This thesis describes a novel "Tablet-in-a-Bottle" oral suspension formulation. Ingredients with unstable physical or chemical characteristics can be placed in a core tablet, and then dry compression coated with an outer layer which provides separation from other components. The new suspension formulation comprises fast disintegrating clavulanic acid (KCA) tablets with a powder mixture containing amoxicillin. Hardness, friability, flow properties and weight uniformity of tablets for three different formulations were investigated and were all improved in a third formulation. Stability tests under different humidities were conducted. Amoxicillin and clavulanic acid in the new formulations showed the same stabilities when compared with the marketed product Augmentin��. Preliminary pharmacokinetics and bioavailability of one new formulation were evaluated by comparing in vitro release rates and in vivo urinary excretion rates. In vitro dissolution studies were carried out according to the USP XXIII paddle method. The new formulation showed faster release rates during the first hour when stirring speed was 25 rpm. However, when 75 rpm stirring speed was applied, the dissolution profiles for the new formulation and the reference marketed product were identical. A randomized two-way crossover bioequivalence study was designed to evaluate the bioavailabilities. Cmax, Tmax and AUC[subscript o--->t] of amoxicillin were within ��20% of the reference pharmacokinetic values. However, Cmax and Tmax of clavulanate were not within ��20%. Bioeqivalence between this new suspension formulation and the marketed product (Augmentin��) were evaluated using a two one-sided t-test. There is not sufficient statistical support with this test to conclude that the two products are bioequivalent. However, this is most likely due to small sample size and high intersubject variation and statistical support for bioequivalence is expected in a larger study group. / Graduation date: 1998

Bibliography: p. 171-173.

L.D. Smullin and W.N. Coffey. / "November 12, 1948." / Bibliography: p. 14. / Army Signal Corps Contract No. W36-039-sc-32037 Project No. 102B. Dept. of the Army Project No. 3-99-10-022.

A multidisciplinary literature survey revealed that copolymeric nanoparticles could be applied in various technologies such as the production of paint, adhesives, packaging material and lately especially drug delivery systems. The specialized application and investigation of copolymers in drug delivery resulted in the synthesis of two series of copolymeric materials, i.e. poly(styrene-co-methyl methacrylate) (P(St-co-MMA)) and poly(styrene-co-ethyl methacrylate) (P(St-co-EMA)) were synthesized via the technique of o/w microemulsion copolymerization. These copolymers have not as yet been utilized to their full potential in the development of new drug delivery systems. However the corresponding hydrophobic homopolymer poly(styrene) (PS) and the hydrophilic homopolymer poly(methyl methacrylate) (PMMA) are known to be biocompatible. Blending of homopolymers could result in novel applications, however is virtually impossible due to their unfavorable mixing entropies. The immiscibility challenge was overcome by the synthesis of copolymers that combined the properties of the immiscible homopolymers. The synthesized particles were analyzed by gel permeation chromatography combined with multi-angle laser light scattering (GPC-MALLS) and attenuated total reflectance Fourier infrared spectroscopy (ATR-FTIR). These characterizations revealed crucial information to better understand the synthesis process and particle properties i.e. molecular weight, nanoparticle size and chemical composition of the materials. Additionally, GPC-MALLS revealed the copolymer chain conformation. These characterizations ultimately guided the selection of appropriate copolymer nanoparticles to develop a controlled-release drug delivery system. The selected copolymers were dissolved in a pharmaceutically acceptable solvent, tetrahydrofuran (THF) together with a drug, rifampin. Solvent casting of this dispersion resulted in the evaporation of the solvent and assembly of numerous microscale copolymer capsules. The rifampin molecules were captured in these microcapsules through a process of phase separation and coacervation. These microcapsules finally sintered to produce a multi-layer film with an unusual honeycomb structure, bridging yet another size scale hierarchy. Characterization of these delivery systems revealed that both series of copolymer materials produced films capable of controlling drug release and that could also potentially prevent biofilm adhesion. / Thesis (Ph.D. (Pharmaceutics))--North-West University, Potchefstroom Campus, 2008.

