Spelling suggestions: "subject:"firewood"" "subject:"harewood""
1 |
Evaluating the effects of initial stocking, physiological age and species on wood stiffnessWatson, Liam January 2013 (has links)
The influence of initial stocking and physiologically aged cuttings (taken from 1-year- old and 5-year-old parents) on corewood modulus of elasticity (MOE) in 6-year-old Pinus radiata D. Don was studied in a Nelder-design experiment in Rolleston, Canterbury. In the same experiment, the influence of initial stocking on MOE in 5-year- old Eucalyptus nitens was also investigated. The study incorporated 19 different stocking levels ranging from 207 to 40,446 stems/ha. Green dynamic modulus of elasticity was assessed in standing trees using the TreeTap stress-wave method over the lower part of the stem (0.3 – 1.9m) for 151 P. radiata trees and 115 E. nitens trees.
The interaction between species and stocking significantly influenced MOE (P<0.001). MOE of P. radiata increased by 55% (or 3.9 GPa) between 271 and 40,466 stems/ha, and by 41% (or 2.2 GPa) between 271 and 4370 stems/ha. MOE of E. nitens was also influenced by stocking but the slope was significantly lower indicating that the effect of stocking was less pronounced than for P. radiata. Over the usual range of stockings for E. nitens there was an insignificant relationship between stocking and stiffness (P=0.335). Trees were also assessed for DBH, height, and stem slenderness (height/ DBH). None of these latter variables had a significant influence on MOE after the effects of stocking and species were accounted for. No effects of physiological age of cuttings were detected in this study.
The findings of this study highlight the importance of stocking as a tool that forest managers can utilize to regulate corewood stiffness in P. radiata trees. These results also suggest that for E. nitens, where wood stiffness is a priority, forest managers could reduce establishment costs by planting at much lower initial stockings. This study also highlights the superior stiffness of E. nitens in direct comparison with P. radiata, with many trees in the experiment already exceeding stiffness thresholds for structural timber in New Zealand.
|
2 |
Properties and Distortion of Douglas-fir with Comparison to Radiata PineWang, Eric Yunxin January 2009 (has links)
The objectives of this study were to investigate stability related basic wood properties and to determine stability performance of New Zealand grown Douglas-fir and those of radiata pine wood. In this study, nine 60-year old Douglas-fir trees and thirteen 26-year old radiata pine trees were selected from forests in Canterbury region. From these trees, 36 discs of 200 mm thick (13 for Douglas-fir and 23 for radiata pine) and 388 boards with dimensions of 100mm x 50mm x 4.8m (210 fro Douglas-fir and 178 fr radiata pine) were prepared.
From the prepared discs, 515 specimens (204 for Douglas-fi and 211 for radiata pine) were prepared for green moisture content (MC) and basic density measurements, The same total number of 515 specimens (205 for Douglas-fir and 210 for radiata pine) were also prepared for shrinkage measurements. From the green MC specimens, green weight, volume and oven-dry weight were measured while for the shrinkage specimens, dimensions and weights were measured at equilibrium for nine humidity conditions. These data were used to analyse basic wood properties and moisture uptake characteristics for both Douglas-fir and radiata pine. Variation of shrinkage within a tree and between trees was also studied for both species. After this, selected specimens (36 for Doulas-fir and 36 for radiata pine) were further tested in water immersion for water repellence examination.
The 388 full size boards (100mmx50mmx4.8m) were used for studies on distortion and acoustic properties at a sawmill (Southland Timber Ltd.). Dimensions, weights and acoustic velocity were measured from each board before and after drying. These data were used to analyse distortion and strength characteristics for both Douglas-fir and radiata pine. Comparison of the relative stability of full sized Douglas-fir and radiata pine structural timber was investigated in this study.
The results from small sample study confirmed that Douglas-fir is much stronger, has lower longitudinal shrinkage and lower gradient in corewood which can be used to explain the better dimensional stability of Douglas-fir than radiate pine although there is significant variability in the shrinkage for both Douglas-fir and radiate pine. In water immersion tests, Douglas-fir has better water repellency property than radiata pine over 2000 hours period during water immersion.
Under the same commercial practice in sawing and kiln drying, it is clearly shown that Douglas-fir timbers were straighter with lower levels of distortion than radiata pine at similar final moisture content. It is also interesting to note that the final moisture content in a range of 13-18% for Douglas-fir did not have significant impact on timber distortion but a negative trend was observed for radiata pine with MC in a range of 9 -14%. Tree heights showed clear influence on twist for radiata pine timbers, but it was not clearly observed from Douglas-fir timbers. Corewood proportion is found to have negative impact on the timber distortion for both Douglas-fir and radiata pine. Douglas-fir timbers showed much higher average acoustic MOE value than radiata pine timbers at similar final moisture content.
Because of the various proportion of corewood, the shrinkage varied greatly along the stem height and along the disc radius direction for the two species. This variation caused the difference of distortion between corewood, outerwood and transition wood, but the difference between butt log, middle log and top log is inconsistent. Therefore, it is recommended that the corewood proportion to be a criterion for the timber pre-sorting.
Variation of stability performance between trees was also found to be significant for the two species, and methods need to be developed for log sorting as well to reduce the timber distortion degradation. Non-destructive testing method such as acoustic tool may be offered to be a new approach for sorting logs, but it is also necessary to be aware of the significant difference between species.
The outcome from this project includes better understanding of Douglas-fir for structural applications. The conclusion can be drawn that Douglas-fir has superior quality for its strength, durability and moisture resistance. Douglas-fir is also claimed to have uniform properties and thus to be more stable compared to radiata pine. Douglas-fir timbers showed much higher acoustic MOE value than radiate pine timbers as similar final moisture content.
|
Page generated in 0.0222 seconds