The present work provides a micromechanics approach based on the generalized self-consistent composite cylinders method as a non-Eshelby approach towards for assessing the impact of carbon nanotubes on the multi-functional nature of nanocom-posites in which they are a constituent. Emphasis is placed on the effective elastic properties as well as electrical and thermal conductivities of nanocomposites con-sisting of randomly oriented single walled carbon nanotubes in epoxy. The effective elastic properties of aligned, as well as clustered and well-dispersed nanotubes in epoxy are discussed in the context of nanotube bundles using both the generalized self-consistent composite cylinders method as well as using computational microme-chanics techniques. In addition, interphase regions are introduced into the composite cylinders assemblages to account for the varying degrees of load transfer between nanotubes and the epoxy as a result of functionalization or lack thereof. Model pre-dictions for randomly oriented nanotubes both with and without interphase regions are compared to measured data from the literature with emphasis placed on assessing the bounds of the effective nanocomposite properties based on the uncertainty in the model input parameters. The generalized self-consistent composite cylinders model is also applied to model the electrical and thermal conductivity of carbon nanotube-epoxy nanocomposites. Recent experimental observations of the electrical conductivity of carbon nanotube polymer composites have identified extremely low percolation limits as well as a per-ceived double percolation behavior. Explanations for the extremely low percolation limit for the electrical conductivity of these nanocomposites have included both the creation of conductive networks of nanotubes within the matrix and quantum effects such as electron hopping or tunneling. Measurements of the thermal conductivity have also shown a strong dependence on nanoscale effects. However, in contrast, these nanoscale effects strongly limit the ability of the nanotubes to increase the thermal conductivity of the nanocomposite due to the formation of an interfacial thermal resistance layer between the nanotubes and the surrounding polymer. As such, emphasis is placed here on the incorporation of nanoscale effects, such as elec-tron hopping and interfacial thermal resistance, into the generalized self-consistent composite cylinder micromechanics model.

The aim of this study is to develop an explicit analytical formulation based on the anisotropic elasticity theory that determines the behavior of fiber reinforced composite vessel under hygrothermal loading. The loading is studied for three cases separately, which are plane strain case, free ends and pressure vessel cases. For free-end and pressure vessel cases, the vessel is free to expand, on the other hand for plane strain case, the vessel is prevented to expand. Throughout the study, constant, linear and parabolic temperature distributions are investigated and for each distribution, separate equations are developed. Then, a suitable failure theory is applied to investigate the behavior of fiber reinforced composite vessels under the thermal and moisture effects. Throughout the study, two computer programs are developed which makes possible to investigate the behavior of both symmetrically and antisymmetrically oriented layers. The first program is developed for plane strain case, where the second one is for pressure vessel and free-end cases. Finally, several thermal loading conditions have been carried out by changing the moisture concentration and temperature distributions and the results are tabulated for comparison purposes.

Composite materials show heterogeneity at different length scales. hence concurrent multiscale analysis is the only reliable method to analyze them. But unfortunately there is no concurrent multi-scale strategy that is efficient, and accurate while addressing all kinds of problems. This lack of reliability is partly because there is no micro-mechanical model which inherently keeps all relevent global information with it. This thesis tries to fill this gap. The presented micro-mechanical model not only homogenizes the micro-structure but also keeps the global information with it. Most of the micro-mechanical models in the literature extract the Representative Volume Element (RVE) from the continuum for analysis which results in loss of information and accuracy. In the present approach also, the RVE has been extracted from the continuum but with the major difference that all the macro/meso-scopic parameters are accounted for. Five macro/meso-scopic one dimensional parameters have been defined which completely define the effect of continuum. 11 for one dimensional stretch, _1 for torsion, __ (_ = 2, 3) for bending and _33 for uniform pressurization due to the presence of the continuum. Further, the above macro/meso-scopic parameters are proven, by the asymptotic, theory to be constant at a cross section but vary, in general, over the length of the fiber. Hence, the analysis is valid for any location and is not restricted to any local domain. Three major problems have been addressed: • Homogenization and analysis of RVE without any defects • Homogenization and analysis of RVE with fiber-matrix de-bonding • Homogenization and analysis of RVE with radial matrix cracking. Variational Asymptotic Method (VAM) has been used to solve the above mentioned problems analytically. The results have been compared against standard results in the literature and against 3D FEA. At the end, results for “Radial deformation due to torsion” problem will be presented which was solved “accidentally.”