Current-controlled logic and single electron logic processors have been investigated with respect to thermal-induced bit error. A maximal error rate for both logic processors is regarded as one bit-error/year/chip. A maximal clock frequency and an information channel capacity at a given operation current are derived when a current-controlled logic processor works without error. An available operation range in a current-controlled processor with 100 million elements is discussed. The dependence of an error-free condition on temperature in single electron logic processors is derived. The size of the quantum dot of single electron transistor is predicted when a single electron logic processor with the a billion single electron transistors works without error at room temperature.

Stem cell based therapy has the potential to treat several severe diseases; Parkinson’s disease is one well- known example. Transplantation of stem cell derived cells into animal models is unfortunately often associated with tumour formation or- uncontrolled growth of the transplanted cells. One strategy to suppress this tumour formation might be to induce differentiation of these cells, which in turn would prevent them from dividing.   Neuroblastoma tumors are known to demonstrate the complete transition from an undifferentiated state to a completely harmful, differentiated appearance and derived cells can be used as a model for cell differentiation and tumor suppression.   In this Master Thesis’s the conducting polymers PEDOT and PPy, that upon formation can be doped with biologically active compounds which in- turn can be released in a controlled manner through electrical stimulation, were formed together with various drugs (e.g. Methotrexate and Mycophenolic Acid), here shown to have effect on Neuroblastoma cells. Neuroblastoma- derived cell line SH- SY5Y was used as a model system for neuronal differentiation and tumour inhibition. Release profiles of neuroblastoma active drugs following electrical stimulation were evaluated and the effects from electrochemical processes on simultaneously growing SH- SY5Y cells were investigated.   The methods to deposit and release the drugs were based on electropolymerization and electrochemically controlled release, respectively. Controlled release of various drugs and compounds was monitored using Vis- and UV- spectroscopy and on some occasions using HPLC.   The electrochemically controlled release of a biologically inactive compound that can be used as a negative control for electrochemical release in future experiments was shown and that resulting electrochemical processes have negative effects on neuroblastoma cell growth.

Hydrophobic drug paclitaxel nanoparticles (PAX NPs) and pH sensitive hydrogels were prepared in this study to build a colon targeting nanoparticle based drug delivery system for oral administration. Negative charged PAX NPs at the size of 110 +/- 10 nm were fabricated, characterized and then encapsulated in synthetic / biomacromolecule shell chitosan, dextran-sulfate using a layer by layer (LbL) self-assembly technique. Surface modifications were performed by covalently conjugating with poly (ethylene glycol) (H2N-PEG-carboxymethyl, Mw 3400) and fluorescence labeled wheat germ agglutinin (F-WGA), so as to build a biocompatible and targeted drug delivery system. Extended release of drug paclitaxel can be realized by adding more polyelectrolyte layers in the shell. High cell viability with PEG conjugated and high binding capacities of WGA modified nanoparticles with Caco-2 cells were observed. Preliminary study on stability of the nanoparticles in suspension at different pH was also performed. Two dextran based pH sensitive and enzyme degradable hydrogels: dextran maleic acid (Dex-MA), and glycidyl methacrylated dextran (Dex-GMA) were synthesized for oral delivery of nanoparticles. Hydrogels of both kinds were stable in simulated gastric fluid, but were prone to swelling and degradation in the presence or absence of enzyme dextranase in simulated intestinal fluid. The release profiles of nanoparticles could be tuned from 5 hr to 24 hr periods of time with more than 85% of the nanoparticle released in the simulated intestinal fluid. The release of PAX NPs was completed with longer time periods (45 hr-120 hr). Two possible release mechanisms were discussed for Dex-MA and Dex-GMA-co-AA hydrogels respectively: degradation controlled, and diffusion controlled. These biodegradable hydrogels, which can release nanoparticles depending on pH changes, together with the biocompatible and targeted nanoparticles, may be suitable as a potential colon targeting system for oral delivery of drug nanoparticles.

