Thesis advisor: Yvette D. Kuiper / Crystallographic Preferred Orientations (CPO) are common in deformed rocks, and usually result from crystal plastic deformation by dislocation creep. Whether deformation mechanisms that occur at lower differential stress and lower temperature than dislocation creep, such as Dissolution-Precipitation Creep (DPC), may result in the development of a CPO is less certain. DPC, a process also known as pressure-solution creep or dissolution creep, has caused substantial removal and reprecipitation of quartz within the Purgatory Conglomerate of Rhode Island. The conglomerate is exposed within the southeastern region of the Pennsylvanian Narragansett basin and experienced folding during the Alleghanian orogeny. Strain within the southeastern portion of the Narragansett basin increases from west to east and is associated with a metamorphic gradient from very low grade greenschist facies in the west to the lower biotite zone in the east. Within the Pugatory Conglomerate DPC has led to the dissolution of quartz along cobble surfaces perpendicular to the shortening direction, and to be precipitated as overgrowths at the ends of the cobbles (strain shadows), parallel to the maximum extension direction. This offers a unique opportunity to study the effects of dissolution and precipitation separately, because the quartz grains within the cobbles experienced dissolution only, while precipitation occurred in the strain shadows. Cathodoluminescence (CL) analysis was conducted on regions within the strain shadow in order to determine what amount of the quartz was formed authigenically. The results suggest that quartz-rich areas of the strain shadow were comprised primarily of authigenic quartz and formed channels or wedges. Electron Backscatter Diffraction (EBSD) analysis was used to test whether quartz dissolution processes within the cobbles and/or quartz precipitation within the strain shadows resulted in CPO development. Quartz grain c-axis orientations of various domains within the cobbles and strain shadows indicate that CPO patterns are absent in both domains of dissolution and of precipitation irrespective of the degree of strain or metamorphic grade. The existence of discrete mica selvages along the cobble margins suggests that quartz dissolution only occurred along the cobble surface and did not affect the grains, or result in a CPO, within the cobble's interior. Quartz precipitation within the strain shadows did not result in a CPO, probably because the strain shadows are truly localized regions of low strain with little to no differential stress, allowing quartz grain growth in random orientations. / Thesis (MS) — Boston College, 2010. / Submitted to: Boston College. Graduate School of Arts and Sciences. / Discipline: Geology and Geophysics.

Since 2011, the Institute of Petrology and Structural Geology, Charles University in Prague, worked with CIP - Computer Integrated Polarization microscopy as fast, inexpensive measurement of c-axis orientation of uniaxial minerals, mostly quartz in high definition. CIP method is developed from the early nineties in Switzerland (Heilbronner & Pauli 1993) and later in many other workplaces. The aim of this work was testing and calibration of optical and camera equipment to verify the accuracy and reliability of data obtained. Served as an independent measurement of EBSD (Electron Backscatter Diffraction) data obtained from the same part of the studied thinsections. The data obtained were analyzed by quantitative analysis of microstructures (PolyLX - MATLABTM toolbox; Lexa 2003). The samples used for testing the methodology mentioned were taken on the profile of Hvězdná and Zdobnice near Rokytnice in the Eagle Mountains by contact orlica-snieznik complex and its mantle. Field studies showed the existence of west dipping shear zone along the said contact and deformed orthogneiss show a macroscopic superposition of several deformation events. The resulting frequency histograms similarities and differences of angles c-axes and angles misorientace grains have a high consensus in the azimuthal criterion, axes...

