Insight into the nanoscale carrier transport in the rapidly developing class of solutionprocessed semiconductors known as metal halide perovskites is the focal point for these studies. Further advancement in fundamentally understanding photophysical processes associated with charge carrier transport is needed to realize the true potential of perovskites for photovoltaic applications. In this work, we study photogenerated carrier transport to understand the underlying transport behavior of the material on the 10s to 100s nanometer lengthscales. To study these processes, we employ a temporally-resolved and spatially-resolved technique, known as transient absorption microscopy, to elucidate the charge carrier dynamics and propagation associated with metal halide perovskites. This technique provides a simultaneous high temporal resolution (200 fs) and spatial resolution (50 nm) to allow for direct visualization of charge carrier migration on the nanometer length scale. There are many obstacles these carriers encounter between photogeneration and charge collection such as morphological effects (grain boundaries) and carrier interactions (scattering processes). We investigate carrier transport on the nanoscale to understand how morphological effects influence the materials transport behavior. Morphological defects such as voids and grain boundaries are inherently small and traditionally difficult to study directly. Further, because carrier cooling takes place on an ultrafast time scale (fs to ps), the combined spatial and temporal resolution is necessary for direct probing of hot (non-equilibrium) carrier transport. Here we investigate a variety of ways to enhance carrier transport lengthscales by studying how non-equilibrium carriers propagate throughout the material, as well as, carrier cooling mechanisms to extend the non-equilibrium regime. For optoelectronic devices based on polycrystalline semiconducting thin films, grain boundaries are important to consider since solution-based processing results in the formation of well-defined grains. In Chapter 3, we investigate equilibrium carrier transport in metal halide perovskite thin films that are created via the highly desired solution processing method. Carrier transport across grain boundaries is an important process in defining efficiency due to the literary discrepancies on whether the grains limit carrier transport or not. In this work, we employ transient absorption microscopy to directly measure carrier transport within and across the boundaries. By selectively imaging sub-bandgap states, our results show that lateral carrier transport is slowed down by these states at the grain boundaries. However, the long carrier lifetimes allow for efficient transport across the grain boundaries. The carrier diffusion constant is reduced by about a factor of 2 for micron-sized grain samples by the grain boundaries. For grain sizes on the order of ∼200 nm, carrier transport over multiple grains has been observed within a time window of 5 ns. These observations explain both the shortened photoluminescence lifetimes at the boundaries as well as the seemingly benign nature of the grain boundaries in carrier generation. The results of this work provide insight into why this defect tolerant material performs so well. Photovoltaic performance (power conversion efficiency) is governed by the ShockleyQueisser limit which can be overcame if hot carriers can be harvested before they thermalize. To convert sunlight to usable electricity, the photogenerated charge carriers need to migrate long distances and or live long enough to be collected. It is unclear whether these hot carriers can migrate a long enough distance for efficient collection. In Chapter 4, we report direct visualization of hot-carrier migration in methylammonium lead iodide (CH3NH3PbI3) thin films by ultrafast transient absorption microscopy. This work demonstrates three distinct transport regimes. (i) Quasiballistic transport, (ii) nonequilibrium transport, and (iii) diffusive transport. Quasiballistic transport was observed to correlate with excess kinetic energy, resulting in up to 230 nanometers of transport distance that could overcome grain boundaries. The nonequilibrium transport persisted over tens of picoseconds and ~600 nanometers before reaching the diffusive transport limit. These results suggest potential applications of hot-carrier devices based on hybrid perovskites to ultimately overcome the Shockley-Queisser limit. In the next work, we investigated a way to extend non-equilibrium carrier lifetime, which ultimately corresponds to an accelerated carrier transport. From the knowledge of the hot carrier transport work, we showed a proof of concept that the excess kinetic energy corresponds to long range carrier transport. To further develop the idea of harvesting hot carriers, one must investigate a way to