Fibroin is a biopolymer obtained from the cocoons of the Bombyx mori silkworm that offers many unique advantages. In this thesis work, fibroin was processed into a regenerated film and examined for potential biomaterial applications. The adsorption of bovine serum albumin onto the fibroin film was investigated to examine the biocompatibility of the film, and it was found that BSA adsorption capacity increased with an increase in BSA concentration. At 10 mg/mL of BSA, the BSA sorption reached 0.045 mg/cm2. This level of BSA is indicative of good blood compatibility and biocompatibility of the fibroin. The gas permeabilities of oxygen, nitrogen, and carbon dioxide were tested for potential applications in contact lenses and wound dressings. Over a pressure range of 70 – 350 psig, the permeability of oxygen and nitrogen was 5 Barrer, while that of carbon dioxide ranged from 26 to 37 Barrer. The oxygen transmissibility of the fibroin films prepared in this study was on the low end required for use in daily wear contact lenses, but sufficient to aid the healing process for use in wound dressings. The permeability and diffusivity of four model drugs in the fibroin film was investigated for potential applications in controlled drug release. The permeability at higher source concentrations leveled out to 0.8 – 4.3 x 10-7 cm2/s depending on the drug tested. The diffusion coefficient determined from sorption experiments was approximately 1.8 x 10-9 cm2/s, while the diffusion coefficients from desorption experiments were determined to be 0.8 – 2.7 x 10-9 cm2/s. The magnitude of the drug permeability and diffusivity are consistent with many other controlled release materials, and the fibroin film showed good potential for use in controlled release.

