A pesquisa teve como objetivo estudar procedimentos para a condução dos testes de deterioração controlada, envelhecimento acelerado, condutividade elétrica e lixiviação de potássio, procurando-se verificar sua eficiência para identificação de diferentes níveis de vigor de lotes de sementes de melão (Cucumis melo L.). Para tanto, o estudo foi conduzido em duas etapas, utilizando-se cinco lotes de sementes dos híbridos AF-646 e AF-682. Na primeira foram realizados os testes de germinação, primeira contagem de germinação, Método Agroflora, emergência de plântulas em casa de vegetação e estudos específicos para os testes de deterioração controlada (graus de umidade de 18%, 21% e 24%, a 45ºC, durante 24 e 48 horas), de envelhecimento acelerado, com e sem solução salina (períodos 48, 72 e 96 horas, a 38ºC ou 41ºC), de condutividade elétrica (temperaturas de 20ºC, 25ºC e 30ºC, volumes de 50 e 75mL de água, 25 e 50 sementes e períodos de 1, 2, 4, 8, 12, 16, 20 e 24 horas) e de lixiviação de potássio (25 e 50 sementes, 50 e 75mL de água, a 25ºC e 30ºC, durante 30, 60, e 90 minutos, 2h, 2h e 30 minutos, 3, 4 e 5 horas). Os procedimentos considerados mais promissores para cada teste, nesta primeira fase, foram comparados na segunda etapa, que também incluiu os testes de germinação, primeira contagem de germinação, Método Agroflora e emergência de plântulas em casa de vegetação. Diante dos resultados obtidos, concluiu-se que os testes de deterioração controlada (24%/45ºC/24h) e de envelhecimento acelerado (procedimento tradicional e com solução salina), utilizando a combinação 41ºC/72h, apresentam sensibilidade suficiente para avaliação do potencial fisiológico de sementes de melão. O teste de condutividade elétrica não constitui em opção eficiente para avaliação do vigor das sementes, enquanto o teste de lixiviação de potássio necessita de estudos adicionais para adequar sua metodologia e viabilizar a sua utilização para sementes de melão, considerando-se, inclusive, os prováveis efeitos do genótipo. / This research was conducted to study and select procedures for the controlled deterioration, accelerate aging, electrical conductivity and potassium lixiviation tests, to verify their sensitivity to identify different vigor levels of melon (Cucumis melo L.) seed lots. Five seed lots each from the hybrids AF-646 and AF-682 were used. In the first experimental stage, the following tests were performed: germination, germination first count, Agroflora Method and seedling emergence. Specific studies were also conducted to the following tests: controlled deterioration (seed moisture content of 18%, 21% and 24%, at 45ºC, for 24 and 48 hours), traditional accelerated aging, saturated salt accelerated aging (for 48, 72 and 96 hours, at 38 o C or 41 o C), electrical conductivity (25 or 50 seeds imbibed in 50mL or 75mL water, 20 o C, 25 o C and 30 o C, for 1, 2, 4, 8, 12, 16 and 20 hours) and potassium leachate (25 or 50 seeds, imbibed in 50mL and 75mL, at 25 o C and 30 o C, for 30, 60, 90, 120, 150, 180, 240 and 300 minutes). The procedures considered the most promising for each test in the first stage were compared, in the second stage. The later stage also included germination, germination first count, Agroflora Method and seedling emergence tests. From the results, it was concluded that controlled deterioration (24%/45 o C/24h) and accelerate aging (traditional procedure and salt saturated) tests, using the 41 o C/72h combination, showed to be sufficiently sensitive for the evaluation of the physiological potential of melon seeds. The electrical conductivity test does not constitute an efficient option for the vigor evaluation, while the potassium lixiviation test needs further studies in order to adjust its methodology and enable its use for melon seeds, also considering the probable genotype effects.

