The aim of this work is optimalisation of induction furnace in foundry for company PROMET FOUNDRY a.s. The company has two induction furnances. There are installed as identical construction. They have 2 modes of operation. First mode is founding and second mode is mode, where is temperature in maintain mode. Only one induction furnance can work in the founding mode at a time though. Inducion furnances are in the single-phase connection and they cause unbalance in the distribution network. Near the foundry there is a small network area whitch it is operated by company Zásobování teplem Vsetín a.s. The consumption of electrical energy in foundry so big, that in the year 2009 was made elaborate for Zásobování teplem Vsetín a.s. It was write at Laboratoře diagnostiky výkonů (Laboratory of performance diagnostics), which is a part of Electrotechnic Department at Technical Univarsity of Ostrava. The ordered study was named “Verification of causes of increased reactive energy consumption during transition from electricity delivery to electricity consumption”. The conclusion of this assignment confirms that in distribution network in the Jiráskova area in Vsetín there is unbalance of electrical energy and there is high part of reactive power. The next conclusion is crucial to find the customer who made the unbalance and to set relevant remedy. The last step will be the identification whether such device can actually be effectively balanced. It was subsequently proved that the Promet Foundry was causing the unbalance and that balanced consumption would be reasonable. Promet Foundry thus addressed Autel a.s. company with an inquiry to make a study of removing the causes of the unbalance which is caused by current induction furnaces operation at a minimum possible cost, least possible influence on the performance and minimum construction changes concerning the building. In this thesis there will be some topics. The result of which will be introducing of used heating technology, introducing of company and of effective plant performance and subsequent suggestions of possible unbalance removal or reactive power decrease. Several ways which are being implemented in the industry in order to balance consumption will be described. A suitable balancing plant will be subsequently chosen and its parameters will be calculated.

This diploma thesis deals with design, realization and analysis of security and surveillance systems for buildings and spaces containing advanced components. One of the main design's parts is dedicated to intruder alarm system, access system, attendance and CCTV systems with the possibility of automatic motion tracking. Controlling and monitoring of particular subsystems is possible both locally and remotely from a computer via a web interface or by means of a software. The access to camera system from a mobile phone is also possible. IAS/ACS systems also enable controlling and transferring information about their state via SMS. The designed system was realized completely and its operating was demonstrated. The realization is described in detail including illustration of configuration of particular components. A security analysis and a possible future development of the project is summarized in the conclusion.

This project deals with given safeguard possibilities, both mechanical and electronic. A row house with garden was chosen for being secured. Subsequently, were elaborated two`s proposals of securing and guarding of this object. First, was based on camera`s system and second on common system ESS. Later on they were evaluated and the most considerable benefits were emphasized. A system based on control panel with connected detectors was selected upon specification. Subsequently was created a model of the chosen system, at which the required behaviour was simulated and verified. An outline of an implementation was created in the C language.