My diploma thesis deals with design of the bridge number 202 on expressway in Slovakia. The bridge leads across the road number I50 (between Trenčín and Bánovce nad Bebravou) and railway number 130 (between Trenčín and Chynorany). For each course there is a separate super-structure. Only left super-structure is considered for the work. The box girder with four spans is chosen from three variations. This bridge is designed according to limit states, construction´s influence on design is taking into consideration. Structural model of construction is made as a spatial bar model. Structural analysis, well arranged drawings and visualization are elaborated in this thesis too.

The task of the thesis is to design composite steel-concrete bridge consisting of four spans. Student will design two versions – continuous beam and four simple supported beams.

The subject of this bachelo r’s thesis is the design a new supporting bridge construction in Prešovský kraj, district Levoča the territory of Slovak Republic. This object is located on the highway D 26,5/120, at kilometer 13,499 795 and communication of third class – 131-00 bridges. The objective is the design of a perpendicular four-span construction, which is proposed in three variants. The first variant is a chamber girder with inclined walls from post-tensioned concrete height 2,480 m. The second variant is composed of two beamed cross-section and the third variant is composed of one beamed cross-section. For detailed assessment the first variant was chosen with a length of bridging of 166,000 m. The calculation of load effects is done by software Scia Engineer and compared with a manual calculation according to current standards. This bridge is designed according to limit states, construction´s influence on design is taking into consideration. Structural analysis, well arranged drawings and visualization are elaborated in this thesis too.

This diploma thesis deals with the design of the bridge o the road I/58 over a watercourse and dirt road. The main content is the design and calculation of a continuous bridge structure with two bays. During designing the bridge, I based on Czech and European standards especially ČSN EN 1991 and ČSN EN 1992. A two-beam structure was selected from the developed three variants of bridging. Drawing documentation, construction procedure, visualization and static calculation were prepared for it. The result is an economical bridge structure with high durability and almost maintenance-free operation.

The Diploma thesis deals with design and static assessment of timber footbridge structural system for pedestrians and cyclist across the Trebuvka river in Lostice on the site of the existing footbridge. Structural system is designed in two alternatives and assessed according to the current standards. Spans of the bridge are 2x18 m and 1x6 m. The main beams are made of glued laminated timber, other parts of the structure are made of timber and steel elements. First alternative is designed as a simple half-through truss beam, second alternative as continuous beam with variable height where the deck is sitting on top of the girders.

This Master's thesis deals with the detailed design of the supporting structure of the bridge with two sections, with the rise in the direction of the intermediate support, and cross-cut single-beam construction. The supporting structure is designed from the prestressed concrete, prestressing losses are accurately quantified. It also deals with the assessment of pillar base threshold and pilot groups. The assessment was carried out according to the limit states.

This thesis mainly deals with modeling and static analysis of the ceiling structure in the basic environment of ANSYS. The first part is focused on verifying correctness of the model most stressed parts of the structure with a simple hand-static calculation by the process of stress on a continuous beam. The main part is devoted to modeling composite structure, element types, specifying loads and boundary conditions by ANSYS FEM program. In the end, there are the results of stress and deflection presented, and the structure is evaluated at the ultimate limit state and serviceability limit state.

The aim of the Diploma Thesis is elaboration of study of bridge crossing over the Svitava river and ČD railway track in Blansko. It concerns a five-pole steel beam road bridge with through-span which carries road of the third category. The static system of the construction is solved as solid-web beam of 1.3 meters height which is in three middle spans reinforced by truss construction with top chord and system of diagonals without verticals. The height of the main beam where reinforced by trusswork is 4.75 meters. The width of spans in the road axis is 18.5 + 30.525 + 44.4 + 30.525 + 18,5 metres. The bridge deck consists of steel cross beams bonded with reinforced concrete slab of 200 millimeters of thickness. The drive-through width of the roadway is 7.0 meters. The bridge is fitted with right-sided walkway placed on steel cantilevers. The walk-through width of the walkway is 3.0 meters. Material used is S355 Steel, C30/37 Concrete and S460 Steel which is used for marginal spans of the bridge. Load-bearing construction is assessed in compliance with current technical requirements laid down by European Directives, so called “Eurocodes”. The calculation of inner powers is performed using the Scia Engineer 2013.1 software.

The Diploma’s thesis deals with the design of selected parts of reinforced and prestressed concrete structure. Internal forces were solved by software SCIA ENGINEER. Prestress concrete element was solved by module TDA. Phases of construction were considered. Detailed solution is focused on the design of reinforced concrete floor slab with joists within the basement, reinforced concrete beam with five spans within the basement, reinforced girder within the basement, reinforced column within the basement, reinforced footing and prestressed concrete joist within the basement. Drawings of shape and drawings of reinforcement are included in this thesis. Other elements of construction were not solved in this thesis.

The aim of the master’s thesis was t odevelop alternative solutions supporting steel structure of the railway bridge on the undermined area. The range of single fields were chosen based on the location of existing substructures. Reducing the width of bridge openings were not allowed. Based on the geodetic survey plans were drawn up clear of the current state. On the basis of specifications for developing a detailed process was chosen variant Gerber’s beam reinforced with an arch in mean field. For this variant was performed structural analysis of the main parts of the main structure of the bridge, which was calculated with the effects of undermining. For variant Gerber’s beam were made clear drawings and drawing details of the selected steel bridge construction (new state). Further, detailed analysis of selected structural detail was made. Specifically, connecting rod to the main beam, which was designed optimal shape and thickness of the joints plate with a suitable radius of the firing to avoid plastification of the material in this area. Variant of the continuous beam without joints was prepared to. It has been observed, what is the effect of undermining on the stress in the construction of the bridge - was confronted with the effects on Gerber’s beam. To reduce stress in the construction of the bridge and compliance of ultimate state of applicability of the main beam has been designed bearing adjustment and after considering several options its implementation too. The economic comparison between the two variants was conducted. The assembling procedure was designed for both types of bridge structures. In the technical report we can read about due to the intention of building a new bridge and further we can find there other important technical information. In conclusion of the master’s thesis there has been recommended for the construction specific variant – from the perspective of an investor, and from the static aspect-view of the designer.