This diploma thesis deals with design of office building with warehouse. The buildings are situated on slightly sloping terrain in cadastre unit of Sudoměřice u Tábora. Both buildings have rectangular shape and are connected with two sides. The Alemat s.r.o. company is internet shop, predominately with electronics. In the office building is also showroom where are some products will be shown. The warehouse will serve for receipt and issue of goods and to store them. The perimeter walls of office building is designed from ceramic block thickness of 250mm, for example Heluz Family 25. The walls will be insulated with 200mm of expanded polystyrene. The foundation construction is designed as foundation strips from plain concrete and permanent formwork brick filled with concrete and reinforced with steel. The ceiling construction is designed as prestressed panels thickness of 250mm. The roof is flat with main hydro isolation made of plasticized PVC foil loaded with pea gravel. The main construction of warehouse will be made of steel frames. The exterior skin of the warehouse will form panels Kingspan thickness of 140mm. The foundation construction is designed as monolithic foundation pads. Between the pads will be monolith grade beams. The roof is designed also from Kingspan panels. To the panel will be mechanically fastened plasticized PVC foil. Roof drainage is designed to rain gutters.

The subject of the diploma thesis is to elaborate the project documentation of a newbuilt wellness hotel located in the village of Lipno nad Vltavou. The building is designed as a non-basement one with three floors. It is visually divided into several parts. On the first floor there are two operational parts – a wellness and a restaurant. On the second and third floor there are small apartments for temporary guests' accommodation. The building foundations are made of concrete and reinforced concrete. The load-bearing structure is made of aerated concrete blocks and sand-lime blocks. The ceiling structures are made of cast-in-place reinforced concrete. The roof of the first floor is designed as a one-layer flat extensive green roof. The roofing of a main reception is designed by a sloping roof and the third floor as three adjoining sloping roofs. These roofs are formed by a system of aerated concrete roof panels and a water-dissipating layer of folded sheet metal. The building is insulated with an external thermal insulation composite system (ETICS). The part of the facade consist of facade cladding strips and part of the render of light color.

A modern answer to the question of what an above-standard multifunctional house in the South Center of Brno should look like in the 21st century. First-class urban comfort of living in the countryside on the banks of the river Svratka near the city center with excellent transport links. The design of the building combines various typologies and operations and seeks to ensure maximum efficiency in the use of the plot, its evaluation and benefits for the environment.

The subject of the master thesis is design of a new detached office building for public administration of Czech Republic Police as a district department in Brno-Černovice. It is presented as a form part of project documentation for a building construction. The building has a cellar and two above-ground floors. It is founded on a strip foundation and pads. The building is roofed by green roof. There are office rooms, sanitary facilities, archives, interrogation rooms, pre-trial detention cells, garages, storage rooms and dog cages in the above-ground part. In the basement, there are technical facilities and shooting range backround. Structural system of the building is wall longitudinal masonry system from clay blocks. The ceiling structure is from cast-in-place reinforced concrete. The part of the building is with ventilated facade a nd rest is insulated with contact thermal insulation.

New town hall for the district of Brno-Brno sever. Central soliter position of mixed use building in green public space. Town hall, library, art center and commercion in ground floor

Planning, optimalization, production management, process management, production, ERP

The diploma thesis is about design and project documentation of fitness and wellness center. The designed object is situated in the outskirts of Havlíčkův Brod in a quiet environment and with direct connection to the city dam. The object is a three-storey partially-basement building with a flat green roof in three levels. The building is based on the base passages of plain concrete, reinforced concrete slabs and beads. The supporting, peripheral and partition walls are designed from the VELOX system. The outer casing consists of cement slab, reinforced concrete core and thermal insulation. In open-plan areas there are designed reinforced concrete columns. The ceiling structure is predominantly designed from reinforced concrete slabs to lost formwork. Part of the facade is plastered, the other part is ventilated. Individual architectural elements divide the object into units and fit into the natural landscape. The object is divided into several tracts where each has its own purpose and specification. In the 1st floor there is a gym, room for trainers and coordinating training room. In the center there is atrium, reception, cloakroom, buffet and public toilets. Vertical communication is possible using a suspended staircase or a hydraulic lift. On the 1st underground floor there is a reception desk and cloakroom for disabled people. In the western part of the tract there is an indoor pool with whirlpool, of course there are cloakrooms divided for men and women. The eastern part of the tract is used as a technical room of air-conditioning, there are also 3 saunas, including a relaxation room and dressing room. All facilities on the 1st underground floor have access to an outdoor park, including a dam and outdoor whirlpools. In the 2nd floor there is a staffing facility, an area for manegement, technical rooms and an outdoor green terrace. The designed object is designed for disabled people. Around the object there is designed a car park for 33 cars.

The subject of this diploma thesis is to continue on the previous atelier work, which was focused on elaboration of a strategic urban-architectural study of the Kraví hora area and the BUT holding located there. A multifunctional facility, which would include activities that BUT still lacks, should be designed there. In any case, it should not be an extension of the teaching, research or accommodation capacities, since there have been built enough of these by BUT recently. At the same time, the proposed activities should not be controversial with the interests of the city. The BUT area at Kraví hora is one of the most valuable areas of the city of Brno. The city, which has tried to buy it from BUT several times, has an eminent interest in this area. However BUT considers it as its "family silver", because they realize its extraordinary value. Nevertheless, due to the binding regulatory conditions, construction possibilities are very limited. The aim of this study is to find such a use of this area, which would be a compromise corresponding to both the city's expectations and the needs of BUT. The intention of the previous project, which has been continued by this diploma thesis, was the removal of unsatisfactory buildings and the reduction of the garden colonies; despite to a study created by the City of Brno but partially kept, cultivated and reorganized; and rebuilding of the BUT area, which will be opened to the public and communicate with park. The public will obtain an access to nowadays inaccessible and impermeable areas by removing inappropriate buildings and fences, as well as by the modification of the public space and creating one major spine communication realized as an extension of the existing road and which will serve only for the supply, hikers and cyclists. The newly founded BUT complex with its strategic location on the top of Kraví hora hill and next to the observatory will invite large number of people not only from the surroundings but a

The diploma thesis deals with the design and elaboration of the project documentation of a polyfunctional house with a café in Kyjov. The new building is located in the northern part of the city. It is a 4 floor object, partlial basement building with a saddle roof. The house is based on plain concrete slabs. The supporting peripheral and internal masonry is designed from POROTHERM brick blocks. In the cafeteria, an open layout is proposed using beams and columns. Ceiling structures are designed from the POROTHERM MIAKO system. The roof structure is designed with a truss with sheet metal cover. The perimeter walls in the 1PP are designed from blocks of loose formwork filled with concrete, which are insulated with extruded polystyrene. The building is functionally divided into 2 parts, each with its own entrance. The café is equipped with a vestibule, its own café, toilet for women and men with cabins for handicapped visitors and a background with a storeroom, dressing room and WC with a hall. The residential part consists of 4 garages and 6 apartments, 2 of which are adapted for the handicapped. The object is designed with natural ventilation. The object is barrier-free. In front of the building is proposed a parking space for 9 seats, 2 of which are designed for handicapped and 2 for apartment owners.

This thesis deals with handling equipment for handling containers 20 "and 40". Design of suspension frame with one telescopic beam is elaborated. In this work an analysis of the load on the device and the design calculation of the structure is elaborated. The suspension frame design with sliding, tilting and rotary positioning is designed to provide hydraulic elements. In the diploma thesis, the strength calculation of the selected construction node is processed and the necessary drawing documentation is created.