A pesquisa teve como objetivo estudar procedimentos para a condução dos testes de deterioração controlada, envelhecimento acelerado, condutividade elétrica e lixiviação de potássio, procurando-se verificar sua eficiência para identificação de diferentes níveis de vigor de lotes de sementes de melão (Cucumis melo L.). Para tanto, o estudo foi conduzido em duas etapas, utilizando-se cinco lotes de sementes dos híbridos AF-646 e AF-682. Na primeira foram realizados os testes de germinação, primeira contagem de germinação, Método Agroflora, emergência de plântulas em casa de vegetação e estudos específicos para os testes de deterioração controlada (graus de umidade de 18%, 21% e 24%, a 45ºC, durante 24 e 48 horas), de envelhecimento acelerado, com e sem solução salina (períodos 48, 72 e 96 horas, a 38ºC ou 41ºC), de condutividade elétrica (temperaturas de 20ºC, 25ºC e 30ºC, volumes de 50 e 75mL de água, 25 e 50 sementes e períodos de 1, 2, 4, 8, 12, 16, 20 e 24 horas) e de lixiviação de potássio (25 e 50 sementes, 50 e 75mL de água, a 25ºC e 30ºC, durante 30, 60, e 90 minutos, 2h, 2h e 30 minutos, 3, 4 e 5 horas). Os procedimentos considerados mais promissores para cada teste, nesta primeira fase, foram comparados na segunda etapa, que também incluiu os testes de germinação, primeira contagem de germinação, Método Agroflora e emergência de plântulas em casa de vegetação. Diante dos resultados obtidos, concluiu-se que os testes de deterioração controlada (24%/45ºC/24h) e de envelhecimento acelerado (procedimento tradicional e com solução salina), utilizando a combinação 41ºC/72h, apresentam sensibilidade suficiente para avaliação do potencial fisiológico de sementes de melão. O teste de condutividade elétrica não constitui em opção eficiente para avaliação do vigor das sementes, enquanto o teste de lixiviação de potássio necessita de estudos adicionais para adequar sua metodologia e viabilizar a sua utilização para sementes de melão, considerando-se, inclusive, os prováveis efeitos do genótipo. / This research was conducted to study and select procedures for the controlled deterioration, accelerate aging, electrical conductivity and potassium lixiviation tests, to verify their sensitivity to identify different vigor levels of melon (Cucumis melo L.) seed lots. Five seed lots each from the hybrids AF-646 and AF-682 were used. In the first experimental stage, the following tests were performed: germination, germination first count, Agroflora Method and seedling emergence. Specific studies were also conducted to the following tests: controlled deterioration (seed moisture content of 18%, 21% and 24%, at 45ºC, for 24 and 48 hours), traditional accelerated aging, saturated salt accelerated aging (for 48, 72 and 96 hours, at 38 o C or 41 o C), electrical conductivity (25 or 50 seeds imbibed in 50mL or 75mL water, 20 o C, 25 o C and 30 o C, for 1, 2, 4, 8, 12, 16 and 20 hours) and potassium leachate (25 or 50 seeds, imbibed in 50mL and 75mL, at 25 o C and 30 o C, for 30, 60, 90, 120, 150, 180, 240 and 300 minutes). The procedures considered the most promising for each test in the first stage were compared, in the second stage. The later stage also included germination, germination first count, Agroflora Method and seedling emergence tests. From the results, it was concluded that controlled deterioration (24%/45 o C/24h) and accelerate aging (traditional procedure and salt saturated) tests, using the 41 o C/72h combination, showed to be sufficiently sensitive for the evaluation of the physiological potential of melon seeds. The electrical conductivity test does not constitute an efficient option for the vigor evaluation, while the potassium lixiviation test needs further studies in order to adjust its methodology and enable its use for melon seeds, also considering the probable genotype effects.

