Hydropower maintains its position as the most important source of renewable electric energy in the world. The efficiency of large hydropower plants is unsurpassed, and after more than hundred years of development, the technology is mature and highly reliable. While new hydro resources are currently being developed in Asia and South America, most European countries go through a phase of intense refurbishment and upgrading of existing plants. Challenges faced by the hydropower industry include a knowledge transfer to new generations and the adaptation of unit designs to meet new operational requirements. As with all branches of engineering, the use of computerized design tools has revolutionized the art of hydropower plant design and the analysis of its performance. In the present work, modern tools like coupled field-circuit models and semi-analytic permeance models are used to address different aspects of electromagnetic analysis of generators in large hydropower plants. The results include the presentation of a mathematical model that uses concepts from rotating field theory to determine the air-gap flux density waveform in a hydroelectric generator. The model was succesfully used to evaluate armature voltage harmonics and damper bar currents at no-load and load conditions. A second study is concerned with the importance of losses due to rotational fields in core loss calculations. It is found that dynamic and rotational effects typically increase the total core loss estimates with about 28% in large hydroelectric generators. In a third study, linear models for the calculation of salient pole shoe form factors at an arbitrary level of magnetic loading are presented. The effect of the damper winding configuration on the damping capability of salient-pole generators is then evaluated in a separate study. The predicted impact of the coupling between damper cages on adjacent poles on the damping torque production is verified in a set of experiments.

After decades of routine operation, the hydropower industry faces new challenges. Large-scale integration of other renewable sources of generation in the power system accentuates the role of hydropower as a regulating resource. At the same time, an extensive reinvestment programme has commenced where many old components and apparatus are being refurbished or replaced. Introduction of new technical solutions in existing power plants requires good systems knowledge and careful consideration. Important tools for research, development and analysis are suitable mathematical models, numerical simulation methods and laboratory equipment. This doctoral thesis is devoted to studies of the electromechanical interaction between hydropower units and the power system. The work encompasses development of mathematical models, empirical methods for system identification, as well as numerical and experimental studies of hydropower generator and power system interaction. Two generator modelling approaches are explored: one based on electromagnetic field theory and the finite element method, and one based on equivalent electric circuits. The finite element model is adapted for single-machine infinite-bus simulations by the addition of a network equivalent, a mechanical equation and a voltage regulator. Transient simulations using both finite element and equivalent circuit models indicate that the finite element model typically overestimates the synchronising and damping properties of the machine. Identification of model parameters is performed both numerically and experimentally. A complete set of equivalent circuit parameters is identified through finite element simulation of standard empirical test methods. Another machine model is identified experimentally through frequency response analysis. An extension to the well-known standstill frequency response (SSFR) test is explored, which involves measurement and analysis of damper winding quantities. The test is found to produce models that are suitable for transient power system analysis. Both experimental and numerical studies show that low resistance of the damper winding interpole connections are vital to achieve high attenuation of rotor angle oscillations. Hydropower generator and power system interaction is also studied experimentally during a full-scale startup test of the Nordic power system, where multiple synchronised data acquisition devices are used for measurement of both electrical and mechanical quantities. Observation of a subsynchronous power oscillation leads to an investigation of the torsional stability of hydropower units. In accordance with previous studies, hydropower units are found to be mechanically resilient to subsynchronous power oscillations. However, like any other generating unit, they are dependent on sufficient electrical and mechanical damping. Two experimentally obtained hydraulic damping coefficients for a large Francis turbine runner are presented in the thesis.