Collagen is one of the most important and abundant proteins in mammals. It consists of three left-handed PPII helixes coiled along a common axis to form a very compact right-handed super helix. The primary structure is shown to be (Gly-Xaa-Yaa)n repeats with high content of prolyl residues at both Xaa and Yaa positions. <i>Cis-trans</i> isomerization of the prolyl amide bonds is one of the rate-limiting steps during collagen triple helix folding. The conformationally locked alkene isosteres Fmoc-Gly-Ψ[(E)CH=C]-Pro-Hyp(tBu)-OH and Fmoc-Pro-Ψ[(E)CH=C]-Pro-OH were designed and synthesized. The synthesis of the Gly-Pro isostere had no stereo-control, and the two diastereomers of the tripeptide isostere Fmoc-Gly-Ψ[(E)CH=C]-Pro-Hyp(tBu)-OBn were separated by normal phase HPLC. Although the stereoselectivity of the asymmetric reduction was not good for the Pro-Pro isostere, the resulting diastereomers was separable by flash chromatography, and the absolute stereochemistry of the two diastereomers was determined by Mosher's method. The Gly-Pro alkenyl peptides, and their control peptide Ac-(Gly-Pro-Hyp)8-Gly-Gly-Tyr-NH2 were synthesized and purified. All three peptides showed a maximum around 225 nm and a minimum close to 200 nm in the CD spectra, which indicated the formation of PPII helixes. The Tm value of the control peptide was determined to be 50.0 °C. The peptide with Gly-Ψ[(E)CH=C]-L-Pro-Hyp as the guest triplet formed a stable triple helix with a Tm value of 28.3 °C. The peptide with Gly-Ψ[(E)CH=C]-D-Pro-Hyp as the guest triplet showed a linear decrease in the ellipticity with increasing temperature, which indicated that no triple helix was formed. The Pro-Pro alkenyl peptide and its control peptide H-(Pro-Pro-Gly)₁₀-OH were synthesized and purified. The T_m value of control peptide was determined to be 31.6 °C by extrapolation to 0 M TMAO in PBS buffer, which was very close to the measured value of 31.5 °C. The Pro-Pro alkenyl peptide began to show a maximum around 225 nm in the CD spectra when the concentration of TMAO was higher than 2.5 M. After extrapolation to 0 M TMAO, the T_m value was determined to be –22.0 °C. These results indicate that the backbone inter-chain hydrogen bond is one of the major forces in stabilizing the collagen triple helix, while <i>cis-trans</i> isomerization has limited contribution. The intrinsic properties of the amide bond may have huge influence on the stability of the collagen triple helix. The helix-turn-helix motif is an important tertiary structure in DNA-binding proteins. Stepwise modifications of the Antennapedia HTH peptide (27-55) were performed to improve the helicity and stability. The peptide with more side-chain ion-pairs was over 4 times more helical than the native Antp peptide, while the Ala-based peptide was over 9 times more helical than the native peptide. A 12-membered ring, Fmoc-protected HTH-turn mimic was designed and synthesized, and was ready for solid phase peptide synthesis. The solubility of the cyclic peptide was very poor, and the purification of the final product was very difficult. The solubility problem might also affect solid phase peptide synthesis in the future. / Ph. D.

Collagen is one of the most abundant human proteins. It exists as a right-handed superhelix called the triple helix. The triple helix consists of three left-handed polyproline type II (PPII helices) that intertwine around a common axis. Each PPII helix has the repeating peptide sequence (Gly–Xaa–Yaa)n with a high content of (2S)-proline (Pro) in the Xaa position (ca. 28%) and (2S,4R)-hydroxyproline (Hyp) in the Yaa position (ca. 38%). Unique to the prolyl amide is the ease of cis-trans isomerization. Since the triple helix necessitates that all peptide bonds be in the trans conformation, isomerization is the rate-limiting step in collagen folding. However, eliminating isomerization with a trans-locked alkene isostere destabilizes collagen-like peptides. Collagen is stabilized by electronic interactions, namely the n→π* interaction. Halo-alkene isosteres may be used to recapture these electronic interactions and stabilize a collagen-like peptide. An in-depth conformational analysis was conducted at the MP2/6-311+G(2d,p) level of theory to determine the viability of conformationally-locked halo-alkene isosteres. Fluoro-alkenes and chloro-alkenes were modeled at both the Gly–Pro and Pro–Pro (as a Pro–Hyp mimic) amide positions. Compared to the collagen crystal structure PDB ID: 1K6F, we found the fluoro-alkenes were closer geometric matches to both Gly–Pro and Pro–Pro than the corresponding chloro-alkenes. The chloro-alkene was predicted to have stronger n→π* interactions. The trans-locked proteo-alkene was also analyzed to understand why it destabilized the triple helix. We found