京都大学 / 0048 / 新制・論文博士 / 博士(地球環境学) / 乙第12827号 / 論地環博第7号 / 新制||地環||24(附属図書館) / 31314 / (主査)教授 勝見 武, 教授 三村 衛, 准教授 乾 徹 / 学位規則第4条第2項該当 / Doctor of Global Environmental Studies / Kyoto University / DFAM

This work examines the selective deposition of metallic and semiconductor materials onto DNA templates for the fabrication of nanodevices. DNA origami provides a simple and robust method for folding DNA into a variety of shapes and patterns and makes it possible to create the complex templates needed for nanodevices, such as nanoelectronic circuits, plasmonics, and nanosensors. Metallization of DNA origami templates is essential for the fabrication of such nanodevices. In addition, selective deposition of semiconductor materials onto the DNA template is of importance for making many nanodevices such as nanocircuits. Metallization of DNA origami presents several challenges beyond those associated with the metallization of other DNA templates such as λ-DNA. All of these challenges were addressed in this study. DNA origami templates were seeded with Ag and then plated with Au via electroless deposition. Selective continuous metal deposition was achieved, with an average metallized height as small as 32 nm. The structure of T-shaped DNA origami was also retained after metallization. Following the metallization of complete origami, site-specific metallization of branched DNA origami was also demonstrated. To achieve this, staple strands at select locations on origami were replaced with staple strands modified with binding sites at the end. These binding sites then attached to thiolated DNA coated Au nanoparticles through base pairing. The continuous Au nanowires formed at designated sites on DNA origami after Au plating had an average width of 33 nm, with the smallest ones ~20 nm wide. The continuity of nanowires was verified by conductivity tests- the only tests of this nature of which I am aware. Moreover, predesigned sites on "circuit-shaped" DNA origami were successfully metallized. The selective deposition of a variety of materials onto DNA templates for the formation of continuous DNA-templated nanowires was also demonstrated. Specifically, an electroless Ni plating solution was developed to enable the fabrication of uniform and continuous DNA-templated Ni nanowires. Tests showed that these DNA-templated Ni nanowires were conductive. Moreover, continuous DNA-templated Bi2Te3 and/or Te nanowires have been fabricated through galvanic displacement of DNA-templated Ni and Cu nanowires. Altogether, these results represent important progress toward the realization of DNA-templated nanofabrication.

The cold test is one of the oldest and most acceptable vigour tests as it is used to simulate stress conditions commonly occurring in the field. In recent years, some of South Africa’s top maize hybrids, with high cold test scores, have shown emergence problems under cold, wet planting conditions. It resulted in major complaints from commercial maize producers with sizable claims involved. Therefore, the need arose to find a more sensitive vigour test that takes into account cold, wet conditions. In practice, South African maize producers would not plant if it is too cold and wet. However, cold, wet conditions are commonly experienced during planting time in the main maize production regions of South Africa, especially during October and even November. Furthermore, in most of the commercial maize production areas, such as the western Free State, chances of thunder and hailstorms are high during the planting period. These weather conditions are major causes for sudden drops in temperature and flooding which can expose maize seed and emerging maize seedlings to stress conditions The effects of cold, wet conditions on germination and emergence of nine maize hybrids were investigated in laboratory, glasshouse and field experiments. Growth chamber and glasshouse experiments were conducted under 10°C, 20°C and 30°C and 0, 24, 48 and 72 hours flooding. Field experiments were conducted under different climatic conditions, resulting in cool and wet, cold and wet and favourable conditions during planting. The objectives were to investigate the correlations between different laboratory vigour tests and field emergence of maize hybrids under cold, wet conditions in order to identify the most suitable laboratory vigour test for predicting field emergence under cold, wet conditions. Eight different vigour tests were conducted and each was compared with field emergence under cold, wet conditions. The eight tests conducted, were the cold test, soak test, complex stressing vigour test, electrical conductivity test, accelerated ageing test, tetrazolium test, fast green test and emergence rate test. The soak test was the most sensitive vigour test when considering cold, wet conditions, as it measures seed germination, based on the warm test, after a 48 hour soak in water at 27°C. Correlations found between the soak test and field emergence (53%) under cold, wet conditions was unexpected, since the soak test does not account for low temperatures. The complex stressing vigour test was conducted to study the effect of fluctuating soaking temperatures on germination of maize seed. Seeds of nine maize hybrids were soaked for 48 hours at a moderate temperature (25°C), followed by another 48 hours soak at a low temperature (5°C), and then planted in sand and grown for 4 days at 25°C, before evaluation. Highly significant correlations were found between the complex stressing vigour test and simulated field emergence under both controlled conditions in a glasshouse (89.9%) and cold, wet conditions in the field (90.0%). The complex stressing vigour test was the best test to predict field performance under a wide range of climatic conditions, especially cold, wet conditions. Implementation of the complex stressing test as a routine vigour test, will be to the advantage of maize seed companies, especially in being proactive in predicting emergence of maize hybrids under cold, wet conditions. Copyright / Dissertation (MSc(Agric))--University of Pretoria, 2009. / Plant Production and Soil Science / unrestricted