The master thesis deals with the possibilities of using waste aggregate from main rock production to hydraulically bound mixtures, witch are used in base and sub base pavement. The theoretical part describes conditions and properties of bound mixtures, aggregates and cement. The practical part describes the process of design, mixture preparing and laboratory test carried out on them. The bound mixtures are testing in compressive strength, frost and water resistace and resilient modulus.

This diploma thesis deals with the design of an inclined three-sided vibrating screen, which is designed for sorting bulk aggregates. The aim of the diploma thesis is primarily to make a construction design with a specific comparison of various design solutions, considering the calculated operating parameters. In the construction design, is used not only the experience of the manufacturer of this type of machine, but also recommendations based on the manu-facturers of screens component. The design also includes a comparison of two types of flex-ible mounting, which is one of the basic structural units of the entire vibrating screen. The thesis is conceived from the basics, with emphasis on the simplicity and functionality of the device.

The works deals with the possibilities of using non-standard fraction of fine crushed aggregate in route base layers. Goal of my thesis is research of using material from specific location. Theoretical part summarizes basic knowledge regarding bound mixtures and their normative requirements. Practical part of my thesis describes my various mixture design and following testing and determination of design properties by official and experimental tests. The conclusion summarizes the researched outputs and findings, which confirm the future possibilities of using this material in base layers.

The work deals with the possibilities of using fine crushed and quarried aggregate to base layers of roads. The introduction of the theoretical part explains the origin of this type of aggregate. There are also described the tests, which were used to verify the attributes and features of these mixtures and their use in cemented base layers of roads. In a brief way, the work also deals with foreign research and the possibilities that arise from it. In the practical part is then described the process of mixture preparing and laboratory tests carried out on them, the production of test specimens, load tests of these specimens and interpretation of the results. The conclusion summarizes the findings. Here are also discussed ways to apply them in practice.