that these models had other local minima close to the desired PPII geometry, likely leading to enhanced backbone flexibility. This deleterious flexibility was not predicted for either fluoro-alkene or chloro-alkene models. The conformationally-locked halo-alkene isostere Fmoc–Gly–Ψ[(Z)CF=C]-Pro–Hyp(tBu)–OH was designed and synthesized as a (Z)-fluoro-alkene Gly–Pro isostere. We used the chiral catalyst, L-Thr, for asymmetric aldol addition to cyclopentanone, which inadvertently enhanced the yield of the wrong enantiomer, in contrast with aldol addition to cyclohexanone. A Mg2+-promoted Horner-Wadsworth-Emmons reaction afforded the (Z)-fluoro-alkene over the (E)-fluoro-alkene in about a 2:1 ratio. The two diastereomers, Fmoc–Gly–Ψ[(Z)CF=C]-L-Pro–Hyp(tBu)–OH and Fmoc–Gly–Ψ[(Z)CF=C]-D-Pro–Hyp(tBu)–OH were separated by supercritical CO2 chromatography. The collagen-like peptides Ac–(Gly–Pro–Hyp)3–Gly–Ψ[(Z)CF=C]-L-Pro–Hyp–(Gly–Pro–Hyp)4–Gly–Gly–Tyr–NH2, Ac–(Gly–Pro–Hyp)3–Gly–Ψ[(Z)CF=C]-D-Pro–Hyp–(Gly–Pro–Hyp)4–Gly–Gly–Tyr–NH2, and the control peptide Ac–(Gly–Pro–Hyp)8–Gly–Gly–Tyr–NH2 were synthesized on solid-phase resin. The CD spectra of all three peptides showed the characteristic collagen triple-helix signature. The folding stability was determined by thermal melting (Tm). The peptide with the fluoro-alkene guest, Gly–Ψ[(Z)CF=C]-L-Pro–Hyp, was found to have a Tm value of 42.2 °C. The Tm of the control peptide was found to be 49.0 °C, a difference in stability of only ΔTm –6.8. Thus, the (Z)-fluoro-alkene as a Gly–Pro isostere forms a relatively stable triple helix. The peptide with the Gly–Ψ[(Z)CF=C]-D-Pro–Hyp guest was shown to have a linear relationship between ellipticity and temperature, indicating that a stable triple helix did not form. The enhanced stability of the (Z)-fluoro-alkene compared to the (E)-alkene Gly–Pro isostere (Tm = 28.3 °C) may be due to a stabilizing n→π* interaction, as determined by NMR deshielding of the 19F nucleus in the collagen-like peptide. In biological systems, isomerization of the prolyl amide is catalyzed by enzymes called PPIases. The PPIase Pin1 specifically catalyzes isomerization of the pSer–Pro sequence from the cis-conformation to the trans-conformation. Pin1 plays a crucial role in the G2→M transition of the cell cycle, implying the importance of cis-trans isomerization. The dipeptides H–Ser–Ψ[(Z)CH=C]-Pro–OH, H–Ser–Ψ[(E)CH=C]-Pro–OH and native H–Ser–Pro–OH were synthesized by literature methods, and activated for aminoacylation of tRNACUA for in vitro transcription-translation. Aminoacylation by chemical methods required the synthesis of a pdCpA dinucleotide. Formation of the dipeptide-dinucleotide complex was not completed because protection of the Ser side chain was problematic. On the other hand, conversion of the dipeptide into the 3,5-dinitrobenzyl ester conjugate allowed for enzymatic aminoacylation using the dFx flexizyme, an RNA enzyme. The native dipeptide was successfully coupled to tRNACUA and is ready for incorporation into a full-length Bora protein by in vitro transcription-translation. Both cis- and trans-locked alkene mimics have been converted to their respective 3,5-dinitrobenzyl ester conjugates. / Doctor of Philosophy / The proline amide (Xaa–Pro) in peptides and proteins is unique in that it allows for cis-trans isomerization. The triple-helix region of human collagen consists mostly of the repeating sequence (Gly–Pro–Hyp)n. Xaa–Pro amide-bond isomerization is rate-limiting for triple-helix formation. We eliminated isomerization at one position in a collagen-like peptide with a locked alkene mimic of Gly–Pro to attempt to stablize the triple-helix. Our computational results predicted that a fluoro-alkene Gly–Pro isostere would be a close geometric match for the native amide. Experimental results showed that a collagen-like peptide with a fluoro-alkene Gly–Pro isostere has an unfolding temperature that is 6.9 °C lower than the native control peptide. 19F NMR data of the collagen-like peptide shows a surprising deshielding of the fluorine nucleus, suggesting its participation in a stabilizing n→π* electronic interaction, similar to the native amide. Isomerization also plays a key role in proper cell division. We followed established methods to synthesize the cis- and trans-locked alkene mimics of Boc–Ser–Pro–OH and converted them into the 3,5-dinitrobenzyl ester conjugates. The 3,5-dinitrobenzyl ester is recognized by the dinitrobenzyl flexizyme (dFx) for enzymatic aminoacylation of tRNA. Once the alkene isosteres are aminoacylated, they will be incorporated into a full-length cell cycle regulatory protein called Bora to determine whether the cis- or trans-Pro state is necessary for healthy human mitosis, and which results in cancerous human mitosis.