Diploma thesis deals with design and assessment of a ceiling of a library in Ostrava. The solved beamed ceiling is above the third floor. Static analysis of the structure was calculated by Scia Engineer 20 software. Two variants of ceiling was calculated. Thesis then focuses on prestressed ceiling.

The subject of the thesis is the development of project documentation for the construction of a nursing home in Zlín for clients who are unable to take care of themselves and need full day care. The nursing home is designed to stand alone in sloping terrain. The slope is used and the entrance to the first above-ground level is at the level of the modified terrain from Broučkova street and the entrance to the basement is also from the modified terrain. The building is designed with one underground floor and five upper floors. The circumferential and internal supporting masonry is designed from ceramic cut cinder blocks on the upper floors. Lost shuttering is used on the perimeter and vertical support structures, in the basement. Elevator shafts, ceiling structures and staircases are designed from monolithic reinforced concrete structures. The roof is an extensive green roof. The object is based on reinforced concrete strips. The object is insulated with the ETICS.

This diploma thesis deals with the control of the implementation of reinforced concrete structures. The theoretical part deals with the issues of this theme. There are presented individual work processes of the implementation of reinforced concrete structures, accesses of valid standards, used diagnostic methods and also inspection and test plans for cast-in-place reinforced concrete structure. The practical part is divided into three chapters. The first chapter applies with the most frequent defects in new reinforced concrete structures and two remaining chapters with the inspection of newly built structures for which arose misgivings about the quality of execution.

This diploma thesis deals with the preparation of the implementation of multifunctional buildings in Bratislava. These are three detached multi-storey apartment buildings connected by a joint basement. The diploma thesis includes a technical report to the construction technological project, a study of the implementation of main technological phases, solving of broader relations of transport routes with the design of supply routes, a time schedule and a financial plan of the object, a detailed time plan for the rough substructure and rough superstructure, a building site equipment project, a machine assembly design and its assessment, a technological regulation for monolithic structures, a control plan and test plan for monolithic structures, a specification of the time period of the removal of the formwork of monolithic structures, an occupational safety and health plan and selected points of the LEED certification. The thesis also includes a plan for securing resources for the rough structure with added schedules of workers, machines and building materials, a cost estimation budget of selected technological processes, a noise study, and a financial analysis of the expected investment profit.

The aim of the diploma thesis is the architectural design of the stadium for track cycling. It deals with a covered hall, which is located in the area of Komárov on the territory of the sports resort Hněvkovského. The urban design ofthe territory is elaborated simultaneously with the study of the hall. The resort offers a wide range of sport fields for recreational as well as top athletes, and the new velodrome hall should dominate the entire area. The buildingprovides background for the important cycling club TJ Favorit Brno. It also responds to the current requirements of track cycling and thus enables the organization of international races.

Prior to this thesis, there was a specialist course “Sport centre Za Lužánkami Brno”. This project was focused on planning of urbanism-architectural area with a mixture of renovated and new facilities with different functions for sport and leisure, together with professional sport opportunities. The emphasis was on collision-free paths for pedestrians and cyclists, clear transport links around the centre and terrain configuration of the area. The thesis follows on from this project, focusing on development between the hotel Bobycentrum in the South and the Lužánky swimming pool in the North. The idea of the proposal stems from the need to connect the development area to the existing network of pedestrian and cycle paths and the public transport system to minimise the use for individual car travel to the sport centre; and to connect existing and new facilities for leisure and sports. The Sport relax centre was designed with existing buildings in mind and partially follows their ground floor dimensions. The centre creates a barrier from the noisy and busy street and provides a calmer area for outdoor recreation. It fills a gap between the existing buildings and is encircled by a footpath at second level joining to the footbridges over Sportovní Street and the existing terrain in the north-western part. The footpath is ended by passageway between swimming pool and wellness centre. More and more people are looking for sport opportunities in cities however; there are still not enough quality grounds and facilities on offer. The facilities in this development are meant for regular trainings and recreation for the public, including parents with children, groups of friends as well as individual and team sports players, offering a range of day, evening and night activities both indoors and outdoors. Other facilities include outdoor changing rooms and sports equipment rental as well as spaces for meeting friends such as a restaurant, wellness and a dancing-hall.

This thesis deals with the construction process of the apartment house Ponavia Park located in Brno. The thesis solves the individual realization phases of the main building phase. Building site equipment is designed for the projected construction process in three different variations. A technical report is also included in the building site. Critical points within the transport of materials and machines are also verified. A financial plan for the whole building is made as an summarizing time schedule for the apartment building. The sources for the financial plan are the figures taken from the Czech building objects classifications (JKSO). The summarizing time schedule is made in MS Projekt software and it’s designed as a Gantt diagram. A design of the main building machines and mechanisms was also made for the projected construction process. All of the machines were assessed for their respective required function on the building site. Also included in this thesis is a construction method for the reinforced concrete structures. The construction method deals with the realization process of waterproof concrete, reinforcement binding, formwork of the vertical and horizontal structures and also the process of concrete curing. The construction method is followed up by quality control and test plans for reinforced concrete structures, and a construction site safety plan that is made in the form of predicted main safety risks at the building site. For the noise load on the surrounding buildings a noise study is made. The study examines the intensity of noise in the protected outdoor space. This study was made in the Hluk+ software. The thesis also includes an item budget for the apartment house that was made in Build Power S software.

In my diploma thesis I solved construction and technological project of the manufacturing hall in Valašské Meziříčí. In my final thesis I focused on reinforced concrete structure for manufacturing press. For tis construction I processed technological prescription, control and test plan, budget, scheldule and assembly detail. Further I wrote up financial plan and scheldule for whole building, hazards in the workplace plan, proposal machinery, budget and scheldule for main building, site equipment project. In my final thesis, I have also dealt with solving transport roof girder on building site.

The thesis is focused on the technological project of an indoor tennis hall construction in Uherský Brod. It is completely embracing the construction of the hall in terms of a carcass with its roofing. It reveals a technical report that describes the construction with reference to the used construction materials, positioning in the site and looking into its impact of the building on the environment. The following aim of the thesis is also a design of a machinery needed to implement the object. It also shows an assessment of machines and mechanization transport routes in terms of road traffic, a time and financial plan of construction, a draft and design of the equipment construction site, an analysis of economic costs of the construction, a material resources plan for the construction, a technological regulation of a flat roof and a quality test scheme along the construction.

The subject of this thesis is a construction technology project object Yacht Club Hlučín. The basis for the elaboration of this work is the diploma thesis from Ing.Radim Kučera - Yacht Club Hlučín. This thesis includes technical report construction technology project, coordinating the situation with the construction of wider relations of routes for transportation of main materials, time and financial plan of the construction according to the technical-economic indicators, drawing building equipment, scheduling, inspection and test plan, technological regulation for the implementation of the gross substructure, itemized budget and the plan for OSH implementation in Yacht club Hlučín.