While several lines of evidence strongly hint at the biological importance of impact-induced hydrothermal systems during the impact cataclysm at ~3.9 Ga, these systems are not well understood. There is unambiguous evidence of hydrothermal activity at many terrestrial craters, but the available samples represent a very limited number of crater diameters and locations within the crater. Therefore, computer models are crucial for learning how impact-induced hydrothermal systems work, how long they last, and whether they provide suitable environments for thermophilic microorganisms. This dissertation presents detailed simulations of hydrothermal activity at the terrestrial craters Chicxulub and Sudbury, as well as at range of crater sizes on early Mars. A well-established computer code HYDROTHERM was used. The models for terrestrial craters were constrained by seismic, magnetic, and gravity surveys, as well as petrological, mineralogical, and chemical analyses of samples (by others).Sudbury crater is ~180 km in diameter, and 1.85 Ga. Simulation results indicate that a hydrothermal system at Sudbury crater remained active for several hundred thousand to several million years, depending on assumed permeability, and produced habitable volumes of up to ~20,000 km^3.Chicxulub crater is also ~180-km in diameter, but only 65 Ma. The lifetime of the hydrothermal system ranges from 1.5 Ma to 2.3 Ma depending on assumed permeability. The temperatures and fluxes observed in the model are consistent with alteration patterns observed by others in borehole samples.Another set of simulations modeled post-impact cooling of hypothetical craters with diameters of 30, 100, and 180 km in an early Martian environment. System lifetimes, averaged for all permeability cases examined, were 67,000 years for the 30-km crater, 290,000 years for the 100-km crater, and 380,000 for the 180-km crater. Also, an ap-proximation of the thermal evolution of a Hellas-sized basin (~2000 km) suggests poten-tial for hydrothermal activity for ~10 Myr after the impact. The habitable volume reached a maximum of ~6,000 km^3 in the 180-km crater model.Possible morphological and mineralogical signs of hydrothermal activity in Martian craters were observed, both in this work and by others. These observations, while by no means definitive, are generally consistent with model predictions.

This investigation focuses on two well-preserved impact structures developed in sedimentary target rocks: the ~23.5 Ma old Haughton structure, Canada, and the ~14.5 Ma old Ries structure, Germany. The aim of this study was to investigate the effects of hypervelocity impact into sedimentary targets. The study reveals that a series of different impactites are present at Haughton, the bulk of which comprise a groundmass of impact-generated melts (calcite + silicate glass ± anhydrite). Thus, carbonates, evaporites, sandstones, and shales underwent shock melting during the Haughton impact event. The shock melting of impure carbonates resulted in the generation of Mg–Ca–Si-rich melts that crystallized calcite during rapid cooling. The residual melt quenched to Mg–Si-rich glass. These impactites should, therefore, be classified as clast-rich impact melt rocks or impact melt breccias, and not clastic matrix breccias as previously held. Ries surficial suevites are reinterpreted as clast-rich impact melt rocks or impact melt breccias. Four main types of impact melt glass are present, in contrast to previous studies that recognized only one type. These results are at odds with the current, generally accepted, definition of suevite. Given that the Ries is the original type occurrence of ‘suevite’, some redefinition of the term suevite may be in order. Furthermore, it is clear that sedimentary rocks, as well as crystalline rocks, were shock melted during the Ries impact event. The results of this study are, therefore, incompatible with previous models in which the zone of melting is restricted to the crystalline basement. It is apparent that impact melting in sedimentary targets is much more common than previously thought. Furthermore, there is no unequivocal evidence for the decomposition of carbonates or evaporites at any terrestrial impact site. Many previous assumptions about the response of sedimentary rocks during hypervelocity impact events are, therefore, incorrect. The products of impact into sedimentary targets may appear very different from those developed in crystalline targets. However, microscopic imaging and analysis suggests that these seemingly different lithologies may be genetically equivalent. Thus, the apparent ‘anomaly’ between the amount of impact melt rocks formed in sedimentary and crystalline targets may be due to a misinterpretation of the rock record.

Thesis (M.S.)--University of Texas at El Paso, 2007. / Title from title screen. Vita. CD-ROM. Includes bibliographical references. Also available online.

abstract: Impact cratering and volcanism are two fundamental processes that alter the surfaces of the terrestrial planets. Though well studied through laboratory experiments and terrestrial analogs, many questions remain regarding how these processes operate across the Solar System. Little is known about the formation of large impact basins (>300 km in diameter) and the degree to which they modify planetary surfaces. On the Moon, large impact basins dominate the terrain and are relatively well preserved. Because the lunar geologic timescale is largely derived from basin stratigraphic relations, it is crucial that we are able to identify and characterize materials emplaced as a result of the formation of the basins, such as light plains. Using high-resolution images under consistent illumination conditions and topography from the Lunar Reconnaissance Orbiter Camera (LROC), a new global map of light plains is presented at an unprecedented scale, revealing critical details of lunar stratigraphy and providing insight into the erosive power of large impacts. This work demonstrates that large basins significantly alter the lunar surface out to at least 4 radii from the rim, two times farther than previously thought. Further, the effect of pre-existing topography on the degradation of impact craters is unclear, despite their use in the age dating of surfaces. Crater measurements made over large regions of consistent coverage using LROC images and slopes derived from LROC topography show that pre-existing topography affects crater abundances and absolute model ages for craters up to at least 4 km in diameter. On Mars, small volcanic edifices can provide valuable insight into the evolution of the crust and interior, but a lack of superposed craters and heavy mantling by dust make them difficult to age date. On Earth, morphometry can be used to determine the ages of cinder cone volcanoes in the absence of dated samples. Comparisons of high-resolution topography from the Context Imager (CTX) and a two-dimensional nonlinear diffusion model show that the forms observed on Mars could have been created through Earth-like processes, and with future work, it may be possible to derive an age estimate for these features in the absence of superposed craters or samples. / Dissertation/Thesis / Doctoral Dissertation Geological Sciences 2018

