551 |
Corrosion of high-chromium and conventional steels embedded in concreteNachiappan, Vijayakumar. January 2003 (has links)
Thesis (M.S.)--West Virginia University, 2003. / Title from document title page. Document formatted into pages; contains ix, 56 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 51-52).
|
552 |
Strain energy capacity of reinforced concrete beams /Law, Man-wai. January 1987 (has links)
Thesis (M. Phil.)--University of Hong Kong, 1987.
|
553 |
Shear strength of concrete joints under dynamic loads.Lui, Lup-moon. January 1977 (has links)
Thesis--M. Phil., University of Hong Kong.
|
554 |
Ultimate strength and deformation of rectangular prestressed concrete beams subjected to combined bending and shear.Chung, Hung-wan. January 1963 (has links)
Thesis (M. Sc. Eng.), University of Hong Kong. / Erratum slip inserted. Mimeographed.
|
555 |
A plasticity model for confined concrete under uniaxial loading /Oh, Bohwan, January 2002 (has links)
Thesis (Ph. D.)--Lehigh University, 2003. / In two parts. Includes vita. Includes bibliographical references (leaves 394-397).
|
556 |
Assessment of long-term corrosion resistance of recently developed post-tensioning componentsMoyer, Kevin Lee 30 October 2012 (has links)
The forensic analysis of fourteen post-tensioned beam specimens after six years of aggressive exposure testing is the focus of this thesis. Funding for this research came from TxDOT and FHWA. Current post-tensioning materials and construction practices have been deemed inadequate due to fairly recent corrosion failures. Recently developed post-tensioning components and systems were assessed to determine their suitability to prevent durability concerns that had been found in older structures. Testing was conducted on the following variables: Strand Type, Duct Type, Duct Coupler Type, Anchorage Type, Electrically Isolated Tendons. Non-destructive and destructive testing methods were used to study the specimens and were evaluated on their effectiveness in predicting corrosion. Service life analysis was done on a structure using the strands and ducts study in the project. Galvanized duct showed substantial pitting and area loss. The majority of the plastic ducts had no observed damage. However, tendon grout chloride concentrations in most cases were extremely elevated with both galvanized and plastic ducts. This indicated that moisture had entered the duct, through either the couplers and/or grout vents. Except for strands from one specimen, the strands had minor corrosion with occasional mild pitting. The exception had heavy mild pitting confined to a small portion of the strand due to a hole in the duct. Backfill quality was good but it did not bond well with the base concrete. Therefore, moisture and chlorides entered the anchorage region. The electrically isolated tendon did not perform as well as expected. The grout chloride concentrations and level of corrosion damage were comparable to the concentrations and corrosion damage from the more conventionally protected specimens. / text
|
557 |
An inquiry for the fabrication of funicular structuresHadilou, Arman 11 July 2013 (has links)
This paper describes a method for the design and fabrication of complex funicular
structures from discrete precast concrete elements. It has a critical look over
conventional casting methods and proposes a parametric casting mold to produce
concrete blocks with custom shapes.
The research proposes that through the integration of digital form-finding techniques,
computational file-to-fabrication workflows, and innovative sustainable
casting techniques, complex funicular structures can be constructed using prefabricated
elements in a practical, affordable, and materially efficient manner. / text
|
558 |
Development of rapid, cement-based repair materials for transportation structuresZuniga, Jose Ricardo 21 November 2013 (has links)
The deterioration of today's infrastructure particularly roadways and bridge decks has continued to increase over the years due to the larger axle loads, higher traffic volumes of densely populated cities. These highly congested areas have required the need to repair and rehabilitate the affected pavements in a timely manner with minimal traffic interruptions. Different rapid hardening binders were tested in this project to evaluate and characterize their performance when subjected to concrete distresses such as alkali-silica reaction, delayed ettringite formation, corrosion, freezing and thawing, salt scaling, sulfate attack, material incompatibility and volume changes. Among the cements tested were calcium aluminate cement, calcium sulfoaluminate cement, accelerated portland cement, alkali-activated fly ash, and three other proprietary blends available to the public. This thesis will summarize the preliminary findings of a comprehensive laboratory study focusing on rapid repair materials -- the final results of this study will be included in future publication (theses and final project report). / text
|
559 |
Serviceability performance of prestressed concrete buildings taking into account long-term behaviorYip, Hing-lun., 葉慶倫. January 2012 (has links)
A common problem faced by engineers nowadays is the restriction on structural member dimensions due to architectural and spatial concerns. Such restrictions have resulted in the use of high-strength concrete in vertical members to reduce sizes, the use of central core walls and peripheral columns to increase window areas, the use of prestressed concrete floors to increase spans, etc. Serviceability problems such as cracking may, however, arise in the long term if these problems have not received proper attention during the design stage.
