links, in a context of using Meduim Altitude Long drones Endurance (MALE) UAVs. The objective of this thesis is to maximize the solutions and the algorithms used for signal reception such as channel estimation and channel equalization. These algorithms will be used to estimate and to equalize the existing muti-path propagation channels. Furthermore, the proposed methods depend on the choosen waveform. Because of the presence of satellite link, in this thesis, we consider two low-papr linear waveforms: classical Single-Carrier (SC) waveform and Extented Weighted Single-Carrier Orthogonal Frequency-Division Multiplexing (EW-SC-OFDM) waveform. channel estimation and channel equalization are performed in the time-domain (SC) or in the frequency-domain (EW-SC-OFDM). UAV architecture envisages the implantation of two antennas placed at wings. These two antennas can be used to increase diversity gain (channel matrix gain). In order to reduce channel equalization complexity, the EWSC- OFDM waveform is proposed and studied in a muti-antennas context, also for the purpose of enhancing UAV endurance and also increasing spectral efficiency, a new modulation technique is considered: Spatial Modulation (SM). In SM, transmit antennas are activated in an alternating manner. The use of EW-SC-OFDM waveform combined to SM technique allows us to propose new modified structures which exploit exces bandwidth to improve antenna bit protection and thus enhancing system performances.

The power usage of the communication technology industry and the consistent energy-related pollution are becoming major societal and economic concerns. These concern stimulated academia and industry to an intense activity in the new research area of green cellular networks. Bandwidth Efficiency (BE) is one of the most important metrics to select candidate technologies for next-generation wireless communications systems. Nevertheless, the important goal is to design new innovative network architecture and technologies needed to encounter the explosive development in cellular data demand without increasing the power consumption. As a result, Energy Efficiently (EE) has become another significant metric for evaluating the performance of wireless communications systems. MIMO technology has drawn lots of attention in wireless communication, as it gives substantial increases in link range and throughput without an additional increase in bandwidth or transmits power. Multi-user MIMO (MU-MIMO) regarded when evolved Base Station equipped with multiple antennas communicates with several User Terminal (UEs) at the same time. MU-MIMO is capable of improving either the reliability or the BE by improving either the multiplexing gains or diversity gains. A proposed new idea in MU-MIMO refers to the system that uses hundreds of antennas to serve dozens of UEs simultaneously. This so-called, Large Scale-MIMO (LS MIMO) regarded as a candidate technique for future wireless communication systems. An analysis is conducted to investigate the performance of the proposed uplink and downlink of LS MIMO systems with different linear processing techniques at the base station. The most common precoding and receive combining are considered: minimum mean squared error (MMSE), maximum ratio transmission/combining (MRT/MRC), and zero-forcing (ZF)processing. The fundamental problems answered on how to select the number of (BS) antennas M, number of active (UEs) K, and the transmit power to cover a given area with maximal EE. The EE is defined as the number of bits transferred per Joule of energy. A new power consumption model is proposed to emphasise that the real power scales faster with M and K than scaling linearly. The new power consumption model is utilised for deriving closed-form EE maximising values of the number of BS antennas, number of active UEs and transmit power under the assumption that ZF processing is deployed in the uplink and downlink transmissions for analytic convenience. This analysis is then extended to the imperfect CSI case and to symmetric multi-cell scenarios. These expressions provide valuable design understandings on the interaction between systems parameters, propagation environment, and different components of the power consumption model. Analytical results are assumed only for ZF with perfect channel state information (CSI) to compute closed-form expression for the optimal number of UEs, number of BS antennas, and transmit power. Numerical results are provided (a) for all the investigated schemes with perfect CSI and in a single-cell scenario; (b) for ZF with imperfect CSI, and in a multi-cell scenario. The simulation results show that (a) an LS MIMO with 100 - 200 BS antennas are the correct number of antennas for energy efficiency maximisation; (b) these number of BS antennas should serve number of active UEs of the same size; (c) since the circuit power increases the transmit power should increase with number of BS antennas; (d) the radiated power antenna is in the range of 10-100 mW and decreases with number of BS antennas; (e) ZF processing provides the highest EE in all the scenarios due to active interference-suppression at affordable complexity. Therefore, these are highly relevant results that prove LS MIMO is the technique to achieve high EE in future cellular networks.

Aeronautical telemetry suffers from multipath interference, which can be resolved through the use of equalizers at the receiver. The coefficients of data-aided equalizers are computed from a channel estimate. Most channels seen in aeronautical telemetry are sparse, meaning that most of the coefficients of the channel are zero or nearly zero. The maximum likelihood (ML) estimate does not always produce a sparse channel estimate. This thesis surveys a number of sparse estimation algorithms that produce a sparse channel estimate and compares the post-equalizer bit error rates (BER) using these sparse estimates with the post-equalizer BER using the ML estimate. I show that the generalized Orthogonal Matching Pursuit (GOMP) performs the best followed by the Sparse Estimation based on Validation Re-estimated Least Squares (SPARSEVA-RE) and the Least Absolute Shrinkage and Selection Operator (LASSO).