Hydrogels have successfully proved themselves useful for drug delivery applications and several delivery routes have been developed over the years. The particular interest in this work was to design, synthesise and evaluate in situ forming drug eluting hydrogels, which have the potential to ameliorate the healing of cardiovascular diseases. With this aim the anti-inflammatory and immunosuppressant drugs rapamycin (Ra) and dexamethasone (Dex) were made water soluble by conjugation with polyethylene glycol (PEG). Ra was attached pendant from the terminal of PEGs while Dex was incorporated into dendritic structures grown from PEGs. These conjugates were further crosslinked into hydrogels by either conjugate or thiol-ene addition. The gel degradation was tuned to take between 5 and 27 days by using gel building block combinations that induced either 2 or 4 hydrolytically labile bonds per crosslink or by varying the number of crosslinking sites of the building blocks. The use of thiol-ene addition prolonged the degradation time nearly seven folded compared to conjugate addition as a more stable crosslink was formed. Two different formulations for gelling via conjugate addition were used (acrylate-thiol or vinyl sulphone-thiol) to deliver Ra, which was carried by either a 4- or 2-armed PEG. The elution kinetic for the respective gel formulation was of zero order during 15 and 19 days of gel degradation. In addition, Ra was PEGylated via esters, with a distance of either one or two carbons to a nearby thio-ether functionality. The difference in ester conjugation resulted in a slight but significant change in drug-PEG conjugate stability, which was mirrored by the increased time to reach the half amount of total drug elution; from 9.3 to 10.2 days and from 5.1 to 9.7 days for the two gel formulations, respectively. Dexamethasone was incorporated via an ester into dendrons of first and second generation pending from 2- and 4-armed PEGs at loadings of 2, 4 or 6 Dex molecules per carrier molecule. The resulting elution kinetic was of zero order during degradation periods of 5-27 days. Released Dex still possessed biological activity as determined by an in vitro cell assay. The novelties in this thesis are: (A) slow release of rapamycin obtained by covalent incorporation into hydrogels, (B) the use of unique PEG-based dendrimers to incorporate dexamethasone into a hydrogel and (C) zero order sustained release of dexamethasone at physiological pH. / Hydrogeler har framgångsrikt visat sig användbara för att leverera läkemedel och ett flertal metoder har utvecklats de senaste 20 åren. Fokuset i den här avhandlingen ligger på att designa, framställa och utvärdera läkemedelsutsöndrande hydrogeler som spontanhärdar in situ, vilka har potential att förbättra läkningen efter kardiovaskulär sjukdom. Med det syftet gjordes de anti-inflammatoriska och immunsänkande läkemedlen rapamycin (Ra) och dexametason (Dex) vattenlösliga genom att konjugeras med polyetylenglygol (PEG). Ra fästes kovalent längst ut på PEGar medans Dex inkluderades i dendritiska strukturer vilka byggdes från ändpunkten av PEGar. De här konjugaten tvärbands till hydrogeler via antingen konjugerad addition eller radikal polymerisation. Nedbrytningen av gelerna trimmades till att ta mellan 5 och 27 dagar genom att använda kombinationer av gelbyggstenar som bildar antingen 2 eller 4 hydrolyserbara estrar per tvärbindning eller genom att variera antalet tvärbindningspunkter hos byggstenarna. Användandet av radikal polymerisation i sig ledde till att nedbrytningen av geler tog nära sju gånger längre tid jämfört med geler gjorda via konjugerad addition eftersom stabilare tvärbindningar då formas. Två olika kombinationer för härdning via konjugerad addition (akryl-tiol eller vinylsulfon-tiol) användes för att leverera Ra som bars av antingen en 4- eller 2-armad PEG. Utsöndringskinetiken av Ra för de två kombinationerna var av nollte ordningen under de 15 och 19 dagar som gelerna degraderade. Dessutom, Ra PEGylerades via estrar med ett avstånd på antingen ett eller två kol till en närliggande tioeter. Skillnaden i avstånd ledde till en liten men signifikant skillnad i stabiliteten hos Ra-PEG konjugaten, vilket speglades i den förlängda tiden att nå halva mängden av den totala läkemedelsutsöndringen; från 9.3 till 10.2 dagar och från 5.1 till 9.7 dagar för de två respektive gelkombinationerna. Dex kopplades in via en esterbindning till dendroner av första och andra generationen byggda från PEGar med 2 eller 4 armar, vilket resulterade i att 2, 4 eller 6 Dex levererades per bärarmolekyl. Dex eluerade med nollte ordningens kinetik under degraderingsperioder på mellan 5 och 27 dagar. Vidbehålllen biologisk aktivitet av eluerad Dex bekräftades genom cellexperiment in vitro. Nyheterna i den här avhandlingen består av: (A) kontrollerad utsöndring av rapamycin uppnådd genom kovalent inbindning till hydrogeler, (B) användandet av unika PEGbaserade dendrimerer för kovalent inbindning av dexametason till hydrogeler och (C) nollte ordningens utsöndring av dexametason vid fysiologiskt pH. / <p>QC 20130204</p>

As individuals or families hold a substantial share of a firm at the cost of less diversified portfolio, they specialize their portfolio and have better inside information. Does the market marker react to this fact and maintain higher level of asymmetric information cost for such family-controlled firms? We analyze the bid-ask spread and the probability of informed trading (PIN) of Canadian-based publicly traded firms cross-listed with NYSE/AMEX to test this notion. We find that although the market maker maintains higher average spread, he does not form higher PIN for family-controlled firms when the entire day is considered as an event period. <p>The assumption of constant arrival rates of informed and uninformed traders during the day in Easley et al (1996b) is rejected in the two periods per day analysis. In addition, the notion of information event occurrence prior to the day in Easley et al (1996b) is consistently rejected as higher (non-statistically) probability of information events is found in the afternoon (second session) in the two (three) periods per day analyses, respectively. Based on these findings, we have serious doubts about any existing findings (including ours) of PIN based on one period per day. As such, we consider the possibility of several periods per day.<p>Though it remains an empirical question to choose how many periods should be considered, we find our results using two and three periods per day to be very interesting. We consistently reject the hypothesis that the PIN is higher for family-controlled firms. Since the market maker does not need to maintain high spread for firms with very high number of uninformed traders and very low number of informed traders, we do not perceive our findings to be either surprising or contradictory to the present literature. By developing a different formulation of PIN, we also show that this is empirically less than that developed by Easley et al (1996b).