The Wafer Level Chip Scale Package (WLCSP) is gaining popularity for its performance and ability to meet the miniaturization requirements of portable consumer electronics, such as cell phones. For the industry of electronic package, the package life of electronic products is deemed as the essential consideration in the operation period. In practice, electronic products are usually damaged due to a harsh mechanical impact, such as drop and bending. The solder interconnections provide not only the electronic path between electric components and printing circuit board, but also the mechanical support of components on the printing circuit board, so that the reliability of solder interconnection becomes an essential consideration for a package. In the thesis several parameters, including redistribution layer (RDL) material and thickness, passivation material and thickness, under-bump metallization (UBM) structure factors are discussed. A variety of WLCSP structures are investigated for solder joint reliability performance. In addition to the fatigue lives of the test vehicle, locations and modes of fractured solder joints were observed. It was found that wafer level packaging structure under drop clearly related with the characteristic life. The weakest point of solder ball was intermetallic compound (IMC), and wafer level packaging structure was the crack into the second passivation layer and UBM interface of the corner. WLCSP under temperature cycling test was done and observed the fracture only occurred at the solder ball near the package.

Thesis (Ph. D.)--University of Missouri--Columbia, 2001. / Typescript. Vita. Includes bibliographical references (leaves 95-113). Also available on the Internet.

The Arabidopsis thaliana genome encodes twenty putative cyclic nucleotide-gated channel (CNGC) genes. Studies on A. thaliana CNGCs so far have revealed their ability to selectively transport cations that play a role in various stress responses and development, however, the regulation of plant CNGCs is not yet fully understood. Thus, in this study I have attempted to analyze the structure-function relationship of AtCNGCs, mainly by using suppressor mutants of the rare gain-of function mutant, cpr22. The A. thaliana mutant cpr22 resulted from an approximately 3kb deletion that fused the 5’ half and the 3’ half of two CNGC-encoding genes, AtCNGC11 and AtCNGC12, respectively. The expression of this chimeric CNGC, the AtCNGC11/12 gene confers easily detectable characteristics such as stunted morphology with curly leaves and hypersensitive response-like spontaneous lesion formation. Through a suppressor screen, twenty nine new alleles were identified in AtCNGC11/12. Since the cytosolic C-terminal region contains important regulatory domains, such as a cyclic-nucleotide binding domain, eleven cytosolic C-terminal mutants, S17, S35, S81, S83, S84, S100, S135, S136, S137, S140 and S144, were analyzed. A detailed analysis of two mutants, S100 (AtCNGC11/12:G459R) and S137 (AtCNGC11/12:R381H), suggested that G459 and R381 are important for basic channel function rather than channel regulation. Site-directed mutagenesis and fast protein liquid chromatography (FPLC) showed that these two amino acids influence both intra- and inter-subunit interactions that are involved in stabilizing the tertiary structure of the channel. In addition, calmodulin binding domain(s) (CaMBD) and cyclic nucleotide binding domain(s) (CNBD) of some of AtCNGCs were studied using computational modeling and biophysical analyses. The data indicated that AtCNGC12 has two CaMBDs in both N- and C- cytosolic termini, whereas AtCNGC11 has only one CaMBD located in the N-terminal region of the channel. In addition, a thermal shift assay suggested that AtCNGC12 has higher affinity to bind cAMP over cGMP. Taken together, the current study contributes to identify key residues for channel function and provides new insights into CaMBD and CNBD in plant CNGCs.

The Arabidopsis thaliana genome encodes twenty putative cyclic nucleotide-gated channel (CNGC) genes. Studies on A. thaliana CNGCs so far have revealed their ability to selectively transport cations that play a role in various stress responses and development, however, the regulation of plant CNGCs is not yet fully understood. Thus, in this study I have attempted to analyze the structure-function relationship of AtCNGCs, mainly by using suppressor mutants of the rare gain-of function mutant, cpr22. The A. thaliana mutant cpr22 resulted from an approximately 3kb deletion that fused the 5’ half and the 3’ half of two CNGC-encoding genes, AtCNGC11 and AtCNGC12, respectively. The expression of this chimeric CNGC, the AtCNGC11/12 gene confers easily detectable characteristics such as stunted morphology with curly leaves and hypersensitive response-like spontaneous lesion formation. Through a suppressor screen, twenty nine new alleles were identified in AtCNGC11/12. Since the cytosolic C-terminal region contains important regulatory domains, such as a cyclic-nucleotide binding domain, eleven cytosolic C-terminal mutants, S17, S35, S81, S83, S84, S100, S135, S136, S137, S140 and S144, were analyzed. A detailed analysis of two mutants, S100 (AtCNGC11/12:G459R) and S137 (AtCNGC11/12:R381H), suggested that G459 and R381 are important for basic channel function rather than channel regulation. Site-directed mutagenesis and fast protein liquid chromatography (FPLC) showed that these two amino acids influence both intra- and inter-subunit interactions that are involved in stabilizing the tertiary structure of the channel. In addition, calmodulin binding domain(s) (CaMBD) and cyclic nucleotide binding domain(s) (CNBD) of some of AtCNGCs were studied using computational modeling and biophysical analyses. The data indicated that AtCNGC12 has two CaMBDs in both N- and C- cytosolic termini, whereas AtCNGC11 has only one CaMBD located in the N-terminal region of the channel. In addition, a thermal shift assay suggested that AtCNGC12 has higher affinity to bind cAMP over cGMP. Taken together, the current study contributes to identify key residues for channel function and provides new insights into CaMBD and CNBD in plant CNGCs.

This thesis targets cyclic peptide supramolecular structures for biomaterial applications. The introduction gives a brief insight into supramolecular interactions, peptides, and their application in biomaterials. These supramolecular interactions range from the weak forces of electrostatics and van der Waals interactions, to hydrogen bonding and metal-coordination. The application of peptides and supramolecular interactions has become a highly studied area of chemistry, which has quickly gotten attention in the area of biomaterials. The use of peptides in biomaterials seems obvious since in vivo rejection of this material might be limited. Nature can be used as a blue print to direct the path for hydrogen bonding motifs and metal-coordinating interactions and can be applied potentially towards supramolecular biomaterials. Finally, the introduction reviews the use of cyclic peptides and accounts for the synthetic design of the cyclic octapeptide to be used throughout the thesis work. The second chapter of the thesis provides the details by which the synthetic scheme for creating the linear peptides of interest and ultimately the cyclic peptides is described in detail. Many synthetic challenges were met and overcome during this thesis work; the most notable was overcoming purification challenges and poor amino acid coupling reactions that resulted in low yields. This thesis focuses primarily on the di-substituted pyridylalanine cyclic octapeptide, however much of the initial work on the mono-substituted cyclic octapepide was carried out in tandem allowing for comparison of the two peptides necessary for future work.

Diss. (sammanfattning) Stockholm : Karolinska institutet, 2007. / Härtill 4 uppsatser.

Thesis (Ph. D.)--University of Washington, 2007. / Vita. Includes bibliographical references (leaves 102-118).

Thesis (Ph. D.)--University of Washington, 1997. / Vita. Includes bibliographical references (leaves [114]-130).

Thesis (doctoral)--Lund University, 1998. / Added t.p. with thesis statement inserted. Errata slip inserted. Includes bibliographical references.

Thesis (Ph. D.)--University of Lund, 1992. / Published dissertation. Includes bibliographical references.