The metal halide lamp has become an attractive lighting source because of its compact size, good color rendering, long lamp life, and high luminous efficacy. As a member of high-intensity discharge lamps, it has a negative incremental resistance, which claims the necessity of a ballast circuitry. Similar to other gas discharge lamps, the operating performance can be further improved when driven by a high-frequency electronic ballast. However, there are some obstacles in ballasting the metal halide lamp with the high-frequency inverter. For a cold lamp, an ignition voltage up to several kVs is required for breaking down the electrodes during starting period. The breakdown voltage and the equivalent lamp resistance may vary from time to time and lamp to lamp, and is sensitive to the used time. Furthermore, the ignition voltage for restarting a hot lamp can be ten times that for a cold lamp. On the other hand, the lamp driven by a high-frequency electronic ballast may suffer from acoustic resonance. All these make it difficult in the design of an electronic ballast, especially for the applications with hot restarting. In this dissertation, the operating characteristics for both starting transient and steady-state of the metal halide lamp are first investigated. Then, a simple method by measuring the lamp voltage is proposed to detect the happening of acoustic resonance. Based on the investigated results, several electronic ballasts are designed for driving metal halide lamps with capabilities of wide input voltage range, high input power factor, hot restarting, fast transition. In addition, an inverter circuit is configured for ballasting multiple lamps. A buck-boost power-factor-correction circuit is integrated into the load resonant inverter to achieve a high power factor, fast transition, and constant power operation. The extremely high ignition voltage for hot restarting is generated by an auxiliary ignitor. The electronic ballast is precisely operated at the specific frequency at which acoustic resonance will not occur. In addition to these features, a protection circuit is included to prevent from high voltage and/or current stresses on circuit components in case that the lamp fails to be started up or comes to the end of its life-time. For the ballast with multiple lamps, the load circuits with abnormal lamps can be isolated from the others which are under normal operation. Prototypes of the proposed circuits are built and tested. Experimental results present the satisfactory performances.