This paper addresses several major issues associated with this type of buildings. Firstly, the differential axial shortening between the core walls and columns caused by large differences in stress levels will induce additional stresses and strains in the horizontal structural members, which are not normally accounted for in the traditional design methods. Secondly, the post-tensioning of concrete floors gives rise to additional internal forces induced in several ways such as time-dependent effects, sequential construction, and secondary “P-δ” effects of the high-strength slender columns. Thirdly, the soil-structure interaction could induce significant additional deformations and stresses in the buildings, although they are not always taken into account properly especially when carrying out simple or preliminary designs.
These issues are vital and should be carefully considered in regular structural analyses and designs. With the common practice that most of the designs of prestressed concrete building structures are sublet to prestressing specialists, common structural engineers seldom have the insight into the structural performance of these buildings. Furthermore, utilities for calculating steel relaxation, which is an important factor governing the behaviour of prestressed concrete buildings, and its interactions with other time-dependent effects of concrete are hardly found in popular commercial software packages developed for building designs. All of these problems present obstacles in the correct modelling of prestressed concrete buildings.
In the light of this, a practical but accurate method of modelling steel relaxation using the equivalent creep in commercial packages, that are normally good at dealing with complicated geometry, has firstly been developed in this work. The accuracy and reliability of the method are examined by comparing the results with available numerical solutions. Good agreement is observed.
Secondly, a series of studies have been carried out based on a typical prestressed concrete building to examine various effects on the structural performance. It is found that the most influential effect is the time-dependent behaviour. It induces extra column moments, differential axial shortening, losses of tendon stresses, and P-delta moments. The construction sequence and soil-structure interactions are also found to affect the structural performance but they are less critical compared with the time-dependent effects.
Finally, a parametric study has been carried out to evaluate the likely ranges of time-dependent effects on the structural behaviour. / published_or_final_version / Civil Engineering / Master / Master of Philosophy
|
560 |
Roles of water, paste and mortar film thicknesses in performance of mortar and concreteLi, Gu, 李古 January 2013 (has links)
Due to increasingly stringent requirements on concrete performance and complexity of our infrastructures, concrete with not only high strength but also all-round high performance is called for. This puts forth the notion of the so-called high-performance concrete (HPC). However, one major hurdle in the development of HPC is that the technology is still based largely on empirical approaches. For further advancement of concrete technology into concrete science, it is advocated to adopt a more scientific approach, which can improve our understanding of concrete from a level of “know -how” to a level of “know-why”.
The packing characteristics of solid particles have great influence on the performance of a concrete mix, but so far there is no generally accepted method of measurement. Herein, a new wet packing method was developed and applied to blended aggregates and concrete mixes. The results for blended aggregates revealed that whilst the packing density of coarse aggregate is only slightly higher under wet condition than dry condition, the packing density of a blended fine plus coarse aggregate is significantly higher under wet condition. Furthermore, the results for concrete mixes showed that the packing density is substantially higher and the filling effects of ultrafine supplementary cementitious materials are much better revealed under wet condition. Hence, the conventional dry packing method should be abandoned and replaced by the wet packing method.
It is well known that the fresh properties of paste/mortar/concrete are governed mainly by the mix parameters: water content, packing density and solid surface area. However, these mix parameters vary simultaneously and therefore their individual and combined effects are difficult to evaluate. It has been found recently by others that the combined effects of these parameters may be evaluated in terms of the water film thickness (WFT), which has the physical meaning of the average thickness of water films coating the solid particles. Herein, it was proposed that besides the WFT, the paste film thickness (PFT) and mortar film thickness (MFT) should also have effects on the performance of mortar and concrete. Extensive tests and correlations of the measured properties of mortar to the WFT and PFT revealed that whilst the WFT is the single most important factor governing the properties of mortar, the PFT also has significant effects, especially on the cohesiveness and adhesiveness. Likewise, the results for concrete revealed that whilst the WFT and PFT have significant effects on the properties of concrete, the MFT also has significant effects, especially on the cohesiveness and passing ability.
Based on the above findings, it may be concluded that the major factors governing the performance of concrete are the WFT, PFT and MFT. With the correlations of the various performance attributes of concrete to these factors so established, the door is open for the eventual development of a more scientific “three-tier mix design method” for HPC, by which the concrete mix is designed in three tiers: first the WFT of the paste portion, then the PFT of the mortar portion and finally the MFT of the concrete mix. / published_or_final_version / Civil Engineering / Doctoral / Doctor of Philosophy
|
Page generated in 0.0756 seconds