Thesis advisor: Seth C. Kruckenberg / The West Antarctic rift system is one of the most expansive regions of extended continental crust on Earth, but relatively little is known about the structure of the mantle lithosphere in this region. This research aims to examine a suite of ultramafic mantle xenoliths from several volcanic centers located throughout Marie Byrd Land, West Antarctica. Through the use of several complementary analytical methods, the deformational and compositional heterogeneity of the lithospheric mantle in this region is characterized. The Marie Byrd Land xenoliths have equilibration temperatures between 779 and 1198°C, which is a range that corresponds to extraction depths between 39 and 72 km. These samples preserve significant mineralogical and microstructural heterogeneities that document both lateral and vertical heterogeneities within the Marie Byrd Land mantle lithosphere. The modal mineralogy of spinel peridotites varies between 40 – 99% olivine, 0 – 42% diopside, 0 – 45% enstatite and 0 – 5% chromite. Minimum olivine grain sizes range from 60 to 110 µm and maximum olivine grain sizes range from 2.5 to 10.0 mm. The geometric mean grain size of olivine in these samples ranges from 100 µm to 2 mm and has an average of 694 µm. The geometric mean grain size of diopside ranges from 90 to 865 µm and has an average of 325 µm, whereas that of enstatite ranges from 120 µm to 1.2 mm and has an average of 625 µm. Comparatively, the pyroxenites contain 0 – 29% olivine, 29 – 95% diopside, 1 – 36% enstatite and 1 – 11% chromite. Deformation mechanism maps suggest that the olivine within the MBL peridotite xenoliths primarily accommodate strain through the operation of dislocation-accommodated grain-boundary sliding at strain rates between 10-19/s and 10-11/s. This is consistent with microstructural observations of the suite made using optical microscopy (e.g., deformation bands and subgrains in olivine; aligned grain boundaries between contrasting phases). Application of the olivine grain size piezometer indicates that the suite preserves differential stresses ranging from 0.5 MPa to 50 MPa, with mean differential stresses ranging from 4 to 30 MPa. Values of mean differential stress only vary slightly throughout the field area, but generally decrease in magnitude towards the east with maximum values migrating upwards in the lithospheric mantle along this transect. The samples from some volcanic centers are highly homogenous with respect to their microstructural characteristics (e.g., Mount Avers – Bird Bluff), whereas others display heterogeneities on the sub-five-kilometer-scale (e.g., Demas Bluff). Comparatively, mineralogical heterogeneities are more consistent throughout the sample suite with variations generally being observed between the sub-five-kilometer-scale and the sub-ten-kilometer-scale. Most samples within the MBL peridotite suite display axial-[010] or A-type olivine textures. Although less dominant, axial-[100], B-type and random olivine textures are also documented within the suite. Axial-[010] textures have J-indices and M-indices ranging from 1.7 – 4.1 and 0.08 – 0.21, respectively. The average value of the J-index for axial-[010] textures is 2.9, whereas the average M-index of these samples is equal to 0.15. Overall, A-type textures tend to be stronger with J- and M-indices ranging from 1.4 – 9.0 and 0.07 – 0.37, respectively. The olivine crystallographic textures of the MBL xenolith suite are heterogeneous on scales that are smaller than the highest resolution that is attainable using contemporary geophysical methods, which implies that patterns of mantle flow and deformation are far more complex than these studies suggest. / Thesis (MS) — Boston College, 2016. / Submitted to: Boston College. Graduate School of Arts and Sciences. / Discipline: Earth and Environmental Sciences.

In the first article, the seismic properties for a suite of rocks along the West Cycladic Detachment System (Greece) are calculated, using Electron backscatter diffraction (EBSD) measurements and the minerals’ elastic stiffness tensors. Muscovite and glaucophane well defined crystallographic preferred orientation increases the seismic anisotropy. Maximum Pwave velocities have the same orientation as the Miocene extension and maximum S-wave anisotropy is subhorizontal, parallel with mineral alignment, suggesting strong radial anisotropy with a slow subvertical axis of symmetry. In the second article, teleseismic receiver functions are calculated for an array of stations in the Cyclades and decomposed into back-azimuth harmonics to visualise the variations in structure and anisotropy across the array. Synthetic receiver functions are modeled using the first order structural observations of seismic discontinuities and EBSD data. They indicate 5% of anisotropy with slow symmetry axis in the upper crust, and demonstrate the importance of rock textural constraints in seismic velocity profile interpretation.

The rheology and strength of the lower crust play a key role in lithosphere dynamics, influencing the orogenic cycle and how plate tectonics work. Despite their geological importance, the processes that cause weakening of the lower crust and strain localization are still poorly understood. Through microstructural analysis of naturally deformed samples, this PhD aims to investigate how weakening and strain localization occurs in the mafic continental lower crust. Mafic granulites are analysed from two unrelated continental lower crustal shear zones which share comparable mineralogical assemblages and high-grade deformation conditions (T > 700 °C and P > 6 Kbar): the Seiland Igneous Province in northern Norway (case-study 1) and the Finero mafic complex in the Italian Southern Alps (case-study 2). Case-study 1 investigates a metagabbroic dyke embedded in a lower crustal metasedimentary shear zone undergoing partial melting. Shearing of the dyke was accompanied by infiltration of felsic melt from the adjacent partially molten metapelites. Findings of case-study 1 show that weakening of dry and strong mafic rocks can result from melt infiltration from nearby partially molten metasediments. The infiltrated melt triggers melt-rock reactions and nucleation of a fine-grained (< 10 µm average grain size) polyphase matrix. This fine-grained mixture deforms by diffusion creep, causing significant rheological weakening. Case-study 2 investigates a lower crustal shear zone in a compositionally-layered mafic complex made of amphibole-rich and amphibole-poor metagabbros. Findings of case-study 2 show that during prograde metamorphism (T > 800 °C), the presence of amphibole undergoing dehydration melting reactions is key to weakening and strain localization. Dehydration of amphibole generates fine-grained symplectic intergrowths of pyroxene + plagioclase. These reaction products form an interconnected network of fine-grained (< 20 µm average grain size) polyphase material that deforms by diffusion creep, causing strain partitioning and localization in amphibole-rich layers. Those layers without amphibole fail to produce an interconnected network of fine grained material. In this layers, plagioclase deforms by dislocation creep, and pyroxene by microfracturing and neocrystallization. Overall, this PhD research highlights that weakening and strain localization in the mafic lower crust is governed by high-T mineral and chemical reactions that drastically reduce grain size and trigger diffusion creep.