No description available.

The effects of the Darlington case on managements prerogatives was that it spelled out what a multi-plant employer must do in the area of plant closure to avoid violating the National Labor Relations Act of 1935. There was also good evidence brought forth to show that management is now bargaining plant closures with union. Thus the conclusion was made that in the area multi-plant employers had lost some power due to the Darlington Case. The General Case is presently in the Courts and until a final court decision is made it is hard to say what effect it will have on managements prerogatives.

The Orange-Fish and Cookhouse tunnels that are part of a major inter-basin water transfer scheme (IBT) act as a pathway for several fish species from the Orange River system to enter the Great Fish and Sundays River systems in South Africa. These include Labeo capensis and L. umbratus. Labeo capensis was restricted to the Orange River system before the inter-basin water transfer scheme. Labeo umbratus occurred naturally in the Orange River and in southern flowing river systems. Previous studies showed that the two species hybridise in Hardap Dam, located in a tributary of the Orange River system in Namibia. There are also unconfirmed reports of hybrids from Darlington Dam on the Sundays River system. The aim of the thesis was to confirm hybridisation in Hardap Dam, assess whether hybridisation between L. capensis and L. umbratus has occurred in Darlington Dam and to gain a better understanding of the diversity of these two species. Morphology (morphometrics and meristics), a nuclear S7 intron and the mitochondrial cytochrome ♭ gene were used to assess for hybridisation. A total of 275 specimens were analysed from across the geographical range of the two species. The two species could be distinguished using morphometrics (dorsal fin base, interorbital width and operculum to eye distance) and meristics (lateral line, origin of the dorsal fin to lateral line, origin of the pelvic fin to lateral line and caudal peduncle scale counts) characters. Hybrids from Hardap and Darlington dams were placed between the two species clusters. Labeo umbratus from the Orange River and southern flowing rivers formed a single cluster. The two species could also be distinguished from each other with six nuclear DNA mutations and hybrids were heterozygous at such sites in both dams. Labeo umbratus populations from the Orange River and southern flowing rivers (Gouritz, Gamtoos, Sundays, Bushmans, Great Fish and Nahoon) formed a single lineage. Analysis of mitochondrial DNA, however, revealed that L. umbratus populations from the Orange River and southern flowing rivers were two lineages that differ from each other by 5 mutations. Labeo capensis could be differentiated from both these lineages. Being maternally inherited, mitochondrial DNA did not reveal hybridisation, but ten specimens with L. capensis haplotypes were found in the Darlington Dam. In Hardap Dam, however, it appears that only L. capensis mitochondrial DNA haplotypes persist, despite morphological and nuclear DNA analysis suggesting that both morphs and hybrids of the two species occur. The genetic integrity of these Labeo species has therefore been compromised in at least Hardap and Darlington dams. The Great Fish and Sundays populations are considered to be under threat of complete introgression. The Kat River and Slagboom Dam populations that were isolated before the IBTs have to remain isolated to protect the genetic integrity of the southern lineage of L. umbratus in these two systems.

4H-SiC-based bipolar junction transistors (BJTs) are attractive devices for high-voltage and high-temperature operations due to their high current capability, low specific on-resistance, and process simplicity. To extend the potential of SiC BJTs to power electronic industrial applications, it is essential to realize high-efficient devices with high-current and low-loss by a reliable and wafer-scale fabrication process. In this thesis, we focus on the improvement of the 4H-SiC BJT performance, including the device optimization and process development. To optimize the 4H-SiC BJT design, a comprehensive study in terms of cell geometries, device scaling, and device layout is performed. The hexagon-cell geometry shows 42% higher current density and 21% lower specific on-resistance at a given maximum current gain compared to the interdigitated finger design. Also, a layout design, called intertwined, is used for 100% usage of the conducting area. A higher current is achieved by saving the inactive portion of the conducting area. Different multi-step etched edge termination techniques with an efficiency of &gt;92% are realized. Regarding the process development, an improved surface passivation is used to reduce the surface recombination and improve the maximum current gain of 4H-SiC BJTs. Moreover, wafer-scale lift-off-free processes for the n- and p-Ohmic contact technologies to 4H-SiC are successfully developed. Both Ohmic metal technologies are based on a self-aligned Ni-silicide (Ni-SALICIDE) process. Regarding the device characterization, a maximum current gain of 40, a specific on-resistance of 20 mΩ·cm2, and a maximum breakdown voltage of 5.85 kV for the 4H-SiC BJTs are measured. By employing the enhanced surface passivation, a maximum current gain of 139 and a specific on-resistance of 579 mΩ·cm2 at the current density of 89 A/cm2 for the 15-kV class BJTs are obtained. Moreover, low-voltage 4H-SiC lateral BJTs and Darlington pair with output current of 1−15 A for high-temperature operations up to 500 °C were fabricated. This thesis focuses on the improvement of the 4H-SiC BJT performance in terms of the device optimization and process development for high-voltage and high-temperature applications. The epilayer design and the device structure and topology are optimized to realize high-efficient BJTs. Also, wafer-scale fabrication process steps are developed to enable realization of high-current devices for the real applications. / <p>QC 20170810</p>

<p>Although traditional hazard analysis techniques, such as failure modes and effect analysis (FMEA), and fault tree analysis (FTA) have been used for a long time, they are not well-suited to handling modern systems with complex software, human-machine interactions, and decision-making procedures. This is mainly because traditional hazard analysis techniques rely on a direct cause-effect chain and have no unified guidance to lead the hazard analysis. The Systems Theoretic Accident Model and Process (STAMP) is based on systems theory to try to find out as much as possible about the factors involved in a hazard, and with providing clear guidance as to the control structure leading to the hazard.</p> <p>The Darlington Nuclear Power Generating Station was the first nuclear plant in the world in which the safety shutdown systems are computer controlled. Although FTA and FMEA have already been applied to these shutdown systems, Ontario power generation felt that it is still useful to try recent advances to evaluate whether they can improve on the previous hazard analysis.</p> <p>This thesis introduces the two most common traditional techniques of hazard analysis, FTA and FMEA, as well as two systemic techniques, STPA (which is a hazard analysis method associated with STAMP), and the Functional Resonance Accident Model (FRAM). The thesis also explains why we chose STPA to apply to the Darlington Shutdown System case, and provides an example of the application as well as an evaluation of its use compared with FMEA and FTA.</p> / Master of Applied Science (MASc)