No description available.

No description available.

No description available.

No description available.

The thesis is focused on the study of high temperature water gas shift catalysis, the identification of new improved catalysts and the study of the kinetics and mechanism of reaction over these catalysts. Rh-promoted Fe2O3-Cr2O3 was found to offer best performance which was significantly better than unpromoted catalyst over wide temperatures range. An extensive literature survey is first reported. Guidelines to develop new WGS catalysts are developed. As a result, the activities of precious metals supported on various oxides for high temperature WGS reaction have been tested. Rh(1wt%) doped Fe2O3/Cr2O3, exhibits the highest activity for WGS over a wide temperature range. 5wt%CuO/Fe2O3-Cr2O3, 1wt%Pt/Cr2O3, 1wt%Pt/Fe2O3-Cr2O3, 1wt%Pt/U3O8, 1wt%Pt/10%U3O8-Al2O3 and 1wt%Pt/5%V2O5-TiO2 fall into the second most active catalysts group, with an improved activity compared to commercial Fe2O3-Cr2O3 catalyst. It is clear that both the support/catalyst and the promoter can affect the efficiency of the WGS, leading to the obvious inference that the reaction rate is controlled at the promoter ??? support interface. Further kinetic studies and characterisation (TPR, TPD, pulse-adsorption (reaction)) on Rh/Fe3O4/Cr2O3 have been conducted. The study, conducted under conditions without inhibition from products of both forward and backward reactions, shows that the overall reaction rate expression is described as: 2 22 ??? =0.0041exp(???4042.6 ) 0.64 0.5 ???0.024 exp(???6022.9 ) 0.46 0.73 CO CO H O CO H r PP P P T T . Kinetics studies carried out under fuel reforming gas compositions shows that reaction rate expression changed when the temperature of reaction varied. The reaction rate equations at temperatures of 573K, 623K and 673K are derived as: 573K: 2 2 2 - 2.84 10-6 0.6 0.12 - 9.08 10-7 0.09 0.52 rCO = ?? PCO PH O ?? PCO PH 623K: 2 2 2 - 1.45 10-6 0.99 0.40 - 7.12 10-7 0.11 0.73 rCO = ?? PCO PH O ?? PCO PH 673K: -6 2 2 2 - = 4.37 ?? 10 0.86 0.41 -1.83 ??10-6 0.28 0.66 rCO PCO PH O PCO PH , The apparent activation energy was 61.7??2.5 kJmol-1 . TPR, TPD, TPO characterisation studies and reoxidation of catalysts by CO2 or H2O show that the active site for high temperature WGS reaction on Rh/Fe2O3/Cr2O3 is reduced magnetite Fe3O4 which dissociatively breaks down the H2O to form H* and OH* and adsorbs CO2. The deposited metal, Rh, acts as a promoter by facilitating the uptake of hydrogen (H2) and carbon monoxide (CO), desorption of H2 (at high temperature) and CO2.

Thesis (Ph. D.)--University of California, San Diego, 1982. / Vita. Includes bibliographical references (leaves 94-98).

Metal-catalyzed cycloadditions of alkynes with isocyanates or nitriles are valuable tools for the synthesis of complex carbocycles and heterocycles. Although this transformation has been studied for over three decades, the cyclizations of disocyanates with 1,3-dienes or allenes are not known and the asymmetric cycloadditions of isocyanates are scarce. To expand the scope of these powerful reactions, we studied the semi-intramolecular metal-catalyzed cycloaddition of several unsaturated systems with isocyanates. Our results show that further work in this area is needed to suppress the formation of undesired homo-coupled adducts and obtain the bicyclic products in a more efficient manner. 1,3-butadienes are versatile building blocks in organic synthesis. Therefore, it is our interest to develop an efficient method for their preparation making 1,3-butadienes more available for the organic chemist. A number of methods are known for the synthesis of these compounds, but the majority of them present problems such as poor regioselectivity, low atom economy, or require the use of toxic or non-readily available reagents. In order to develop a more effective synthesis, we employed (allenylmethyl)silanes as intermediates for the preparation of 1,3-butadienes utilizing (4-bromobut 2-ynyl)trimethylsilane as a diene equivalent. A Nozaki-Hiyama-Kishi type transformation was used for the highly regioselective preparation of (trimethylsilyl)methylallenic alcohols from aldehydes and ketones. In addition, several tridentate bis(oxazolinyl)carbazole ligands were synthesized and used for the enantioselective synthesis of allenic alcohols. Carbazole ligands synthesis was achieved by the Suzuki coupling of carbazoles with different boronic acids followed by carbonylative amidation and cyclization. We report an efficient new method for the desilylation of allenic alcohols providing a variety of secondary and tertiary 1,3-butadienylcarbinols. Furthermore, our interest in extending this methodology led us to the discovery of a novel synthesis of 2-aminomethyl-1,3-dienes from N-tosyl imines.

Thesis (M.S.)--Ball State University, 2009. / Title from PDF t.p. (viewed on Dec. 14, 2009). Includes bibliographical references.

This investigation has produced four major results: (1) Thermodynamic properties of chromium metal, aqueous ions, hydrolysis species, oxides and hydroxides were compiled. Data were critically evaluated, some data were recalculated, and thermodynamic properties were selected. (2) A method was developed for separating chromium from its natural water matrix using sequential anion and cation exchange chromatography. (3) A method for determining the ⁵³Cr/⁵²Cr ratio using solid-source thermal ionization mass spectrometry with the silica gel-boric acid ionization- - enhancement technique was developed. (4) Ground water samples from six locations were analyzed for their ⁵³Cr/⁵²Cr ratio using the above methods. Results from carefully measured electromotive force (emf) values for the reduction of Cr³⁺ to Cr²⁺ were recalculated for compatibility with the infinite dilution standard state, and a revised ∆G°(f) for Cr²⁺(aq) was calculated. Equilibrium constants for chromium(III) hydrolysis were taken from Rai, et al. (1987) and for chromium(VI) hydrolysis from Palmer, et al. (1987). The ion exchange method is based on retention of chromium(VI) on strongly basic anion exchange resin at pf1 4 and its reductive elution with 2N HNO₃ . Chromium(III) is retained on strongly acidic cation exchange resin at pH 1.3 and eluted with 5N HNO₃. Possible interferents include metals that form both oxyanions and cations. High-purity reagents and containers made of rigorously cleanable noncontaminating materials are required. Samples for mass spectrometry are pretreated with aqua regia and concentrated nitric acid, then mixed with silica and boric acid and transferred to the tantalum filament of a stainless steel and glass sample holder. The ⁵³Cr/⁵²Cr ratio was measured to avoid isobaric interferences with iron. To be significantly different from each other, isotopic signatures must differ by at least 0.5 per mil. Samples from six locations were examined for their ⁵³Cr/⁵²Cr ratio. For the samples with natural origin, the spread in δ⁵³Cr values of-2.0 to +3.0 per mil suggests that samples of chromium derived from differing source materials or from different geographic locations have distinct isotopic signatures. Conclusions regarding source-related variations in the isotopic signature of contaminant chromium are problematic, because specific information about the respective source materials is lacking.

No description available.