Welding, as one of the most effective joining methods for metals, has been extensively applied in engineering usage for a long time. When cracks occur in the vicinity of weldments, weld repairs are frequently considered for crack repair to extend service life. In order to evaluate to what extent the weld repair has improved the fatigue life of a cracked welded structure, it is necessary to be able to determine the residual life of the cracked welded joint, as well as the life of the weld repaired joint. Both these assessments require that the fatigue crack growth data be available. The determination of crack propagation rates of welded and weld repaired structures is thus of paramount importance to implement a damage tolerant approach to structural life extension. However, since most studies on welded joints so far have concentrated on fatigue life evaluation, at the present time only limited information is available on crack propagation rates in welded joints, and virtually none on fatigue behaviour and crack propagation in weld repaired joints. This thesis has focused on examination of fatigue and crack propagation behaviour in as welded and weld repaired aluminium alloy 5083, a weldable marine grade alloy extensively used in construction of high speed ferries and aerospace structures. Crack growth rates were measured during constant amplitude fatigue testing on unwelded, as-welded and weld repaired specimens of 5083-H321 aluminium alloy. A 3-D finite element analysis was conducted to determine the stress intensity factors for different lengths of crack taking into account the three-dimensional nature of the weld profile. The effects of crack closure due to weld residual stresses were evaluated by taking measurements of the crack opening displacements and utilised to determine the effective stress intensity factors for each condition. Metallurgical examinations and fractography of the fracture surface were conducted using an optical microscope and SEM. It was found that crack growth rates in welded plates are of the same order of magnitude as those of parent material when effective stress intensity factors were applied. However weld repaired plates exhibit higher crack growth rates compared to those of unwelded and once-only welded plates.