1 |
Direct determination of cadmium and beryllium in coal and fly ash slurries using graphite furnace atomic absorption spectrometryHaraldsen, Lana Celeste January 1990 (has links)
Bibliography: pages 119-126. / Graphite Furnace Atomic Absorption Spectrometry (GFAAS) was used for the determination of cadmium and beryllium in coal and fly ash slurries. Sample preparation involved grinding the sample to a fine powder and slurrying it in a suitable solvent. Stable slurries were maintained by magnetic stirring during sampling. Pyrolytically coated graphite tubes were used for cadmium determinations, while beryllium was determined with platform atomisation. Ammonium dihydrogen orthophosphate and magnesium nitrate matrix modifiers were used for cadmium and beryllium determinations respectively. Calibration graphs constructed with aqueous standards containing the appropriate matrix modifier were rectilinear to at least 100 pg cadmium and 45 pg beryllium. Results were calculated with integrated peak area measurements. The detection limits were 2.9 pg for cadmium and 0.7pg for beryllium. Beryllium determinations were performed with semi-automatic sample introduction. The novel semi-automatic sampling unit utilised magnetic stirring for· the maintenance of stable slurries and operated with the standard Perkin-Elmer AS-40 autosampler. The principles of this unit were extended to the development of a fully automatic auto-sampling unit. The design and operation of both units are described. The accuracy of the methods was evaluated by analysing standard reference materials and in some cases, comparisons with acid digestion procedures. Data are presented for the analysis of South African coal and fly ash samples. The slurry methods had acceptable accuracy and precision. In comparison with the conventional acid digestion procedures using high pressure bombs, a time-saving advantage was realised.
|
2 |
Trace Elemental Analysis of Ashes in the Combustion of the Binder Enhanced d-RDF by Inductively Coupled Plasma Atomic Emission SpectroscopyTai, Chia-Hui 11 1900 (has links)
Incineration is an attractive solution to the problems of disposing of municipal solid wastes and supplying energy. Because up to 25 percent of the waste in refuse-derived-fuel systems is ash, the physical and chemical characteristics of ash become more and more important for its potential impacts and methods suitable for their disposal. Trace elements concentration in ash is of great interest because of its relationship to regulatory criteria under the Resource Conservation and Recovery Act (RCRA) regarding toxicity and hazards. The applications of a microwave oven sample dissolution method has been tested on a variety of standard reference materials, with reproducible and accurate results. Fourteen trace elements, As, Ba, Be, Cd, Cr, Cu, Hg, Ni, Pb, Sb, Se, Tl, V, and Zn, from the dissolved ash samples were determined by inductively coupled plasma atomic emission spectrometry.
|
3 |
Sintering and slagging of mineral matter in South African coals during the coal gasification processMatjie, Ratale Henry 11 November 2008 (has links)
Coals, from mines in the Highveld coalfield, as well as gasification ash samples were characterised, in order to understand the mineralogical and chemical properties of the individual components in the gasification feedstocks. X-ray diffraction of low temperature oxygen-plasma ash indicates that the coals contain significant proportions of kaolinite, quartz and a fluxing elements-bearing mineral (dolomite), plus minor concentrations of illite and other fluxing elements-bearing minerals namely calcite, pyrite and siderite. Of the feed coal, the -75+53 mm size fraction has a high pyrite, and to a lesser extent a high calcite and dolomite content. However, the small proportion of iron-bearing phases (from the reaction between kaolinite and pyrite) in samples taken from the gasifier implies that pyrite contributes minimally to sintering or slagging in this case. Calcite is mainly present in the >1.8 g/cm3 density fraction of the feed coal, whereas dolomite is mainly present in the 1.5-1.8 g/cm3 density fraction, as inclusions or fine cleats in the coal matrix. Electron microprobe analyses of coals from the six different South African mines confirmed that some Ca, Mg, Al, Si, Na, K, Ti and Fe are present in the organic matrix in the coal samples tested in this study, but the amounts of these are small compared with the fluxing elements in minerals. XRD and microprobe analyses indicate that the ash clinker samples taken from the gasifiers contain a number of crystalline high temperature phases, including anorthite, mullite, cristobalite, quartz and diopside. FactSage confirmed that anorthite and mullite are equilibrium phases at elevated temperatures in the ash clinkers and heated rock fragments. Limited reaction takes place between the included coal minerals and the extraneous rock fragments. / Thesis (PhD)--University of Pretoria, 2008. / Materials Science and Metallurgical Engineering / unrestricted
|
Page generated in 0.0828 seconds