The work deals with design of transformation cells suitable for realization of higher orders frequency filters with possibility of cutoff frequency control. At first, there is a common description of frequency filters and active elements like current and voltage conveyors. Furthermore assumptions of cutoff frequency control are defined which result in a convenient characteristical equation. Phylosophy of synthetic elements DP , EP , DS , ES including a possibility of change of cutoff frequency is next in line. By exploitation of synthetic elements theory new circuit’s schemes of transformation cells are searched. The work continues with the choice of appropriate transformation cells for resulting circuit’s solutions of frequency filters with possibility of cutoff frequency control by using transfer coefficients of active elements or with help of passive elements. The work concludes with verification of its proper function based on a simulation executed in OrCAD and with practical implementation of choosen circuit’s solution.

This thesis treats of problems of nonlinear circuits. In introduction the basic possibilities of solving nonlinear circuits are described. Then the basic information on modern current active elements is mentioned, for example current follower, current operational amplifier and current conveyor. In the next part of this thesis the problem of real characteristics of semiconductor diodes is described, major attention is focused on reverse recovery time. Three various types of circuits with nonlinear elements are described in this masters thesis. The first type of circuits are diode precision rectifiers, the full-wave rectifiers containing voltage operational amplifier are most explored, current follower and other active components are described in previous chapters. Simulations in PSpice were executed for each of these circuits. Then the attention was devoted to increase of maximum working frequence. The minimum necessary amplitude of input signal was also analyzed. In the following part two designs of diode function converters are processed, function converter with voltage operational amplifier and function converter with current follower. For each of the diode function converters designed, simulations were executed to find their real properties. The variety of diode voltage limiters and diode current limiters are the third type of nonlinear circuits described, from which the upper limiter and double limiter are investigated in more detail. Simulations were executed for all limiters and their functionality and problems connected with their usage for limitation of high frequency signals were analyzed. In the last part of the thesis there is described the practical realization of precise rectifier, which showed the best ability to process high frequency signals of all investigated circuits. This circuit was realized so that it is able to operate in current and mixed mode. Measured values of real circuits were compared with values gained from the simulations.

This thesis deals with a proposal of versatile autonomous circuit equivalents of floating and grounded passive elements by means of modern active tectonic blocks, such as current and voltage conveyors of all three generations. Current conveyors range as essential tectonic blocks in a current mode. Concerning signal processing, it encompasses a mixed tectonic block. In most cases, these elements may be substituted for presently insufficient operating amplifiers. The voltage conveyor was defined on the basis of duality of current and voltage modes. This element could be selected as a suitable active component for circuits operating in a voltage mode. Implementing the connection, a general autonomous circuit is taken into account. By selecting given admittances, a FDNR (floating frequency dependent negative resistance) element, floating capacitance, floating inductance and ground to floating admittance converter may be implemented. The practical part describes connections which fulfill given requirements. The suggested elements are simulated in comparison with ideal elements and subsequently, they are applied to a frequency filter. The second order filter with a proposed induction coil was practically assembled and experimentally measured in a laboratory. The measured results were compared to simulations received by the use of ideal and real models of current and voltage conveyors.

This thesis deals with non-linear curcuit structures with current active elements. In its introduction this work deals with a description of the current active elements, such as current conveyor, transconductance operational amplifier and current follower. Further the text pays attention to the possiblities of the circuits for modification signals in analogue technology. First are described circuits of diode limiters and transducer. Great attention is paid to the amplifiers with current active elements. Are propřed simulated and practically realized circuits of universal precise full-wave rectifiers using operational amplifier and current conveyor and made comparisons of known and proposed circuits. The paper also discussed other circuit structures using of current active elements, such as multiplier, divider, a triangular signal generator and oscillators.

Thesis describes the design of the blocks of fractional-order filters approximation using a filter of higher order integer. Active filters of third-order are use to create filter of 1+alfa -order, where alfa is between zero to one. One of the filters is practically implemented and measured.

Thesis describes the design of the blocks of fractional-order filters approximation using a filter of higher order integer. Active filters of third-order are use to create filter of 1+alfa -order, where alfa is between zero to one. One of the filters is practically implemented and measured.

This document is focused on already existing single-ended frequency filters with modern active components working in current mode and their modification into fully-differential ended form. After the modification both versions were compared between each other. The first part informs about problems concerning analogue frequency filters. The second part deals with used active components - MO-CF (Multiple Output Current Follower), BOTA (Balanced transconductance amplifier), UCC (universal current conveyor), VDTA (Voltage differencing transconductance amplifier), CDTA (Current differencing transconductance amplifier) and VDCC (voltage differencing current conveyor). Four circuits have been chosen and transformed into their differential form. Two circuits have been chosen and realised into PCB and then practicaly measured in a laboratory. The last part is a summary of simulations and measured results and check of circuits behavior result.

This master´s thesis deals an active elements called digitally controlled current amplifier, multiple-output current follower and its usage in tunable frequency filters. These tunable frequency filters operate in a pure current mode. In the first part of this work are presented the different types of current active elements. Universal current conveyor, multiple-output current follower, digitally controlled current amplifier (UCC, MO-CF, DCCA). In the second part of this work are introduced particular methods of design tunable frequency filters. Special attention is given to using the design method of via autonomous circuits because it is one of the most. In the last part of this thesis are designed and computer-simulated individual multifunction tunable frequency filters with those already active yet elements. These filters were designed via autonomous circuits or modification of existing circuits. The functionality of the proposed filtres have been verified by computer simulation. Snap3 program was used for the symbolic analyse of circuit and OrCad PSpice program was used to simulate the characteristics of multifunction filters.

This master´s thesis is about MO-CF, DCCA and CC frequency filters with current active elements proposal. Current active elements, their features, structure and utilization are shown in introduction. A progress propose of universal filter is described in thesis. With the use of active elements has been established an universal filter with basic parameter changes capability (quality and limit frequency). SNAP software was used in this propose and the characteristics simulation have been done in OrCad-PSpice. For control changes of quality and limit frequency was used active element DCCA. The main circuit board of universal controlled filter was made with the EAGLE software. Created sample was measured for each type of filter, the different quality and limit frequency. These values were compared with simulated values of the filter.

The diploma thesis deals with analysis, validation, measurement of parameters of the commercially available current multiplies (namely the EL2082 and EL4083) and their applications in practice. Control analysis are carried out in OrCAD PSpice program and compared with values from datasheets. Control analysis are focused on AC and DC characteristics of these active blocks. There are discusses the input impedance, the output impedance, the current gain and the possibility of electronic adjusting. The parameters of the elements were verified by measurements. Proposals for circuit applications (selective circuit, oscillator, frequency filter) with EL2082 and EL4083 are presented and analyzed in the program OrCAD. Three oscillator circuit designs are experimentally tested and the results are compared with the theoretical expectations and simulations in OrCAD. The possibility of electronic control for oscillators is examined. Also the sensitivity and the tolerance analysis are carried out. The constructional details of oscillators are presented at the end of this work.