1 |
Designing Urban Road Congestion Charging Systems : Models and Heuristic Solution ApproachesEkström, Joakim January 2008 (has links)
The question of how to design a congestion pricing scheme is difficult to answer and involves a number of complex decisions. This thesis is devoted to the quantitative parts of designing a congestion pricing scheme with link tolls in an urban car traffic network. The problem involves finding the number of tolled links, the link toll locations and their corresponding toll level. The road users are modeled in a static framework, with elastic travel demand. Assuming the toll locations to be fixed, we recognize a level setting problem as to find toll levels which maximize the social surplus. A heuristic procedure based on sensitivity analysis is developed to solve this optimization problem. In the numerical examples the heuristic is shown to converge towards the optimum for cases when all links are tollable, and when only some links are tollable. We formulate a combined toll location and level setting problem as to find both toll locations and toll levels which maximize the net social surplus, which is the social surplus minus the cost of collecting the tolls. The collection cost is assumed to be given for each possible toll location, and to be independent of toll level and traffic flow. We develop a new heuristic method which is based on repeated solutions of an approximation to the combined toll location and level setting problem. Also, a known heuristic method for locating a fixed number of toll facilities is extended, to find the optimal number of facilities to locate. Both heuristics are evaluated on two small networks, where our approximation procedure shows the best results. Our approximation procedure is also employed on the Sioux Falls network. The result is compared with different judgmental closed cordon structures, and the solution suggested by our method clearly improves the net social surplus more than any of the judgmental cordons.
|
2 |
Designing Urban Road Congestion Charging Systems : Models and Heuristic Solution ApproachesEkström, Joakim January 2008 (has links)
<p>The question of how to design a congestion pricing scheme is difficult to answer and involves a number of complex decisions. This thesis is devoted to the quantitative parts of designing a congestion pricing scheme with link tolls in an urban car traffic network. The problem involves finding the number of tolled links, the link toll locations and their corresponding toll level. The road users are modeled in a static framework, with elastic travel demand.</p><p>Assuming the toll locations to be fixed, we recognize a level setting problem as to find toll levels which maximize the social surplus. A heuristic procedure based on sensitivity analysis is developed to solve this optimization problem. In the numerical examples the heuristic is shown to converge towards the optimum for cases when all links are tollable, and when only some links are tollable.</p><p>We formulate a combined toll location and level setting problem as to find both toll locations and toll levels which maximize the net social surplus, which is the social surplus minus the cost of collecting the tolls. The collection cost is assumed to be given for each possible toll location, and to be independent of toll level and traffic flow. We develop a new heuristic method which is based on repeated solutions of an approximation to the combined toll location and level setting problem. Also, a known heuristic method for locating a fixed number of toll facilities is extended, to find the optimal number of facilities to locate. Both heuristics are evaluated on two small networks, where our approximation procedure shows the best results.</p><p>Our approximation procedure is also employed on the Sioux Falls network. The result is compared with different judgmental closed cordon structures, and the solution suggested by our method clearly improves the net social surplus more than any of the judgmental cordons.</p>
|
3 |
Life-cycle Greenhouse Gas Emissions and Water Footprint of Residential Waste Collection and Management SystemsMaimoun, Mousa 01 January 2015 (has links)
Three troublesome issues concerning residential curbside collection (RCC) and municipal solid waste (MSW) management systems in the United States motivated this research. First, reliance upon inefficient collection and scheduling procedures negatively affect RCC efficiency, greenhouse gas (GHG) emissions, and cost. Second, the neglected impact of MSW management practices on water resources. Third, the implications of alternative fuels on the environmental and financial performance of waste collection where fuel plays a significant rule. The goal of this study was to select the best RCC program, MSW management practice, and collection fuel. For this study, field data were collected for RCC programs across the State of Florida. The garbage and recyclables generation rates were compared based on garbage collection frequency and use of dual-stream (DS) or single-stream (SS) recyclables collection system. The assessment of the collection programs was evaluated based on GHG emissions, while for the first time, the water footprint (WFP) was calculated for the most commonly used MSW management practices namely landfilling, combustion, and recycling. In comparing alternative collection fuels, two multi-criteria decision analysis (MCDA) tools, TOPSIS and SAW, were used to rank fuel alternatives for the waste collection industry with respect to a multi-level environmental and financial decision matrix. The results showed that SS collection systems exhibited more than a two-fold increase in recyclables generation rates, and a ~2.2-fold greater recycling efficiency compared to DS. The GHG emissions associated with the studied collection programs were estimated to be between 36 and 51 kg CO2eq per metric ton of total household waste (garbage and recyclables), depending on the garbage collection frequency, recyclables collection system (DS or SS) and recyclables compaction. When recyclables offsets were considered, the GHG emissions associated with programs using SS were estimated between -760 and -560, compared to between -270 and -210 kg CO2eq per metric ton of total waste for DS programs. In comparing the WFP of MSW management practices, the results showed that the WFP of waste landfilling can be reduced through implementing bioreactor landfilling. The WFP of electricity generated from waste combustion was less than the electricity from landfill gas. Overall, the WFP of electricity from MSW management practices was drastically less than some renewable energy sources. In comparing the WFP offsets of recyclables, the recycling of renewable commodities, e.g. paper, contributed to the highest WFP offsets compared to other commodities, mainly due to its raw material acquisition high WFPs. This suggests that recycling of renewable goods is the best management practice to reduce the WFP of MSW management. Finally, the MCDA of alternative fuel technologies revealed that diesel is still the best option, followed by hydraulic-hybrid waste collection vehicles (WCVs), then landfill gas (LFG) sourced natural gas, fossil natural gas and biodiesel. The elimination of the fueling station criterion from the financial criteria ranked LFG-sourced natural gas as the best option; suggesting that LFG sourced natural gas is the best alternative to fuel WCV when accessible. In conclusion, field data suggest that RCC system design can significantly impact recyclables generation rate and efficiency, and consequently determine environmental and economic impact of collection systems. The WFP concept was suggested as a method to systematically assess the impact of MSW management practices on water resources. A careful consideration of the WFP of MSW management practices and energy recovered from MSW management facilities is essential for the sustainable appropriation of water resources and development.
|
Page generated in 0.0692 seconds