make the carriers stay hot for a longer period (i.e. cool down slower). In Chapter 5, we slow down the cooling of hot carriers via a phonon bottleneck, which points toward the potential to overcome the Shockley-Queisser limit. Open questions remain on whether the high optical phonon density from the bottleneck impedes the transport of these hot carriers. We show a direct visualization of hot carrier transport in the phonon bottleneck regime in both single crystalline and polycrystalline lead halide perovskites, more specifically, a relatively new class of alkali metal doped perovskites (RbCsMAFA), which has one of the highest power conversion efficiencies. Remarkably, hot carrier diffusion is enhanced by the presence of a phonon bottleneck, the exact opposite from what is observed in conventional semiconductors such as GaAs. These results showcase the unique aspects of hot carrier transport in hybrid perovskites and suggest even larger potential for hot carrier devices than previously envisioned by the initial results presented in Chapter 4. The final chapter will be divided into two sections, as we summarize and highlight our collaborative efforts towards homogenization of carrier dynamics via doping perovskites with alkali metals and our work on two-dimensional hybrid quantum well perovskites. Further studies on the champion solar cell (RbCsMAFA) were performed to elucidate the role inorganic cations play in this material. By employing transient absorption microscopy, we show that alkali metals Rb+ and Cs+ are responsible for inducing a more homogenous halide (Iand Br- ) distribution, despite the partial incorporation into the perovskite lattice. This translates into improved electronic dynamics, including fluorescence lifetimes above 3 µs and homogenous carrier dynamics, which was visualized by ultrafast microscopy. Additionally, there is an improvement in photovoltaic device performance. We find that while Cs cations tend to distribute homogenously across the perovskite grain, Rb and K cations tend to phase segregate at precursor concentrations as low as 1%. These precipitates have a counter-productive effect on the solar cell, acting as recombination centers in the device, as argued from electron beam-induced current measurements. Remarkably, the high concentration of Rb and Cs agglomerations do not affect the open-circuit voltage, average lifetimes, and photoluminescence distribution, further indicating the perovskite’s notorious defect tolerance. A new class of high-quality two dimensional organic-inorganic hybrid perovskite quantum wells with tunable structures and band alignments was studied. By tuning the functionality of the material, the strong self-aggregation of the conjugated organic molecules can be suppressed, and 2D organic-halide perovskite superlattice crystals and thin films can be easily obtained via onestep solution-processing. We observe energy transfer and charge transfer between adjacent organic and inorganic layers, which is extremely fast and efficient (as revealed by ultrafast spectroscopy characterizations). Remarkably, these 2D hybrid perovskite superlattices are stable, due to the protection of the bulky hydrophobic organic groups. This is a huge step towards the practicality of using perovskites for optoelectronics, since stability is always a huge concern with water-sensitive materials. The molecularly engineered 2D semiconductors are on par with III-V quantum wells and are promising for next-generation electronics, optoelectronics, and photonics.

To better understand the physical and electronic properties of donor and acceptor-based structures used in organic electronic applications, a variety of oligothiophene and naphthalene diimide-based small conjugated molecules were designed, synthesized, and characterized. The materials were initially synthesized using oxidative copper-chloride coupling reactions, palladium-catalyzed amination reactions, Friedal-Crafts acylations, Negishi coupling reactions, and Stille coupling reactions. Once isolated, the physical properties of the compounds were characterized through a combination of X-ray crystal structure, thermogravimetric analysis, differential scanning calorimetry, UV-vis. absorption spectroscopy, cyclic voltammetry, and differential pulse voltammetry, along with comparison to quantum-chemical calculations. In some cases, the radical cations or radical anions were generated by chemical oxidation and analyzed by vis-NIR spectroscopy. Furthermore, the electronic properties of the materials were investigated through incorporation as solution-processed active layers in organic field-effect transistors. Multiple examples exhibited hole- and / or electron-transport properties with electron mobility values of up to 1.5 cm²V⁻¹s⁻¹, which is among the highest yet reported for an n-channel OFET based on a solution-processed small molecule.