Plasma-wall interaction plays an essential role in the performance and safety of a fusion reactor. This thesis focuses on the impact of material migration on plasma-facing components. It is based on experiments performed in tokamaks: JET, TEXTOR and ASDEX Upgrade. The objectives of the experiments were to assess fuel and impurity removal under ion cyclotron wall conditioning (ICWC) and plasma impact on diagnostic mirrors. In wall conditioning studies, tracer techniques based on the injection of rare isotopes (15N, 18O) were used to determine conclusively the impact of the respective gases. For the first time, probe surfaces and wall components exposed to ICWC were examined by surface analysis methods. Discharges in hydrogen were the most efficient to erode carbon co-deposits, resulting in a reduction of the initial deuterium content by a factor of two. It was also found that impurities desorbed under ICWC are partly re-deposited on the wall. Plasma impact on diagnostic mirrors was determined by surface analysis of test mirrors exposed at JET. Reflectivity of mirrors from the divertor region was severely decreased due to deposits of beryllium, deuterium, carbon and other impurities. This result points out the need to develop mirror maintenance procedures. Neutron damage on mirrors was simulated by ion irradiation in an ion implanter. It was shown that damage levels similar to those expected in the first wall of a fusion reactor do not produce a significant change in reflectivity. / <p>QC 20160819</p>

Understanding of material migration and its impact on the formation of co-deposited mixed material layers on plasma-facing components is essential for the development of fusion reactors. This thesis focuses on this topic. It is based on experiments performed at JET and TEXTOR tokamaks. The major objectives were to determine: (i) fuel and impurity removal from plasma-facing components by ICWC in different gas mixtures, (ii) fuel and impurity transport connected to ICWC operation, (iii) plasma impact on diagnostic mirrors. All these issues are in line with the ITER needs: mitigation of co-deposition and fuel inventory, and the performance of first mirrors in long-term operation. The novelty in research is demonstrated by several elements. In wall conditioning studies, tracer techniques based on injection of rare isotopes (N-15, O-18) were used to determine conclusively the impact of respective gases. Also, a new approach to ICWC was developed by combining global gas balance studies based on mass spectrometry and the use of multiple surface probes exposed to discharges and then studied ex-situ with accelerator-based techniques. Impact of plasma on diagnostic mirrors was determined after exposure to the entire first experimental campaign in JET-ILW. / <p>QC 20141103</p>