51 |
The elastic stability of thin-walled folded-plate simple and multi-celled structuresWilliams, A. F. January 1988 (has links)
No description available.
|
52 |
Punching shear failure of reinforced concrete flat slabs supported on steel edge columnNgekpe, B. E. January 2016 (has links)
This study examines punching shear failure at edge supported flat slab. Due to the significant dearth of research on punching shear at edge steel column, this study focuses on the design and performance of a novel shearhead system proposed for edge connection. By considering multi-stage processes and parameters that influence punching shear failure, both numerical and experimental studies were adopted. Firstly linear finite element analysis was employed to study the relationship between the continuous structure and the representative specimen; in order to support decisions on boundary conditions that create the similitude. A nonlinear (NLFEA) model was proposed where various concrete material constitutive models were compared and contrasted. The Total Strain crack model was adopted on the ground that it accounts for the tensile strength of cracked concrete which was ignored in previous theoretical model that lead to poor prediction of punching shear. By considering the appropriate material constitutive model for concrete and steel, material parameters, appropriate modelling scheme capable of predicting punching shear was formulated. The adopted modelling scheme was validated using previous research work. Numerical results reveal that punching shear is influenced most significantly by concrete tensile strength, fracture energy. The shearhead assembly was design with using ACI318-05 and Newzealand codes recommendations with some modifications. These are only codes that provide design guidance on shearhead. Experimental and numerical results show that the shearhead contributes appreciably to punching shear capacity of the edge connection. Various design codes on punching shear were compared; Eurocode 2 provides a good prediction of punching shear at edge support; which correlate well with experimental result. Hence, it was adopted to propose an equation for punching shear for edge connection with shearheads. Most importantly, appropriate design guidance and analytical equation have been proposed for shearhead connection. The design guidance and equation would enable practising Engineers to design shearheads without going through the rigor of experimental or numerical investigation. This study has contributed appreciably to the applicability of steel column in flat slab construction.
|
53 |
Bracing design requirements for inelastic membersLi, Guzhao. January 2002 (has links)
Thesis (Ph. D.)--University of Texas at Austin, 2002. / Vita. Includes bibliographical references.
|
54 |
Post-compressed plates for strengthening preloaded reinforced concretecolumnsWang, Lu, 王璐 January 2013 (has links)
Reinforced concrete (RC) columns are the primary load-bearing structural components in buildings. Over time these columns may need to be repaired or strengthened either due to defective construction, having higher loads than those foreseen in the initial design of the structure, or as a result of material deterioration or accidental damage. Three external strengthening methods, namely steel jacketing, concrete jacketing and composite jacketing, are commonly adopted for upgrading the ultimate load capacity of RC columns. Among these strengthening techniques for RC columns, steel jacketing, which is easy to construct, less prone to debonding and has better fire resistance than bonded plates, has been proven to be an effective retrofitting scheme and is the most commonly used.
Different methods for strengthening existing RC columns have been proposed in the literature. However, no matter which jacket is used to strengthen RC columns, the adverse effects of pre-existing loads on stress-lagging between the concrete core and the new jacket have yet to be solved. In order to deal with this problem, a new postcompression approach was proposed for strengthening preloaded RC columns. In this approach, the slightly precambered steel plates were used. The advantages of this ‘post-compressed plates’ (PCP) strengthening technique are that both the strength and deformability of existing columns can be enhanced and the design life of old buildings can be prolonged.
Due to the aforementioned advantages, the PCP strengthening technique was investigated in this study. To begin with, axial compression tests of the PCP strengthened columns were conducted. The overall response, in particular the internal force distribution between concrete and steel plates was obtained. It was observed that the plate thickness and preloading level had dominant effects on the behaviour of PCP strengthened columns. Subsequently, eccentric compression tests of PCP strengthened columns were undertaken. The behaviour of PCP strengthened columns was mainly affected by the degree of eccentricity and plate thickness. Placing flat and precambered steel plates on the tension and compression sides respectively of the RC columns and using post-compression method on the compression side can significantly improve the ultimate load capacity of RC columns under large eccentricity; while placing precambered steel plates on the side faces of the RC columns can significantly improve the ultimate load capacity of RC columns under small eccentricity. Finally, axial compression tests of PCP repaired fire-exposed columns were carried out. The ultimate load capacity of fire-exposed columns can be restored up to 72% of original level by using this post-compression approach. The corresponding theoretical models were also developed to predict the ultimate load capacity of PCP strengthened columns. Comparison of theoretical and experimental results showed that the theoretical models accurately predicted the load-carrying capacities of PCP strengthened columns.
According to the experimental and theoretical results, a unified design procedure for the PCP strengthened columns was proposed to aid engineers in designing this new type of PCP strengthened columns and to ensure proper column detailing for desirable performance. The design procedure was validated by the available experimental and theoretical results. / published_or_final_version / Civil Engineering / Doctoral / Doctor of Philosophy
|
55 |
Bracing design requirements for inelastic membersLi, Guzhao 04 May 2011 (has links)
Not available / text
|
56 |
TIE PLATE EFFECTS IN WEAKLY BATTENED COLUMNSFreeman, Barbara Gail, 1932- January 1973 (has links)
No description available.
|
57 |
A three-dimensional study of pillar stresses in mines with irregular mining boundaries.Dhar, Bharat Bhushan. January 1970 (has links)
No description available.
|
58 |
Evaluation of steel I-section beam and beam-column bracing requirements by test simulationLokhande, Ajinkya M. 12 January 2015 (has links)
The ANSI/AISC 360-10 Appendix-6 provisions provide limited guidance on the bracing requirements for beam-columns. In cases involving point (nodal) or shear panel (relative) lateral bracing only, these provisions simply sum the corresponding strength and stiffness requirements for column and beam bracing. Based on prior research evidence, it is expected that this approach is accurate to conservative when the requirements can be logically added. However, in many practical beam-column bracing situations, the requirements cannot be logically added. This is because of the importance of the brace and transverse load position through the cross-section depth, as well as the fact that both torsional and lateral restraint can be important attributes of the general bracing problem. These attributes of the bracing problem can cause the current beam-column bracing requirement predictions to be unconservative.
In addition, limited guidance is available in the broader literature at the current time regarding the appropriate consideration of combined lateral and torsional bracing of I-section beams and beam-columns. Nevertheless, this situation is quite common, particularly for beam-columns, since it is rare that separate and independent lateral bracing systems would be provided for both flanges. More complete guidance is needed for the proper consideration of combined bracing of I-section beams and beam-columns in structural design.
This research focuses on a reasonably comprehensive evaluation of the bracing strength and stiffness requirements for doubly-symmetric I-section beams and beam-columns using refined Finite Element Analysis (FEA) test simulation. The research builds on recent simulation studies of the basic bracing behavior of beams subjected to uniform bending. Various cases of beam members subjected to moment gradient are considered first. This is followed by a wide range of studies of beam-column members subjected to constant axial load and uniform bending as well as axial load combined with moment gradient loading. A range of unbraced lengths are considered resulting in different levels of plasticity at the member strength limit states. In addition, various bracing configurations are addressed including point (nodal) lateral, shear panel (relative) lateral, point torsional, combined point lateral and point torsional, and combined shear panel lateral and point torsional bracing.
|
59 |
Behaviour of slender high-strength concrete columnsBillinger, Mark P January 1996 (has links)
Thesis (PhD)--University of South Australia, 1996
|
60 |
Behaviour of slender high-strength concrete columnsBillinger, Mark P January 1996 (has links)
Thesis (PhD)--University of South Australia, 1996
|
Page generated in 0.0343 seconds