Spelling suggestions: "subject:"corrugated steel culverts""
1 |
Analysis of a corrugated metal box type culvertOh, Saekyung January 1989 (has links)
No description available.
|
2 |
Dynamic analysis of soil-steel composite bridges for high speed railway traffic : Case study of a bridge in Märsta, using field measurements and FE-analysisMellat, Peyman January 2012 (has links)
Soil-steel composite bridge refers to structures where a buried flexible corrugated steel pipe works in composite action with the surrounding soil. These structures are being increasingly used in road and railway projects as an alternative to standard type bridges, e.g. short- and medium span concrete beam- and portal frame bridges. On account of their economic advantage and short and easy construction operation, soil-steel composite bridges are getting more popular as railway crossings located far from the cities at the heart of the nature. In this research, the dynamic behaviour of soil-steel composite bridges under high-speed train passages is studied. The studied case is a short span soil-steel composite railway bridge located in Märsta close to Stockholm. The behaviour of the bridge is first observed through field measurements in terms of deflections, stresses, and accelerations at several locations on the bridge. The measured responses are then analysed in order to predict the properties of the soil and steel material working in composite action. Subsequently, 2D and 3D finite element models are developed in order to simulate the behaviour of the bridge. The models are calibrated using the field measurements through several parametric studies. The 3D-model also enables estimation of the load distribution, which is found to increase at higher train speeds. An effective width to be used in 2D analyses is proposed. Finally, the response of the bridge is studied under high-speed train models according to Eurocode.
|
3 |
Dynamic analysis of soil-steel composite railway bridges : FE-modeling in PlaxisAagah, Orod, Aryannejad, Siavash January 2014 (has links)
A soil-steel composite bridge is a structure comprised of corrugated steel plates, which are joined with bolted connections, enclosed in friction soil material on both sides and on the top. The surrounding friction soil material, or backfill, is applied in sequential steps, each step involving compaction of the soil, which is a necessity for the construction to accumulate the required bearing capacity. Soil-steel composite bridges are an attractive option as compared with other more customary bridge types, owing to the lower construction time and building cost involved. This is particularly true in cases where gaps in the form of minor watercourses, roads or railways must be bridged. The objective of this master thesis is the modelling of an existing soil-steel composite railway bridge in Märsta, Sweden with the finite element software Plaxis. A 3D model is created and calibrated for crown deflection against measurement data collected by the Division of Structural Engineering and Bridges of the Royal Institute of Technology (KTH) in Stockholm, Sweden. Once the 3D model is calibrated for deflection, two 2D models with different properties are created in much the same way. In model 1, the full axle load is used and the soil stiffness varied, and in model 2 the soil stiffness acquired in the 3D model is used and the external load varied. The results are compared to measurement data. In 2D model 1 an efficient width of 1,46 m for the soil stiffness is used in combination with the full axle load, and in 2D model 2 an efficient width of 2,85 m is used for the external load, in combination with the soil stiffness acquired in the 3D model. Aside from this, parametric studies are performed in order to analyse the effect of certain input parameters upon output results, and in order to analyse influence line lengths. Recreating the accelerations and stresses in the existing bridge using finite element models is complicated, and the results reflect this. Below are shown the discrepancies between model results and measurement data for the pipe crown. The scatter in the measurement data has not been taken into consideration for this; these specific numbers are valid only for one particular train passage. For crown deflection, the 3D model shows a discrepancy of 4%, 2D model 1 5% and 2D model 2 8% compared with measurement data. For crown acceleration, in the same order, the discrepancy with measurements is 1%, 71% and 21% for maximum acceleration, and 46%, 35% and 28% for minimum acceleration. For maximum crown tensile stress, the discrepancy is 95%, 263% and 13%. For maximum crown compressive stress, the discrepancy is 70%, 16% and 46%.
|
Page generated in 0.0891 seconds