No description available.

In this study, impact craters in water ice are modeled using the hydrodynamic code CTH. In order to capture impact craters in ice an equation of state and a material model are created and validated. The validation of the material model required simulating the Split Pressure Hopkinson Bar (SPHB) experimental apparatus. The SPHB simulation was first compared to experiments completed on Al 6061-T6, then the ice material model was validated. After validation, the cratering simulations modeled known experiments found in the literature. The cratering simulations captured the bulk physical aspects of the experimental craters, and the differences are described. Analysis of the crater simulations showed the damaged volume produced by the projectile was proportional to the projectile’s momentum. Also, the identification of four different stages in the crater development of ice (contact and compression, initial damage progression, crater shaping, and ejected damaged material) are described.

The North Polar Layered Deposits (NPLD) of Mars contain a complex stratigraphy that has been suggested to retain a record of past eccentricity- and obliquity-forced climate changes. The surface accumulation rate in the current climate can be constrained by the crater retention age. We scale NPLD crater diameters to account for icy target strength and compare surface age using a new production function for recent small impacts on Mars to the previously used model of Hartmann (2005). Our results indicate that ice is accumulating in these craters several times faster than previously thought, with a 100m diameter crater being completely infilled within centuries. Craters appear to have a diameter-dependent lifetime, but the data also permit a complete resurfacing of the NPLD at similar to 1.5 ka.

The ultimate goal of this dissertation was to better understand what the Apollo sample collection tells us about the impact history of the Moon. My main research tool is a computer code called Cratered Terrain Evolution Model (CTEM). CTEM is a Monte Carlo landscape evolution code developed to model a planetary surface subjected to impacts. While the main effect of impact cratering that CTEM simulates is elevation changes of the landscape through the excavation process of craters and the deposition of ejecta, I worked to extend the capabilities of the code to study problems in material transport. As impact cratering is a dominant process on the surface of Moon, the stratigraphy of lunar geology is thought to be composed of stacks of impact-generated ejecta layers. Each individual impact generates ejecta that is sourced from varying depths of the subsurface. This ejecta contains a rich abundance of material containing information, including composition and datable impact products, such as impact glasses. The extensions to the CTEM code that I developed allows me to track all ejecta generated during a simulation and model the complex history of the lunar regolith.

abstract: Impact craters are ubiquitous throughout the Solar System, formed by one of the principal processes responsible for surface modification of terrestrial planets and solid bodies (i.e., asteroids, icy moons). The impact cratering process is well studied, particularly on the Moon and Mercury, where the results remain uncomplicated by atmospheric effects, plate tectonics, or interactions with water and ices. Crater measurements, used to determine relative and absolute ages for geologic units by relating the cumulative crater frequency per unit area to radiometrically-determined ages from returned samples, are sensitive to the solar incidence angle of images used for counts. Earlier work is quantitatively improved by investigating this important effect and showing that absolute model ages are most accurately determined using images with incidence angles between 65&deg; and 80&deg;, and equilibrium crater diameter estimates are most accurate at ~80&deg; incidence angle. A statistical method is developed using crater size-frequencies to distinguish lunar mare age units in the absence of spectral differences. Applied to the Moon, the resulting areal crater densities confidently identify expansive units with >300&ndash;500 my age differences, distinguish non-obvious secondaries, and determine that an area >1&times;104 km2 provides statistically robust crater measurements. This areal crater density method is also applied to the spectrally-homogeneous volcanic northern smooth plains (NSP) on Mercury. Although crater counts and observations of embayed craters indicate that the NSP experienced at least two resurfacing episodes, no observable age units are observed using areal crater density measurements, so smooth plains emplacement occurred over a relatively short timescale (<500 my). For the first time, the distribution of impact melt on Mercury and the Moon are compared at high resolution. Mercurian craters with diameters &ge;30 km have a greater areal extent of interior melt deposits than similarly sized lunar craters, a result consistent with melt-generation model predictions. The effects of shaking on compositional sorting within a granular regolith are experimentally tested, demonstrating the possibility of mechanical segregation of particles in the lunar regolith. These results provide at least one explanation toward understanding the inconsistencies between lunar remote sensing datasets and are important for future spacecraft sample return missions. / Dissertation/Thesis / Ph.D. Geological Sciences 2013

No description available.